[PATCH 1/1] AMDGPU: Correctly initialize thermal controller for GPUs with Powerplay table v0 (e.g Hawaii)

[Sandeep Raghuraman]

Initialize thermal controller fields in the PowerPlay table for Hawaii
GPUs, so that fan speeds are reported.

Signed-off-by: Sandeep Raghuraman <sandy.8925 at gmail.com>

---
 .../drm/amd/powerplay/hwmgr/processpptables.c | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
index 77c14671866c..bb58cfab1033 100644
--- a/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
+++ b/drivers/gpu/drm/amd/powerplay/hwmgr/processpptables.c
@@ -984,6 +984,34 @@ static int init_thermal_controller(
 			struct pp_hwmgr *hwmgr,
 			const ATOM_PPLIB_POWERPLAYTABLE *powerplay_table)
 {
+	hwmgr->thermal_controller.ucType = 
+			powerplay_table->sThermalController.ucType;
+	hwmgr->thermal_controller.ucI2cLine = 
+			powerplay_table->sThermalController.ucI2cLine;
+	hwmgr->thermal_controller.ucI2cAddress = 
+			powerplay_table->sThermalController.ucI2cAddress;
+
+	hwmgr->thermal_controller.fanInfo.bNoFan =
+		(0 != (powerplay_table->sThermalController.ucFanParameters & 
+			ATOM_PP_FANPARAMETERS_NOFAN));
+
+	hwmgr->thermal_controller.fanInfo.ucTachometerPulsesPerRevolution =
+		powerplay_table->sThermalController.ucFanParameters &
+		ATOM_PP_FANPARAMETERS_TACHOMETER_PULSES_PER_REVOLUTION_MASK;
+
+	hwmgr->thermal_controller.fanInfo.ulMinRPM
+		= powerplay_table->sThermalController.ucFanMinRPM * 100UL;
+	hwmgr->thermal_controller.fanInfo.ulMaxRPM
+		= powerplay_table->sThermalController.ucFanMaxRPM * 100UL;
+
+	set_hw_cap(
+			hwmgr,
+			ATOM_PP_THERMALCONTROLLER_NONE != hwmgr->thermal_controller.ucType,
+			PHM_PlatformCaps_ThermalController
+		  );
+
+	hwmgr->thermal_controller.use_hw_fan_control = 1;
+
 	return 0;
 }
 
--