[PATCH 3/4] dt-bindings: display: bridge: thc63lvd1024: Convert binding to YAML
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Apr 6 11:15:43 UTC 2020
Hi Jacopo,
On Mon, Apr 06, 2020 at 08:40:31AM +0200, Jacopo Mondi wrote:
> On Mon, Apr 06, 2020 at 02:23:17AM +0300, Laurent Pinchart wrote:
> > Convert the Thine THC63LVD1024 text binding to YAML.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > ---
> > .../display/bridge/thine,thc63lvd1024.txt | 66 ----------
> > .../display/bridge/thine,thc63lvd1024.yaml | 121 ++++++++++++++++++
> > 2 files changed, 121 insertions(+), 66 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > create mode 100644 Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > deleted file mode 100644
> > index d17d1e5820d7..000000000000
> > --- a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.txt
> > +++ /dev/null
> > @@ -1,66 +0,0 @@
> > -Thine Electronics THC63LVD1024 LVDS decoder
> > --------------------------------------------
> > -
> > -The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS streams
> > -to parallel data outputs. The chip supports single/dual input/output modes,
> > -handling up to two LVDS input streams and up to two digital CMOS/TTL outputs.
> > -
> > -Single or dual operation mode, output data mapping and DDR output modes are
> > -configured through input signals and the chip does not expose any control bus.
> > -
> > -Required properties:
> > -- compatible: Shall be "thine,thc63lvd1024"
> > -- vcc-supply: Power supply for TTL output, TTL CLOCKOUT signal, LVDS input,
> > - PPL and digital circuitry
> > -
> > -Optional properties:
> > -- powerdown-gpios: Power down GPIO signal, pin name "/PDWN". Active low
> > -- oe-gpios: Output enable GPIO signal, pin name "OE". Active high
> > -
> > -The THC63LVD1024 video port connections are modeled according
> > -to OF graph bindings specified by Documentation/devicetree/bindings/graph.txt
> > -
> > -Required video port nodes:
> > -- port at 0: First LVDS input port
> > -- port at 2: First digital CMOS/TTL parallel output
> > -
> > -Optional video port nodes:
> > -- port at 1: Second LVDS input port
> > -- port at 3: Second digital CMOS/TTL parallel output
> > -
> > -The device can operate in single-link mode or dual-link mode. In single-link
> > -mode, all pixels are received on port at 0, and port at 1 shall not contain any
> > -endpoint. In dual-link mode, even-numbered pixels are received on port at 0 and
> > -odd-numbered pixels on port at 1, and both port at 0 and port at 1 shall contain
> > -endpoints.
> > -
> > -Example:
> > ---------
> > -
> > - thc63lvd1024: lvds-decoder {
> > - compatible = "thine,thc63lvd1024";
> > -
> > - vcc-supply = <®_lvds_vcc>;
> > - powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
> > -
> > - ports {
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - port at 0 {
> > - reg = <0>;
> > -
> > - lvds_dec_in_0: endpoint {
> > - remote-endpoint = <&lvds_out>;
> > - };
> > - };
> > -
> > - port at 2{
> > - reg = <2>;
> > -
> > - lvds_dec_out_2: endpoint {
> > - remote-endpoint = <&adv7511_in>;
> > - };
> > - };
> > - };
> > - };
> > diff --git a/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
> > new file mode 100644
> > index 000000000000..469ac4a34273
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/bridge/thine,thc63lvd1024.yaml
> > @@ -0,0 +1,121 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/bridge/thine,thc63lvd1024.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Thine Electronics THC63LVD1024 LVDS Decoder
> > +
> > +maintainers:
> > + - Jacopo Mondi <jacopo+renesas at jmondi.org>
>
> Ack
>
> > + - Laurent Pinchart <laurent.pinchart+renesas at ideasonboard.com>
> > +
> > +description: |
> > + The THC63LVD1024 is a dual link LVDS receiver designed to convert LVDS
> > + streams to parallel data outputs. The chip supports single/dual input/output
> > + modes, handling up to two LVDS input streams and up to two digital CMOS/TTL
> > + outputs.
> > +
> > + Single or dual operation mode, output data mapping and DDR output modes are
> > + configured through input signals and the chip does not expose any control
> > + bus.
> > +
> > +properties:
> > + compatible:
> > + const: thine,thc63lvd1024
> > +
> > + ports:
> > + type: object
> > + description: |
> > + This device has four video ports. Their connections are modeled using the
> > + OF graph bindings specified in Documentation/devicetree/bindings/graph.txt.
> > +
> > + The device can operate in single-link mode or dual-link mode. In
> > + single-link mode, all pixels are received on port at 0, and port at 1 shall not
> > + contain any endpoint. In dual-link mode, even-numbered pixels are
> > + received on port at 0 and odd-numbered pixels on port at 1, and both port at 0 and
> > + port at 1 shall contain endpoints.
>
> I wonder why we have documented only single/dual input mode and not
> single/dual output mode too. The driver only supports single input and
> single output, but this might be a good occasion to document the
> output port mapping as well.
>
> How about
>
> The device can operate in single or dual input and output modes.
>
> When operating in single input mode, all pixels are received on
> port at 0, and port at 1 shall not contain any endpoint. In dual input
> mode, even-numbered pixels are received on port at 0 and
> odd-numbered pixels on port at 1, and both port at 0 and port at 1 shall
> contain endpoints.
>
> When operating in single output mode all pixels are output from
> the first CMOS/TTL port and port at 3 shall not contain any
> endpoint. In dual output mode pixels are output from both
> CMOS/TTL ports and both port at 2 and port at 3 shall contain
> endpoints.
This is a good idea, but I'll split it to a separate patch as it makes
sense to review it independently of the conversion.
> With or without this, as the new bindings are not worse than what they
> where already:
>
> Reviewed-by: Jacopo Mondi <jacopo+renesas at jmondi.org>
>
> > +
> > + properties:
> > + '#address-cells':
> > + const: 1
> > +
> > + '#size-cells':
> > + const: 0
> > +
> > + port at 0:
> > + type: object
> > + description: First LVDS input port
> > +
> > + port at 1:
> > + type: object
> > + description: Second LVDS input port
> > +
> > + port at 2:
> > + type: object
> > + description: First digital CMOS/TTL parallel output
> > +
> > + port at 3:
> > + type: object
> > + description: Second digital CMOS/TTL parallel output
> > +
> > + required:
> > + - port at 0
> > + - port at 2
> > +
> > + additionalProperties: false
> > +
> > + oe-gpios:
> > + maxItems: 1
> > + description: Output enable GPIO signal, pin name "OE", active high.
> > +
> > + powerdown-gpios:
> > + maxItems: 1
> > + description: Power down GPIO signal, pin name "/PDWN", active low.
> > +
> > + vcc-supply:
> > + maxItems: 1
> > + description:
> > + Power supply for the TTL output, TTL CLOCKOUT signal, LVDS input, PLL and
> > + digital circuitry.
> > +
> > +required:
> > + - compatible
> > + - ports
> > + - vcc-supply
> > +
> > +additionalProperties: false
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/gpio/gpio.h>
> > +
> > + lvds-decoder {
> > + compatible = "thine,thc63lvd1024";
> > +
> > + vcc-supply = <®_lvds_vcc>;
> > + powerdown-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>;
> > +
> > + ports {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + port at 0 {
> > + reg = <0>;
> > +
> > + lvds_dec_in_0: endpoint {
> > + remote-endpoint = <&lvds_out>;
> > + };
> > + };
> > +
> > + port at 2 {
> > + reg = <2>;
> > +
> > + lvds_dec_out_2: endpoint {
> > + remote-endpoint = <&adv7511_in>;
> > + };
> > + };
> > + };
> > + };
> > +
> > +...
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list