[PATCH] dt-bindings: display: anx7814.txt: convert to yaml
Enric Balletbo i Serra
enric.balletbo at collabora.com
Fri Apr 24 14:08:10 UTC 2020
Hi Ricardo,
Thank you for your patch.
On 24/4/20 8:53, Ricardo Cañuelo wrote:
> This converts the Analogix ANX7814 bridge DT binding to yaml. Port
> definitions and descriptions were expanded, apart from that it's a
> direct translation from the original binding.
>
> Signed-off-by: Ricardo Cañuelo <ricardo.canuelo at collabora.com>
> ---
> Tested with:
> make dt_binding_check ARCH=arm64 DT_SCHEMA_FILES=<.../anx7814.yaml>
> make dtbs_check ARCH=arm64 DT_SCHEMA_FILES=<.../anx7814.yaml>
>
> .../bindings/display/bridge/anx7814.txt | 42 ------
> .../bindings/display/bridge/anx7814.yaml | 133 ++++++++++++++++++
> 2 files changed, 133 insertions(+), 42 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.txt
> create mode 100644 Documentation/devicetree/bindings/display/bridge/anx7814.yaml
Use the full compatible string: analogix,anx7814.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.txt b/Documentation/devicetree/bindings/display/bridge/anx7814.txt
> deleted file mode 100644
> index 17258747fff6..000000000000
> --- a/Documentation/devicetree/bindings/display/bridge/anx7814.txt
> +++ /dev/null
> @@ -1,42 +0,0 @@
> -Analogix ANX7814 SlimPort (Full-HD Transmitter)
> ------------------------------------------------
> -
> -The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> -designed for portable devices.
> -
> -Required properties:
> -
> - - compatible : Must be one of:
> - "analogix,anx7808"
> - "analogix,anx7812"
> - "analogix,anx7814"
> - "analogix,anx7818"
> - - reg : I2C address of the device
> - - interrupts : Should contain the INTP interrupt
> - - hpd-gpios : Which GPIO to use for hpd
> - - pd-gpios : Which GPIO to use for power down
> - - reset-gpios : Which GPIO to use for reset
> -
> -Optional properties:
> -
> - - dvdd10-supply : Regulator for 1.0V digital core power.
> - - Video port for HDMI input, using the DT bindings defined in [1].
> -
> -[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> -
> -Example:
> -
> - anx7814: anx7814 at 38 {
> - compatible = "analogix,anx7814";
> - reg = <0x38>;
> - interrupt-parent = <&gpio0>;
> - interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
> - hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> - pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
> - reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
> - port {
> - anx7814_in: endpoint {
> - remote-endpoint = <&hdmi0_out>;
> - };
> - };
> - };
> diff --git a/Documentation/devicetree/bindings/display/bridge/anx7814.yaml b/Documentation/devicetree/bindings/display/bridge/anx7814.yaml
> new file mode 100644
> index 000000000000..53d3c778c893
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/bridge/anx7814.yaml
> @@ -0,0 +1,133 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/bridge/anx7814.yaml#
Don't forget to update this too.
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Analogix ANX7814 SlimPort (Full-HD Transmitter)
> +
> +maintainers:
> + - Enric Balletbo i Serra <enric.balletbo at collabora.com>
> +
> +description: |
> + The ANX7814 is an ultra-low power Full-HD (1080p60) SlimPort transmitter
> + designed for portable devices.
> +
> +properties:
> + compatible:
> + enum:
> + - analogix,anx7808
> + - analogix,anx7812
> + - analogix,anx7814
> + - analogix,anx7818
> +
> + reg:
> + maxItems: 1
> + description: I2C address of the device.
> +
Can drop the description as there's nothing specific to this device.
> + interrupts:
> + maxItems: 1
> + description: Should contain the INTP interrupt.
> +
> + hpd-gpios:
> + maxItems: 1
> + description: Which GPIO to use for hpd.
> +
> + pd-gpios:
> + maxItems: 1
> + description: Which GPIO to use for power down.
> +
> + reset-gpios:
> + maxItems: 1
> + description: Which GPIO to use for reset.
> +
> + dvdd10-supply:
> + maxItems: 1
> + description: Regulator for 1.0V digital core power.
> +
> + ports:
> + type: object
> + description:
> + A node containing input and output port nodes with endpoint
> + definitions as documented in
> + Documentation/devicetree/bindings/media/video-interfaces.txt
> + Documentation/devicetree/bindings/graph.txt
> +
> + properties:
> + "#address-cells":
> + const: 1
> +
I don't' think you need to specify this. You can drop it (better double check
with Rob, though)
> + "#size-cells":
> + const: 0
> +
I don't' think you need to specify this. You can drop it (better double check
with Rob, though)
> + port at 0:
> + type: object
> + description: Video port for HDMI input.
> +
> + properties:
> + reg:
> + const: 0
> +
> + port at 1:
> + type: object
> + description:
> + Video port for SlimPort, DisplayPort, eDP or MyDP output.
> +
> + properties:
> + reg:
> + const: 1
> +
> + required:
> + - port at 0
> + - port at 1
> +
> +required:
> + - compatible
> + - reg
> + - interrupts
> + - hpd-gpios
> + - pd-gpios
> + - reset-gpios
> + - ports
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> + #include <dt-bindings/gpio/gpio.h>
> +
> + i2c0 {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + anx7814: anx7814 at 38 {
This should be "bridge at 38 {", since node names are supposed to
match the class of the device instead of the name of the device. I guess.
> + compatible = "analogix,anx7814";
> + reg = <0x38>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <99 IRQ_TYPE_LEVEL_LOW>; /* INTP */
> + hpd-gpios = <&pio 36 GPIO_ACTIVE_HIGH>;
> + pd-gpios = <&pio 33 GPIO_ACTIVE_HIGH>;
> + reset-gpios = <&pio 98 GPIO_ACTIVE_HIGH>;
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port at 0 {
> + reg = <0>;
> + anx7814_in: endpoint {
> + remote-endpoint = <&hdmi0_out>;
> + };
> + };
> +
> + port at 1 {
> + reg = <1>;
> + anx7814_out: endpoint {
> + remote-endpoint = <&edp_out>;
> + };
> + };
> + };
> + };
> + };
> +...
>
More information about the dri-devel
mailing list