[PATCH v3 2/2] drm/tegra: output: rgb: Support LVDS encoder bridge

[Laurent Pinchart]

Hi Dmitry,

Thank you for the patch.

On Thu, Apr 16, 2020 at 08:24:05PM +0300, Dmitry Osipenko wrote:
> Newer Tegra device-trees will specify a video output graph that involves
> LVDS encoder bridge, This patch adds support for the LVDS encoder bridge
> to the RGB output, allowing us to model display hardware properly.
> 
> Signed-off-by: Dmitry Osipenko <digetx at gmail.com>
> ---
>  drivers/gpu/drm/tegra/drm.h    |  2 ++
>  drivers/gpu/drm/tegra/output.c | 10 ++++++++++
>  drivers/gpu/drm/tegra/rgb.c    | 34 ++++++++++++++++++++++++++++++++++
>  3 files changed, 46 insertions(+)
> 
> diff --git a/drivers/gpu/drm/tegra/drm.h b/drivers/gpu/drm/tegra/drm.h
> index 804869799305..cccd368b6752 100644
> --- a/drivers/gpu/drm/tegra/drm.h
> +++ b/drivers/gpu/drm/tegra/drm.h
> @@ -12,6 +12,7 @@
>  #include <linux/of_gpio.h>
>  
>  #include <drm/drm_atomic.h>
> +#include <drm/drm_bridge.h>
>  #include <drm/drm_edid.h>
>  #include <drm/drm_encoder.h>
>  #include <drm/drm_fb_helper.h>
> @@ -116,6 +117,7 @@ struct tegra_output {
>  	struct device_node *of_node;
>  	struct device *dev;
>  
> +	struct drm_bridge *bridge;
>  	struct drm_panel *panel;
>  	struct i2c_adapter *ddc;
>  	const struct edid *edid;
> diff --git a/drivers/gpu/drm/tegra/output.c b/drivers/gpu/drm/tegra/output.c
> index a6a711d54e88..37fc6b8c173f 100644
> --- a/drivers/gpu/drm/tegra/output.c
> +++ b/drivers/gpu/drm/tegra/output.c
> @@ -180,6 +180,16 @@ int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
>  	int connector_type;
>  	int err;
>  
> +	if (output->bridge) {
> +		err = drm_bridge_attach(&output->encoder, output->bridge,
> +					NULL, DRM_BRIDGE_ATTACH_NO_CONNECTOR);

Using DRM_BRIDGE_ATTACH_NO_CONNECTOR is definitely the way to go, but
please be aware that it will require creating a connector and an encoder
manually (which I think this driver already does), and using the bridge
operations to implement the connector operations. I highly recommend
using the DRM bridge connector helper for this purpose.

> +		if (err) {
> +			dev_err(output->dev, "cannot connect bridge: %d\n",
> +				err);
> +			return err;
> +		}
> +	}
> +
>  	if (output->panel) {

May I also recommend switching to the DRM panel bridge helper ? It will
simplify the code.

>  		err = drm_panel_attach(output->panel, &output->connector);
>  		if (err < 0)
> diff --git a/drivers/gpu/drm/tegra/rgb.c b/drivers/gpu/drm/tegra/rgb.c
> index 0562a7eb793f..0df213e92664 100644
> --- a/drivers/gpu/drm/tegra/rgb.c
> +++ b/drivers/gpu/drm/tegra/rgb.c
> @@ -5,6 +5,7 @@
>   */
>  
>  #include <linux/clk.h>
> +#include <linux/of_graph.h>
>  
>  #include <drm/drm_atomic_helper.h>
>  #include <drm/drm_panel.h>
> @@ -210,6 +211,7 @@ static const struct drm_encoder_helper_funcs tegra_rgb_encoder_helper_funcs = {
>  
>  int tegra_dc_rgb_probe(struct tegra_dc *dc)
>  {
> +	const unsigned int encoder_port = 0, panel_port = 1;
>  	struct device_node *np;
>  	struct tegra_rgb *rgb;
>  	int err;
> @@ -226,6 +228,38 @@ int tegra_dc_rgb_probe(struct tegra_dc *dc)
>  	rgb->output.of_node = np;
>  	rgb->dc = dc;
>  
> +	/*
> +	 * Tegra devices that have LVDS panel utilize LVDS-encoder bridge
> +	 * for converting 24/18 RGB data-lanes into 8 lanes. Encoder usually
> +	 * have a powerdown control which needs to be enabled in order to
> +	 * transfer data to the panel. Historically devices that use an older
> +	 * device-tree version didn't model the bridge, assuming that encoder
> +	 * is turned ON by default, while today's DRM allows us to model LVDS
> +	 * encoder properly.
> +	 *
> +	 * Newer device-trees may utilize output->encoder->panel graph.
> +	 *
> +	 * For older device-trees we fall back to use nvidia,panel phandle.
> +	 */
> +	np = of_graph_get_remote_node(rgb->output.of_node, encoder_port, -1);
> +	if (np) {
> +		rgb->output.bridge = of_drm_find_bridge(np);
> +		of_node_put(np);
> +
> +		if (!rgb->output.bridge)
> +			return -EPROBE_DEFER;
> +
> +		np = of_graph_get_remote_node(rgb->output.bridge->of_node,
> +					      panel_port, -1);

This shouldn't be needed, the LVDS codec bridge driver should already
get the panel and handle it internally. You only need to handle panels
in this driver when they're connected directly to the RGB input.

> +		if (np) {
> +			rgb->output.panel = of_drm_find_panel(np);
> +			of_node_put(np);
> +
> +			if (IS_ERR(rgb->output.panel))
> +				return PTR_ERR(rgb->output.panel);
> +		}
> +	}
> +
>  	err = tegra_output_probe(&rgb->output);
>  	if (err < 0)
>  		return err;

-- 
Regards,

Laurent Pinchart