[PATCH v6 5/8] dt-bindings: display: add i.MX6 MIPI DSI host controller doc
Adrian Ratiu
adrian.ratiu at collabora.com
Wed Apr 15 11:28:25 UTC 2020
On Tue, 14 Apr 2020, Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
> Hi Adrian,
>
> Thank you for the patch.
Hi Laurent,
Thank you for the review - you raised some good points which will
be addressed in the next revision (will leave this on review a bit
more).
I will also convert the dw_mipi_dsi.txt to yaml as you suggest and
send that as a separate patch.
Best wishes,
Adrian
>
> On Tue, Apr 14, 2020 at 06:19:52PM +0300, Adrian Ratiu wrote:
>> This provides an example DT binding for the MIPI DSI host
>> controller present on the i.MX6 SoC based on Synopsis
>> DesignWare v1.01 IP. Cc: Rob Herring <robh at kernel.org> Cc:
>> Neil Armstrong <narmstrong at baylibre.com> Cc: Fabio Estevam
>> <festevam at gmail.com> Cc: devicetree at vger.kernel.org Tested-by:
>> Adrian Pop <pop.adrian61 at gmail.com> Tested-by: Arnaud Ferraris
>> <arnaud.ferraris at collabora.com> Signed-off-by: Sjoerd Simons
>> <sjoerd.simons at collabora.com> Signed-off-by: Martyn Welch
>> <martyn.welch at collabora.com> Signed-off-by: Adrian Ratiu
>> <adrian.ratiu at collabora.com> --- Changes since v5:
>> - Fixed missing reg warning (Fabio) - Updated dt-schema and
>> fixed warnings (Rob)
>> Changes since v4:
>> - Fixed yaml binding to pass `make dt_binding_check
>> dtbs_check` and addressed received binding feedback (Rob)
>> Changes since v3:
>> - Added commit message (Neil) - Converted to yaml format
>> (Neil) - Minor dt node + driver fixes (Rob) - Added small
>> panel example to the host controller binding
>> Changes since v2:
>> - Fixed commit tags (Emil)
>> ---
>> .../display/imx/fsl,mipi-dsi-imx6.yaml | 139
>> ++++++++++++++++++ 1 file changed, 139 insertions(+) create
>> mode 100644
>> Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
>> diff --git
>> a/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
>> b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
>> new file mode 100644 index 000000000000..10e289ea219a ---
>> /dev/null +++
>> b/Documentation/devicetree/bindings/display/imx/fsl,mipi-dsi-imx6.yaml
>> @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR
>> BSD-2-Clause) +%YAML 1.2 +--- +$id:
>> http://devicetree.org/schemas/display/imx/fsl,mipi-dsi-imx6.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml# +
>> +title: Freescale i.MX6 DW MIPI DSI Host Controller +
>> +maintainers: + - Adrian Ratiu <adrian.ratiu at collabora.com> +
>> +description: | + The i.MX6 DSI host controller is a Synopsys
>> DesignWare MIPI DSI v1.01 + IP block with a companion PHY IP.
>> + + These DT bindings follow the Synopsys DW MIPI DSI bindings
>> defined in +
>> Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
>> with + the following device-specific properties.
>
> Not necessarily a prerequisite for this patch, but it would be
> nice to get that converted to yaml, and included here with
>
> allOf:
> $ref: ../bridge/snps,dw-mipi-dsi.yaml#
>
> (assuming that's how the file will be called).
>
Yes, I will do this conversion but in a separate patch to avoid
making this series bigger.
Thanks,
Adrian
>> +
>> +properties:
>> + compatible:
>> + items:
>> + - const: fsl,imx6q-mipi-dsi
>> + - const: snps,dw-mipi-dsi
>> +
>> + reg:
>> + maxItems: 1
>> +
>> + interrupts:
>> + maxItems: 1
>> +
>> + clocks:
>> + items:
>> + - description: Module Clock
>> + - description: DSI bus clock
>> +
>> + clock-names:
>> + items:
>> + - const: ref
>> + - const: pclk
>> +
>> + fsl,gpr:
>> + description: Phandle to the iomuxc-gpr region containing the multiplexer control register.
>
> Could you please wrap liens at a 80 columns boundary ?
>
>> + $ref: /schemas/types.yaml#/definitions/phandle
>> +
>> + ports:
>> + type: object
>> + description: |
>> + A node containing DSI input & output port nodes with endpoint
>> + definitions as documented in
>> + Documentation/devicetree/bindings/media/video-interfaces.txt
>> + Documentation/devicetree/bindings/graph.txt
>> + properties:
>
> You should add
>
> '#address-cells':
> const: 1
>
> '#size-cells':
> const: 0
>
>> + port at 0:
>> + type: object
>> + description:
>> + DSI input port node, connected to the ltdc rgb output port.
>> +
>> + port at 1:
>> + type: object
>> + description:
>> + DSI output port node, connected to a panel or a bridge input port"
>
>
> Should this be "RGB output port node" ? And s/"/./
>
> And here you should add
>
> additionalProperties: false
>
>> +
>> +patternProperties:
>> + "^panel@[0-3]$":
>> + type: object
>> + description: |
>> + A node containing the panel or bridge description as documented in
>> + Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
>> + properties:
>> + port:
>> + type: object
>> + description:
>> + Panel or bridge port node, connected to the DSI output port (port at 1)
>
> Does this belong here ? I think the port property for the panel needs to
> be described in the panel's binding instead.
>
>> +
>> + "#address-cells":
>> + const: 1
>> +
>> + "#size-cells":
>> + const: 0
>
> These two properties are not pattern properties, right ? Should they be
> listed under the properties above ?
>
>> +
>> +required:
>> + - "#address-cells"
>> + - "#size-cells"
>> + - compatible
>> + - reg
>> + - interrupts
>> + - clocks
>> + - clock-names
>> + - ports
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |+
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> + #include <dt-bindings/clock/imx6qdl-clock.h>
>> + #include <dt-bindings/gpio/gpio.h>
>
> Alphabetical order ?
>
>> +
>> + dsi: dsi at 21e0000 {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + compatible = "fsl,imx6q-mipi-dsi", "snps,dw-mipi-dsi";
>> + reg = <0x021e0000 0x4000>;
>> + interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
>> + fsl,gpr = <&gpr>;
>> + clocks = <&clks IMX6QDL_CLK_MIPI_CORE_CFG>,
>> + <&clks IMX6QDL_CLK_MIPI_IPG>;
>> + clock-names = "ref", "pclk";
>> +
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + port at 1 {
>> + reg = <1>;
>> + dsi_out: endpoint {
>> + remote-endpoint = <&panel_in>;
>> + };
>> + };
>> + };
>> +
>> + panel at 0 {
>> + compatible = "sharp,ls032b3sx01";
>> + reg = <0>;
>> + reset-gpios = <&gpio6 8 GPIO_ACTIVE_LOW>;
>> + ports {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> + port at 0 {
>> + reg = <0>;
>> + panel_in: endpoint {
>> + remote-endpoint = <&dsi_out>;
>> + };
>> + };
>> + };
>> + };
>> + };
>> +
>> +...
>
> --
> Regards,
>
> Laurent Pinchart
More information about the dri-devel
mailing list