[PATCH v1] staging: fbtft: fb_st7789v: Initialize the Display

[Dan Carpenter]

On Thu, Apr 09, 2020 at 11:25:32AM +0200, Oliver Graute wrote:
> From: Oliver Graute <oliver.graute at kococonnector.com>
> 
> Set Gamma Values and Register Values for the HSD20_IPS
> 
> Signed-off-by: Oliver Graute <oliver.graute at kococonnector.com>
> ---
>  drivers/staging/fbtft/fb_st7789v.c | 12 ++++++------
>  1 file changed, 6 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/staging/fbtft/fb_st7789v.c b/drivers/staging/fbtft/fb_st7789v.c
> index 84c5af2dc9a0..b0aa96b703a8 100644
> --- a/drivers/staging/fbtft/fb_st7789v.c
> +++ b/drivers/staging/fbtft/fb_st7789v.c
> @@ -17,8 +17,8 @@
>  #define DRVNAME "fb_st7789v"
>  
>  #define DEFAULT_GAMMA \
> -	"70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25\n" \
> -	"70 2C 2E 15 10 09 48 33 53 0B 19 18 20 25"
> +	"D0 05 0A 09 08 05 2E 44 45 0F 17 16 2B 33\n" \
> +	"D0 05 0A 09 08 05 2E 43 45 0F 16 16 2B 33"

How do you know this won't break someone else's setup?

>  
>  /**
>   * enum st7789v_command - ST7789V display controller commands
> @@ -83,13 +83,13 @@ static int init_display(struct fbtft_par *par)
>  	/* set pixel format to RGB-565 */
>  	write_reg(par, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
>  
> -	write_reg(par, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22);
> +	write_reg(par, PORCTRL, 0x05, 0x05, 0x00, 0x33, 0x33);

Without knowing anything at all about this driver, it feels like this
should be:

	if (new_hardware)
		write_reg(par, PORCTRL, 0x05, 0x05, 0x00, 0x33, 0x33);
	else
		write_reg(par, PORCTRL, 0x08, 0x08, 0x00, 0x22, 0x22);

Same comment for the rest of the patch.

regards,
dan carpenter