[PATCH AUTOSEL 4.19 30/66] drm/sun4i: dsi: Use NULL to signify "no panel"

Sasha Levin sashal at kernel.org
Sat Apr 11 23:11:27 UTC 2020


From: Samuel Holland <samuel at sholland.org>

[ Upstream commit 0e4e3fb4901d19f49e5c0a582f383b10dda8d1c5 ]

The continued use of an ERR_PTR to signify "no panel" outside of
sun6i_dsi_attach is confusing because it is a double negative. Because
the connector always reports itself as connected, there is also the
possibility of sending an ERR_PTR to drm_panel_get_modes(), which would
crash.

Solve both of these by only storing the panel pointer if it is valid.

Fixes: 133add5b5ad4 ("drm/sun4i: Add Allwinner A31 MIPI-DSI controller support")
Signed-off-by: Samuel Holland <samuel at sholland.org>
Signed-off-by: Maxime Ripard <maxime at cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20200211072858.30784-2-samuel@sholland.org
Signed-off-by: Sasha Levin <sashal at kernel.org>
---
 drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c | 14 ++++++++------
 1 file changed, 8 insertions(+), 6 deletions(-)

diff --git a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
index 79eb11cd185d1..bc9454a562877 100644
--- a/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
+++ b/drivers/gpu/drm/sun4i/sun6i_mipi_dsi.c
@@ -642,7 +642,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	sun6i_dphy_init(dsi->dphy, device->lanes);
 	sun6i_dphy_power_on(dsi->dphy, device->lanes);
 
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_prepare(dsi->panel);
 
 	/*
@@ -657,7 +657,7 @@ static void sun6i_dsi_encoder_enable(struct drm_encoder *encoder)
 	 * ordering on the panels I've tested it with, so I guess this
 	 * will do for now, until that IP is better understood.
 	 */
-	if (!IS_ERR(dsi->panel))
+	if (dsi->panel)
 		drm_panel_enable(dsi->panel);
 
 	sun6i_dsi_start(dsi, DSI_START_HSC);
@@ -673,7 +673,7 @@ static void sun6i_dsi_encoder_disable(struct drm_encoder *encoder)
 
 	DRM_DEBUG_DRIVER("Disabling DSI output\n");
 
-	if (!IS_ERR(dsi->panel)) {
+	if (dsi->panel) {
 		drm_panel_disable(dsi->panel);
 		drm_panel_unprepare(dsi->panel);
 	}
@@ -835,11 +835,13 @@ static int sun6i_dsi_attach(struct mipi_dsi_host *host,
 			    struct mipi_dsi_device *device)
 {
 	struct sun6i_dsi *dsi = host_to_sun6i_dsi(host);
+	struct drm_panel *panel = of_drm_find_panel(device->dev.of_node);
 
+	if (IS_ERR(panel))
+		return PTR_ERR(panel);
+
+	dsi->panel = panel;
 	dsi->device = device;
-	dsi->panel = of_drm_find_panel(device->dev.of_node);
-	if (IS_ERR(dsi->panel))
-		return PTR_ERR(dsi->panel);
 
 	dev_info(host->dev, "Attached device %s\n", device->name);
 
-- 
2.20.1



More information about the dri-devel mailing list