[PATCH v5 1/8] drm/fourcc: Add modifier definitions for describing Amlogic Video Framebuffer Compression

[Daniel Vetter]

On Fri, Apr 17, 2020 at 6:05 PM Neil Armstrong <narmstrong at baylibre.com> wrote:
>
> On 17/04/2020 17:07, Daniel Vetter wrote:
> > On Thu, Apr 16, 2020 at 05:24:53PM +0200, Neil Armstrong wrote:
> >> Amlogic uses a proprietary lossless image compression protocol and format
> >> for their hardware video codec accelerators, either video decoders or
> >> video input encoders.
> >>
> >> It considerably reduces memory bandwidth while writing and reading
> >> frames in memory.
> >>
> >> The underlying storage is considered to be 3 components, 8bit or 10-bit
> >> per component, YCbCr 420, single plane :
> >> - DRM_FORMAT_YUV420_8BIT
> >> - DRM_FORMAT_YUV420_10BIT
> >>
> >> This modifier will be notably added to DMA-BUF frames imported from the V4L2
> >> Amlogic VDEC decoder.
> >>
> >> This introduces the basic layout composed of:
> >> - a body content organized in 64x32 superblocks with 4096 bytes per
> >>   superblock in default mode.
> >> - a 32 bytes per 128x64 header block
> >>
> >> This layout is tranferrable between Amlogic SoCs supporting this modifier.
> >>
> >> Tested-by: Kevin Hilman <khilman at baylibre.com>
> >> Signed-off-by: Neil Armstrong <narmstrong at baylibre.com>
> >> ---
> >>  include/uapi/drm/drm_fourcc.h | 39 +++++++++++++++++++++++++++++++++++
> >>  1 file changed, 39 insertions(+)
> >>
> >> diff --git a/include/uapi/drm/drm_fourcc.h b/include/uapi/drm/drm_fourcc.h
> >> index 8bc0b31597d8..a1b163a5641f 100644
> >> --- a/include/uapi/drm/drm_fourcc.h
> >> +++ b/include/uapi/drm/drm_fourcc.h
> >> @@ -309,6 +309,7 @@ extern "C" {
> >>  #define DRM_FORMAT_MOD_VENDOR_BROADCOM 0x07
> >>  #define DRM_FORMAT_MOD_VENDOR_ARM     0x08
> >>  #define DRM_FORMAT_MOD_VENDOR_ALLWINNER 0x09
> >> +#define DRM_FORMAT_MOD_VENDOR_AMLOGIC 0x0a
> >>
> >>  /* add more to the end as needed */
> >>
> >> @@ -804,6 +805,44 @@ extern "C" {
> >>   */
> >>  #define DRM_FORMAT_MOD_ALLWINNER_TILED fourcc_mod_code(ALLWINNER, 1)
> >>
> >> +/*
> >> + * Amlogic Video Framebuffer Compression modifiers
> >> + *
> >> + * Amlogic uses a proprietary lossless image compression protocol and format
> >> + * for their hardware video codec accelerators, either video decoders or
> >> + * video input encoders.
> >> + *
> >> + * It considerably reduces memory bandwidth while writing and reading
> >> + * frames in memory.
> >> + *
> >> + * The underlying storage is considered to be 3 components, 8bit or 10-bit
> >> + * per component YCbCr 420, single plane :
> >> + * - DRM_FORMAT_YUV420_8BIT
> >> + * - DRM_FORMAT_YUV420_10BIT
> >> + *
> >> + * The first 8 bits of the mode defines the layout, then the following 8 bits
> >> + * defines the options changing the layout.
> >
> > None of the modifiers you're doing seem to have these other 8 bits
> > defined anywhere. And it's not encoded in your modifiers. Can't we just
> > enumerate the ones we have/need and done?
>
> It's introduced in patch 5

Hm must have been blind, I overlooked the << 8 shift. I'd just do a
macro which encoders all fields into the modifier, instead of
hand-rolling this.

> >
> >> + *
> >> + * Not all combinations are valid, and different SoCs may support different
> >> + * combinations of layout and options.
> >> + */
> >> +#define DRM_FORMAT_MOD_AMLOGIC_FBC(__modes) fourcc_mod_code(AMLOGIC, __modes)
> >> +
> >> +/* Amlogic FBC Layouts */
> >> +#define DRM_FORMAT_MOD_AMLOGIC_FBC_LAYOUT_MASK              (0xf << 0)
> >> +
> >> +/*
> >> + * Amlogic FBC Basic Layout
> >> + *
> >> + * The basic layout is composed of:
> >> + * - a body content organized in 64x32 superblocks with 4096 bytes per
> >> + *   superblock in default mode.
> >> + * - a 32 bytes per 128x64 header block
> >> + *
> >> + * This layout is transferrable between Amlogic SoCs supporting this modifier.
> >> + */
> >> +#define DRM_FORMAT_MOD_AMLOGIC_FBC_LAYOUT_BASIC             (1ULL << 0)
> >
> > This is kinda confusing, since this isn't actually the modifier, but the
> > mode of the modifer. Generally what we do is only define the former, with
> > maybe some macros to extract stuff.
> >
> > To make this more mistake-proof I'd only define the full modifier code.
> > Definitely don't add a #define with the DRM_FORMAT_MOD_ prefix which isn't
> > actually a full modifier code.
>
> Exact, I'll use the same scheme as AFBC: AMLOGIC_FBC_FORMAT_ ...

Yup there's a number of parametried modifiers. As long as the stuff
you get from a DRM_FORMAT_MOD_ ... macro is a full modifier with
everything it should be all fine.
-Daniel

> Neil
>
> > -Daniel
> >
> >> +
> >>  #if defined(__cplusplus)
> >>  }
> >>  #endif
> >> --
> >> 2.22.0
> >>
> >
>
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://lists.freedesktop.org/mailman/listinfo/dri-devel



-- 
Daniel Vetter
Software Engineer, Intel Corporation
+41 (0) 79 365 57 48 - http://blog.ffwll.ch