[PATCH V5 2/4] backlight: qcom-wled: Add callback functions

Kiran Gunda kgunda at codeaurora.org
Tue Apr 7 15:47:08 UTC 2020


Add wled_cabc_config, wled_sync_toggle, wled_ovp_fault_status
and wled_ovp_delay and wled_auto_detection_required callback
functions to prepare the driver for adding WLED5 support.

Signed-off-by: Kiran Gunda <kgunda at codeaurora.org>
Signed-off-by: Subbaraman Narayanamurthy <subbaram at codeaurora.org>
---
 drivers/video/backlight/qcom-wled.c | 216 ++++++++++++++++++++++++------------
 1 file changed, 144 insertions(+), 72 deletions(-)

diff --git a/drivers/video/backlight/qcom-wled.c b/drivers/video/backlight/qcom-wled.c
index 3d276b3..a6ddaa9 100644
--- a/drivers/video/backlight/qcom-wled.c
+++ b/drivers/video/backlight/qcom-wled.c
@@ -147,6 +147,7 @@ struct wled {
 	u32 max_brightness;
 	u32 short_count;
 	u32 auto_detect_count;
+	u32 version;
 	bool disabled_by_short;
 	bool has_short_detect;
 	int short_irq;
@@ -154,7 +155,33 @@ struct wled {
 
 	struct wled_config cfg;
 	struct delayed_work ovp_work;
+
+	/* Configures the brightness. Applicable for wled3, wled4 and wled5 */
 	int (*wled_set_brightness)(struct wled *wled, u16 brightness);
+
+	/* Configures the cabc register. Applicable for wled4 and wled5 */
+	int (*wled_cabc_config)(struct wled *wled, bool enable);
+
+	/*
+	 * Toggles the sync bit for the brightness update to take place.
+	 * Applicable for WLED3, WLED4 and WLED5.
+	 */
+	int (*wled_sync_toggle)(struct wled *wled);
+
+	/* Determines OVP fault status. Applicable for WLED4 and WLED5 */
+	int (*wled_ovp_fault_status)(struct wled *wled, bool *fault_set);
+
+	/*
+	 * Time to wait before checking the OVP status after wled module enable.
+	 * Applicable for WLED4 and WLED5.
+	 */
+	int (*wled_ovp_delay)(struct wled *wled);
+
+	/*
+	 * Determines if the auto string detection is required.
+	 * Applicable for WLED4 and WLED5
+	 */
+	bool (*wled_auto_detection_required)(struct wled *wled);
 };
 
 static int wled3_set_brightness(struct wled *wled, u16 brightness)
@@ -237,7 +264,7 @@ static int wled_module_enable(struct wled *wled, int val)
 	return 0;
 }
 
-static int wled_sync_toggle(struct wled *wled)
+static int wled3_sync_toggle(struct wled *wled)
 {
 	int rc;
 	unsigned int mask = GENMASK(wled->max_string_count - 1, 0);
@@ -255,6 +282,46 @@ static int wled_sync_toggle(struct wled *wled)
 	return rc;
 }
 
+static int wled4_ovp_fault_status(struct wled *wled, bool *fault_set)
+{
+	int rc;
+	u32 int_rt_sts, fault_sts;
+
+	*fault_set = false;
+	rc = regmap_read(wled->regmap,
+			wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS,
+			&int_rt_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read INT_RT_STS rc=%d\n", rc);
+		return rc;
+	}
+
+	rc = regmap_read(wled->regmap,
+			wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS,
+			&fault_sts);
+	if (rc < 0) {
+		dev_err(wled->dev, "Failed to read FAULT_STATUS rc=%d\n", rc);
+		return rc;
+	}
+
+	if (int_rt_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS)
+		*fault_set = true;
+
+	if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT)
+		*fault_set = true;
+
+	if (*fault_set)
+		dev_dbg(wled->dev, "WLED OVP fault detected, int_rt_sts=0x%x fault_sts=0x%x\n",
+			int_rt_sts, fault_sts);
+
+	return rc;
+}
+
+static int wled4_ovp_delay(struct wled *wled)
+{
+	return WLED_SOFT_START_DLY_US;
+}
+
 static int wled_update_status(struct backlight_device *bl)
 {
 	struct wled *wled = bl_get_data(bl);
@@ -275,7 +342,7 @@ static int wled_update_status(struct backlight_device *bl)
 			goto unlock_mutex;
 		}
 
-		rc = wled_sync_toggle(wled);
+		rc = wled->wled_sync_toggle(wled);
 		if (rc < 0) {
 			dev_err(wled->dev, "wled sync failed rc:%d\n", rc);
 			goto unlock_mutex;
@@ -298,6 +365,25 @@ static int wled_update_status(struct backlight_device *bl)
 	return rc;
 }
 
+static int wled4_cabc_config(struct wled *wled, bool enable)
+{
+	int i, j, rc;
+	u8 val;
+
+	for (i = 0; i < wled->cfg.num_strings; i++) {
+		j = wled->cfg.enabled_strings[i];
+
+		val = enable ? WLED4_SINK_REG_STR_CABC_MASK : 0;
+		rc = regmap_update_bits(wled->regmap, wled->sink_addr +
+					WLED4_SINK_REG_STR_CABC(j),
+					WLED4_SINK_REG_STR_CABC_MASK, val);
+		if (rc < 0)
+			return rc;
+	}
+
+	return 0;
+}
+
 #define WLED_SHORT_DLY_MS			20
 #define WLED_SHORT_CNT_MAX			5
 #define WLED_SHORT_RESET_CNT_DLY_US		USEC_PER_SEC
@@ -345,9 +431,10 @@ static irqreturn_t wled_short_irq_handler(int irq, void *_wled)
 
 static void wled_auto_string_detection(struct wled *wled)
 {
-	int rc = 0, i;
-	u32 sink_config = 0, int_sts;
+	int rc = 0, i, delay_time_us;
+	u32 sink_config = 0;
 	u8 sink_test = 0, sink_valid = 0, val;
+	bool fault_set;
 
 	/* Read configured sink configuration */
 	rc = regmap_read(wled->regmap, wled->sink_addr +
@@ -376,14 +463,9 @@ static void wled_auto_string_detection(struct wled *wled)
 	}
 
 	if (wled->cfg.cabc) {
-		for (i = 0; i < wled->cfg.num_strings; i++) {
-			rc = regmap_update_bits(wled->regmap, wled->sink_addr +
-						WLED4_SINK_REG_STR_CABC(i),
-						WLED4_SINK_REG_STR_CABC_MASK,
-						0);
-			if (rc < 0)
-				goto failed_detect;
-		}
+		rc = wled->wled_cabc_config(wled, false);
+		if (rc < 0)
+			goto failed_detect;
 	}
 
 	/* Disable all sinks */
@@ -427,18 +509,17 @@ static void wled_auto_string_detection(struct wled *wled)
 			goto failed_detect;
 		}
 
-		usleep_range(WLED_SOFT_START_DLY_US,
-			     WLED_SOFT_START_DLY_US + 1000);
+		delay_time_us = wled->wled_ovp_delay(wled);
+		usleep_range(delay_time_us, delay_time_us + 1000);
 
-		rc = regmap_read(wled->regmap, wled->ctrl_addr +
-				 WLED3_CTRL_REG_INT_RT_STS, &int_sts);
+		rc = wled->wled_ovp_fault_status(wled, &fault_set);
 		if (rc < 0) {
-			dev_err(wled->dev, "Error in reading WLED3_CTRL_INT_RT_STS rc=%d\n",
+			dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n",
 				rc);
 			goto failed_detect;
 		}
 
-		if (int_sts & WLED3_CTRL_REG_OVP_FAULT_STATUS)
+		if (fault_set)
 			dev_dbg(wled->dev, "WLED OVP fault detected with SINK %d\n",
 				i + 1);
 		else
@@ -478,30 +559,30 @@ static void wled_auto_string_detection(struct wled *wled)
 	}
 
 	/* Enable valid sinks */
-	for (i = 0; i < wled->cfg.num_strings; i++) {
-		if (wled->cfg.cabc) {
-			rc = regmap_update_bits(wled->regmap, wled->sink_addr +
-						WLED4_SINK_REG_STR_CABC(i),
-						WLED4_SINK_REG_STR_CABC_MASK,
-						WLED4_SINK_REG_STR_CABC_MASK);
-			if (rc < 0)
+	if (wled->version == 4) {
+		for (i = 0; i < wled->cfg.num_strings; i++) {
+			if (sink_config &
+			    BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
+				val = WLED4_SINK_REG_STR_MOD_MASK;
+			else
+				/* Disable modulator_en for unused sink */
+				val = 0;
+
+			rc = regmap_write(wled->regmap, wled->sink_addr +
+					  WLED4_SINK_REG_STR_MOD_EN(i), val);
+			if (rc < 0) {
+				dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
+					rc);
 				goto failed_detect;
-		}
-
-		if (sink_config & BIT(WLED4_SINK_REG_CURR_SINK_SHFT + i))
-			val = WLED4_SINK_REG_STR_MOD_MASK;
-		else
-			val = 0x0; /* Disable modulator_en for unused sink */
-
-		rc = regmap_write(wled->regmap, wled->sink_addr +
-				  WLED4_SINK_REG_STR_MOD_EN(i), val);
-		if (rc < 0) {
-			dev_err(wled->dev, "Failed to configure MODULATOR_EN rc=%d\n",
-				rc);
-			goto failed_detect;
+			}
 		}
 	}
 
+	/* Enable CABC */
+	rc = wled->wled_cabc_config(wled, true);
+	if (rc < 0)
+		goto failed_detect;
+
 	/* Restore the feedback setting */
 	rc = regmap_write(wled->regmap,
 			  wled->ctrl_addr + WLED3_CTRL_REG_FEEDBACK_CONTROL, 0);
@@ -534,7 +615,7 @@ static void wled_auto_string_detection(struct wled *wled)
 
 #define WLED_AUTO_DETECT_OVP_COUNT		5
 #define WLED_AUTO_DETECT_CNT_DLY_US		USEC_PER_SEC
-static bool wled_auto_detection_required(struct wled *wled)
+static bool wled4_auto_detection_required(struct wled *wled)
 {
 	s64 elapsed_time_us;
 
@@ -570,29 +651,19 @@ static bool wled_auto_detection_required(struct wled *wled)
 static int wled_auto_detection_at_init(struct wled *wled)
 {
 	int rc;
-	u32 fault_status, rt_status;
+	bool fault_set;
 
 	if (!wled->cfg.auto_detection_enabled)
 		return 0;
 
-	rc = regmap_read(wled->regmap,
-			 wled->ctrl_addr + WLED3_CTRL_REG_INT_RT_STS,
-			 &rt_status);
-	if (rc < 0) {
-		dev_err(wled->dev, "Failed to read RT status rc=%d\n", rc);
-		return rc;
-	}
-
-	rc = regmap_read(wled->regmap,
-			 wled->ctrl_addr + WLED3_CTRL_REG_FAULT_STATUS,
-			 &fault_status);
+	rc = wled->wled_ovp_fault_status(wled, &fault_set);
 	if (rc < 0) {
-		dev_err(wled->dev, "Failed to read fault status rc=%d\n", rc);
+		dev_err(wled->dev, "Error in getting OVP fault_sts, rc=%d\n",
+			rc);
 		return rc;
 	}
 
-	if ((rt_status & WLED3_CTRL_REG_OVP_FAULT_STATUS) ||
-	    (fault_status & WLED3_CTRL_REG_OVP_FAULT_BIT)) {
+	if (fault_set) {
 		mutex_lock(&wled->lock);
 		wled_auto_string_detection(wled);
 		mutex_unlock(&wled->lock);
@@ -629,7 +700,7 @@ static irqreturn_t wled_ovp_irq_handler(int irq, void *_wled)
 			int_sts, fault_sts);
 
 	if (fault_sts & WLED3_CTRL_REG_OVP_FAULT_BIT) {
-		if (wled_auto_detection_required(wled)) {
+		if (wled->wled_auto_detection_required(wled)) {
 			mutex_lock(&wled->lock);
 			wled_auto_string_detection(wled);
 			mutex_unlock(&wled->lock);
@@ -811,17 +882,12 @@ static int wled4_setup(struct wled *wled)
 					wled->cfg.string_i_limit);
 		if (rc < 0)
 			return rc;
-
-		addr = wled->sink_addr +
-				WLED4_SINK_REG_STR_CABC(j);
-		rc = regmap_update_bits(wled->regmap, addr,
-					WLED4_SINK_REG_STR_CABC_MASK,
-					wled->cfg.cabc ?
-					WLED4_SINK_REG_STR_CABC_MASK : 0);
-		if (rc < 0)
-			return rc;
 	}
 
+	rc = wled4_cabc_config(wled, wled->cfg.cabc);
+	if (rc < 0)
+		return rc;
+
 	rc = regmap_update_bits(wled->regmap, wled->ctrl_addr +
 				WLED3_CTRL_REG_MOD_EN,
 				WLED3_CTRL_REG_MOD_EN_MASK,
@@ -835,7 +901,7 @@ static int wled4_setup(struct wled *wled)
 	if (rc < 0)
 		return rc;
 
-	rc = wled_sync_toggle(wled);
+	rc = wled->wled_sync_toggle(wled);
 	if (rc < 0) {
 		dev_err(wled->dev, "Failed to toggle sync reg rc:%d\n", rc);
 		return rc;
@@ -951,7 +1017,7 @@ static u32 wled_values(const struct wled_var_cfg *cfg, u32 idx)
 	return idx;
 }
 
-static int wled_configure(struct wled *wled, int version)
+static int wled_configure(struct wled *wled)
 {
 	struct wled_config *cfg = &wled->cfg;
 	struct device *dev = wled->dev;
@@ -1035,12 +1101,13 @@ static int wled_configure(struct wled *wled, int version)
 	if (rc)
 		wled->name = devm_kasprintf(dev, GFP_KERNEL, "%pOFn", dev->of_node);
 
-	switch (version) {
+	switch (wled->version) {
 	case 3:
 		u32_opts = wled3_opts;
 		size = ARRAY_SIZE(wled3_opts);
 		*cfg = wled3_config_defaults;
 		wled->wled_set_brightness = wled3_set_brightness;
+		wled->wled_sync_toggle = wled3_sync_toggle;
 		wled->max_string_count = 3;
 		wled->sink_addr = wled->ctrl_addr;
 		break;
@@ -1050,6 +1117,12 @@ static int wled_configure(struct wled *wled, int version)
 		size = ARRAY_SIZE(wled4_opts);
 		*cfg = wled4_config_defaults;
 		wled->wled_set_brightness = wled4_set_brightness;
+		wled->wled_sync_toggle = wled3_sync_toggle;
+		wled->wled_cabc_config = wled4_cabc_config;
+		wled->wled_ovp_fault_status = wled4_ovp_fault_status;
+		wled->wled_ovp_delay = wled4_ovp_delay;
+		wled->wled_auto_detection_required =
+					wled4_auto_detection_required;
 		wled->max_string_count = 4;
 
 		prop_addr = of_get_address(dev->of_node, 1, NULL, NULL);
@@ -1186,7 +1259,6 @@ static int wled_probe(struct platform_device *pdev)
 	struct backlight_device *bl;
 	struct wled *wled;
 	struct regmap *regmap;
-	int version;
 	u32 val;
 	int rc;
 
@@ -1203,18 +1275,18 @@ static int wled_probe(struct platform_device *pdev)
 	wled->regmap = regmap;
 	wled->dev = &pdev->dev;
 
-	version = (uintptr_t)of_device_get_match_data(&pdev->dev);
-	if (!version) {
+	wled->version = (uintptr_t)of_device_get_match_data(&pdev->dev);
+	if (!wled->version) {
 		dev_err(&pdev->dev, "Unknown device version\n");
 		return -ENODEV;
 	}
 
 	mutex_init(&wled->lock);
-	rc = wled_configure(wled, version);
+	rc = wled_configure(wled);
 	if (rc)
 		return rc;
 
-	switch (version) {
+	switch (wled->version) {
 	case 3:
 		wled->cfg.auto_detection_enabled = false;
 		rc = wled3_setup(wled);
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
 a Linux Foundation Collaborative Project


More information about the dri-devel mailing list