[PATCH v6 01/12] dt-bindings: add img, pvrsgx.yaml for Imagination GPUs
H. Nikolaus Schaller
hns at goldelico.com
Fri Apr 17 12:16:07 UTC 2020
Hi Rob,
> Am 16.04.2020 um 22:41 schrieb Rob Herring <robh at kernel.org>:
>
> On Wed, 15 Apr 2020 10:35:08 +0200, "H. Nikolaus Schaller" wrote:
>> The Imagination PVR/SGX GPU is part of several SoC from
>> multiple vendors, e.g. TI OMAP, Ingenic JZ4780, Intel Poulsbo,
>> Allwinner A83 and others.
>>
>> With this binding, we describe how the SGX processor is
>> interfaced to the SoC (registers, interrupt etc.).
>>
>> In most cases, Clock, Reset and power management is handled
>> by a parent node or elsewhere (e.g. code in the driver).
>>
>> Tested by make dt_binding_check dtbs_check
>>
>> Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>> ---
>> .../devicetree/bindings/gpu/img,pvrsgx.yaml | 122 ++++++++++++++++++
>> 1 file changed, 122 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml
>>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> Documentation/devicetree/bindings/gpu/img,pvrsgx.yaml: while parsing a block mapping
> in "<unicode string>", line 74, column 13
It turned out that there was a stray " in line 74 from the last editing phase.
Will be fixed in v7.
Would it be possible to make dt_binding_check not only report line/column but the
contents of the line instead of "<unicode string>"?
> did not find expected key
> in "<unicode string>", line 117, column 21
> Documentation/devicetree/bindings/Makefile:12: recipe for target 'Documentation/devicetree/bindings/gpu/img,pvrsgx.example.dts' failed
> make[1]: *** [Documentation/devicetree/bindings/gpu/img,pvrsgx.example.dts] Error 1
> make[1]: *** Waiting for unfinished jobs....
> Makefile:1264: recipe for target 'dt_binding_check' failed
> make: *** [dt_binding_check] Error 2
>
> See https://patchwork.ozlabs.org/patch/1270997
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure dt-schema is up to date:
>
> pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade
>
> Please check and re-submit.
BR and thanks,
Nikolaus Schaller
More information about the dri-devel
mailing list