[PATCH 09/21] drm/msm/dpu: Use OPP API to set clk/perf state

[Rajendra Nayak]

On some qualcomm platforms DPU needs to express a perforamnce state
requirement on a power domain depending on the clock rates.
Use OPP table from DT to register with OPP framework and use
dev_pm_opp_set_rate() to set the clk/perf state.

Signed-off-by: Rajendra Nayak <rnayak at codeaurora.org>
Cc: Rob Clark <robdclark at gmail.com>
Cc: Sean Paul <sean at poorly.run>
Cc: dri-devel at lists.freedesktop.org
---
 drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c | 3 ++-
 drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c       | 6 ++++++
 2 files changed, 8 insertions(+), 1 deletion(-)

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
index 11f2beb..fe5717df 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_perf.c
@@ -7,6 +7,7 @@
 #include <linux/debugfs.h>
 #include <linux/errno.h>
 #include <linux/mutex.h>
+#include <linux/pm_opp.h>
 #include <linux/sort.h>
 #include <linux/clk.h>
 #include <linux/bitmap.h>
@@ -239,7 +240,7 @@ static int _dpu_core_perf_set_core_clk_rate(struct dpu_kms *kms, u64 rate)
 		rate = core_clk->max_rate;
 
 	core_clk->rate = rate;
-	return msm_dss_clk_set_rate(core_clk, 1);
+	return dev_pm_opp_set_rate(&kms->pdev->dev, core_clk->rate);
 }
 
 static u64 _dpu_core_perf_get_core_clk_rate(struct dpu_kms *kms)
diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
index ce19f1d..949157a 100644
--- a/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_kms.c
@@ -10,6 +10,7 @@
 #include <linux/debugfs.h>
 #include <linux/dma-buf.h>
 #include <linux/of_irq.h>
+#include <linux/pm_opp.h>
 
 #include <drm/drm_crtc.h>
 #include <drm/drm_file.h>
@@ -1033,6 +1034,9 @@ static int dpu_bind(struct device *dev, struct device *master, void *data)
 	if (!dpu_kms)
 		return -ENOMEM;
 
+	dev_pm_opp_set_clkname(dev, "core");
+	dev_pm_opp_of_add_table(dev);
+
 	mp = &dpu_kms->mp;
 	ret = msm_dss_parse_clock(pdev, mp);
 	if (ret) {
@@ -1059,6 +1063,7 @@ static void dpu_unbind(struct device *dev, struct device *master, void *data)
 	struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
 	struct dss_module_power *mp = &dpu_kms->mp;
 
+	dev_pm_opp_of_remove_table(dev);
 	msm_dss_put_clk(mp->clk_config, mp->num_clk);
 	devm_kfree(&pdev->dev, mp->clk_config);
 	mp->num_clk = 0;
@@ -1090,6 +1095,7 @@ static int __maybe_unused dpu_runtime_suspend(struct device *dev)
 	struct dpu_kms *dpu_kms = platform_get_drvdata(pdev);
 	struct dss_module_power *mp = &dpu_kms->mp;
 
+	dev_pm_opp_set_rate(dev, 0);
 	rc = msm_dss_enable_clk(mp->clk_config, mp->num_clk, false);
 	if (rc)
 		DPU_ERROR("clock disable failed rc:%d\n", rc);
-- 
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation