[PATCH v2 05/22] dt-bindings: host1x: Document new interconnect properties

[Rob Herring]

On Mon, Mar 30, 2020 at 04:08:47AM +0300, Dmitry Osipenko wrote:
> Most of Host1x devices have at least one memory client. These clients
> are directly connected to the memory controller. The new interconnect
> properties represent the memory client's connection to the memory
> controller.
> 
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  .../display/tegra/nvidia,tegra20-host1x.txt   | 68 +++++++++++++++++++
>  1 file changed, 68 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> index 9999255ac5b6..d92d4e814d77 100644
> --- a/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> +++ b/Documentation/devicetree/bindings/display/tegra/nvidia,tegra20-host1x.txt
> @@ -20,6 +20,10 @@ Required properties:
>  - reset-names: Must include the following entries:
>    - host1x
>  
> +Each host1x client module having to perform DMA through the Memory Controller
> +should have the interconnect endpoints set to the Memory Client and External
> +Memory respectively.
> +
>  The host1x top-level node defines a number of children, each representing one
>  of the following host1x client modules:
>  
> @@ -36,6 +40,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - mpe
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the MPE memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.

Is the TRM public? Perhaps refer to the header.

> +
>  - vi: video input
>  
>    Required properties:
> @@ -49,6 +59,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - vi
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the VI memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  - epp: encoder pre-processor
>  
>    Required properties:
> @@ -62,6 +78,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - epp
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the EPP memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  - isp: image signal processor
>  
>    Required properties:
> @@ -75,6 +97,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - isp
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the ISP memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  - gr2d: 2D graphics engine
>  
>    Required properties:
> @@ -88,6 +116,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - 2d
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the GR2D memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  - gr3d: 3D graphics engine
>  
>    Required properties:
> @@ -106,6 +140,12 @@ of the following host1x client modules:
>      - 3d
>      - 3d2 (Only required on SoCs with two 3D clocks)
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the GR3D memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  - dc: display controller
>  
>    Required properties:
> @@ -133,6 +173,10 @@ of the following host1x client modules:
>    - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
>    - nvidia,edid: supplies a binary EDID blob
>    - nvidia,panel: phandle of a display panel
> +  - interconnects: Must contain entry for the DC memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
>  
>  - hdmi: High Definition Multimedia Interface
>  
> @@ -281,6 +325,12 @@ of the following host1x client modules:
>    - reset-names: Must include the following entries:
>      - vic
>  
> +  Optional properties:
> +  - interconnects: Must contain entry for the VIC memory clients.
> +  - interconnect-names: Must include name of the interconnect path for each
> +    interconnect entry. Consult TRM documentation for information about
> +    available memory clients.
> +
>  Example:
>  
>  / {
> @@ -363,6 +413,15 @@ Example:
>  			resets = <&tegra_car 27>;
>  			reset-names = "dc";
>  
> +			interconnects = <&mc TEGRA20_MC_DISPLAY0A &emc>,
> +					<&mc TEGRA20_MC_DISPLAY0B &emc>,
> +					<&mc TEGRA20_MC_DISPLAY0C &emc>,
> +					<&mc TEGRA20_MC_DISPLAY1B &emc>;
> +			interconnect-names = "display0a",
> +					     "display0b",
> +					     "display0c",
> +					     "display1b";
> +
>  			rgb {
>  				status = "disabled";
>  			};
> @@ -378,6 +437,15 @@ Example:
>  			resets = <&tegra_car 26>;
>  			reset-names = "dc";
>  
> +			interconnects = <&mc TEGRA20_MC_DISPLAY0AB &emc>,
> +					<&mc TEGRA20_MC_DISPLAY0BB &emc>,
> +					<&mc TEGRA20_MC_DISPLAY0CB &emc>,
> +					<&mc TEGRA20_MC_DISPLAY1BB &emc>;
> +			interconnect-names = "display0a",
> +					     "display0b",
> +					     "display0c",
> +					     "display1b";
> +
>  			rgb {
>  				status = "disabled";
>  			};
> -- 
> 2.25.1
>