[PATCH v4] dt-bindings: display: dw_mipi_dsi.txt: convert to yaml

[Angelo Ribeiro]

Hi Adrian,

From: Adrian Ratiu <adrian.ratiu at collabora.com>
Date: Thu, Apr 23, 2020 at 11:00:58

> This converts the Synopsis MIPI DSI binding documentation to yaml and
> should be quite straightforward. I've added a missing ref clk and also
> added Philippe as maintainer b/c he's the original txt author following
> the algorithm provided in Message-ID 20200420175909.GA5810 at ravnborg.org.
> 
> Cc: Philippe CORNU <philippe.cornu at st.com>
> Cc: devicetree at vger.kernel.org
> Suggested-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
> Reviewed-by: Rob Herring <robh at kernel.org>
> Signed-off-by: Adrian Ratiu <adrian.ratiu at collabora.com>
> ---
> Changes in v4:
>   - Dropped panel patternProperties (Rob)
> 
> Changes in v3:
>   - Added ports property and its children which are required (Laurent)
>   - Sorted required list alphabetically
> 
> Changes in v2:
>   - Removed unnecessary descriptions and maxItems (Rob)
>   - Changed maintainers entry / dropped Mark (Rob)
>   - Added dsi-controller.yaml ref (Rob)
> ---
>  .../bindings/display/bridge/dw_mipi_dsi.txt   | 32 ---------
>  .../display/bridge/snps,dw-mipi-dsi.yaml      | 68 +++++++++++++++++++
>  2 files changed, 68 insertions(+), 32 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
>  create mode 100644 Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt b/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> deleted file mode 100644
> index b13adf30b8d3b..0000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/dw_mipi_dsi.txt
> +++ /dev/null
> @@ -1,32 +0,0 @@
> -Synopsys DesignWare MIPI DSI host controller
> -============================================
> -
> -This document defines device tree properties for the Synopsys DesignWare MIPI
> -DSI host controller. It doesn't constitue a device tree binding specification
> -by itself but is meant to be referenced by platform-specific device tree
> -bindings.
> -
> -When referenced from platform device tree bindings the properties defined in
> -this document are defined as follows. The platform device tree bindings are
> -responsible for defining whether each optional property is used or not.
> -
> -- reg: Memory mapped base address and length of the DesignWare MIPI DSI
> -  host controller registers. (mandatory)
> -
> -- clocks: References to all the clocks specified in the clock-names property
> -  as specified in [1]. (mandatory)
> -
> -- clock-names:
> -  - "pclk" is the peripheral clock for either AHB and APB. (mandatory)
> -  - "px_clk" is the pixel clock for the DPI/RGB input. (optional)
> -
> -- resets: References to all the resets specified in the reset-names property
> -  as specified in [2]. (optional)
> -
> -- reset-names: string reset name, must be "apb" if used. (optional)
> -
> -- panel or bridge node: see [3]. (mandatory)
> -
> -[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
> -[2] Documentation/devicetree/bindings/reset/reset.txt
> -[3] Documentation/devicetree/bindings/display/mipi-dsi-bus.txt
> diff --git a/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> new file mode 100644
> index 0000000000000..012aa8e7cb8cd
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/snps,dw-mipi-dsi.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: https://urldefense.com/v3/__http://devicetree.org/schemas/display/bridge/snps,dw-mipi-dsi.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKCpP901d$ 
> +$schema: https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.yaml*__;Iw!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKPfhyNgW$ 
> +
> +title: Synopsys DesignWare MIPI DSI host controller
> +
> +maintainers:
> +  - Philippe CORNU <philippe.cornu at st.com>
> +
> +description: |
> +  This document defines device tree properties for the Synopsys DesignWare MIPI
> +  DSI host controller. It doesn't constitue a device tree binding specification
> +  by itself but is meant to be referenced by platform-specific device tree
> +  bindings.
> +
> +  When referenced from platform device tree bindings the properties defined in
> +  this document are defined as follows. The platform device tree bindings are
> +  responsible for defining whether each property is required or optional.
> +
> +allOf:
> +  - $ref: ../dsi-controller.yaml#
> +
> +properties:
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: Module clock
> +      - description: DSI bus clock for either AHB and APB
> +      - description: Pixel clock for the DPI/RGB input
> +    minItems: 2
> +
> +  clock-names:
> +    items:
> +      - const: ref
> +      - const: pclk
> +      - const: px_clk
> +    minItems: 2
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: apb
> +
> +  ports:
> +    type: object
> +
> +    properties:
> +      port at 0:
> +        type: object
> +        description: Input node to receive pixel data.
> +      port at 1:
> +        type: object
> +        description: DSI output node to panel.
> +
> +    required:
> +      - port at 0
> +      - port at 1
> +
> +required:
> +  - clock-names
> +  - clocks
> +  - ports
> +  - reg

Shouldn't the reset and reset-names be stated as required?
>From what I understand the driver will return if the reset is not 
available.

> -- 
> 2.26.0
> 
> _______________________________________________
> dri-devel mailing list
> dri-devel at lists.freedesktop.org
> https://urldefense.com/v3/__https://lists.freedesktop.org/mailman/listinfo/dri-devel__;!!A4F2R9G_pg!Pn0TP0h4QkEcILgH_xBqMjSM4dJxlyU3iCvF4FSbmdQOSIV309ngWu8EKDNeA2R5$ 

Thanks,
Angelo