[PATCH v2 00/91] drm/vc4: Support BCM2711 Display Pipeline
Maxime Ripard
maxime at cerno.tech
Fri Apr 24 15:33:41 UTC 2020
Hi everyone,
Here's a (pretty long) series to introduce support in the VC4 DRM driver
for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
The main differences are that there's two HDMI controllers and that there's
more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
have only 3 FIFOs. Both of those differences are breaking a bunch of
expectations in the driver, so we first need a good bunch of cleanup and
reworks to introduce support for the new controllers.
Similarly, the HDMI controller has all its registers shuffled and split in
multiple controllers now, so we need a bunch of changes to support this as
well.
Only the HDMI support is enabled for now (even though the DPI output has
been tested too). There's a couple of rough edges still that should be
addressed in the next versions:
- After a modeset, it's likely that the pixels will be shifted by one.
- Dual output doesn't work
- The transposer (and thus writeback) doesn't work either and conflicts
with the output mux too.
Let me know if you have any comments
Maxime
Cc: bcm-kernel-feedback-list at broadcom.com
Cc: devicetree at vger.kernel.org
Cc: Kamal Dasu <kdasu.kdev at gmail.com>
Cc: linux-clk at vger.kernel.org
Cc: linux-i2c at vger.kernel.org
Cc: Michael Turquette <mturquette at baylibre.com>
Cc: Philipp Zabel <p.zabel at pengutronix.de>
Cc: Rob Herring <robh+dt at kernel.org>
Cc: Stephen Boyd <sboyd at kernel.org>
Cc: Wolfram Sang <wsa at the-dreams.de>
Changes from v1:
- Rebased on top of 5.7-rc1
- Run checkpatch
- Added audio support
- Fixed some HDMI timeouts
- Swiched to clk_hw_register_gate_parent_data
- Reorder Kconfig symbols in drivers/i2c/busses
- Make the firmware clocks a child of the firmware node
- Switch DVP clock driver to clk_hw interface
- constify raspberrypi_clk_data in raspberrypi_clock_property
- Don't mark firmware clocks as IGNORE_UNUSED
- Change from reset_ms to reset_us in reset-simple, and add a bit more
comments
- Remove generic clk patch to test if a NULL pointer is returned
- Removed misleading message in the is_prepared renaming patch commit
message
- Constify HDMI controller variants
- Fix a bug in the allocation size of the clk data array
- Added a mention in the DT binding conversion patches about the breakage
- Merged a few fixes from kbuild
- Fixed a few bisection and CEC build issues
- Collected Acked-by and Reviewed-by
- Change Dave email address to raspberrypi.com
Dave Stevenson (6):
drm/vc4: Add support for the BCM2711 HVS5
drm/vc4: plane: Improve LBM usage
drm/vc4: hdmi: Use reg-names to retrieve the HDMI audio registers
drm/vc4: hdmi: Reset audio infoframe on encoder_enable if previously streaming
drm/vc4: hdmi: Set the b-frame marker to the match ALSA's default.
drm/vc4: hdmi: Add audio-related callbacks
Florian Fainelli (1):
dt-bindings: arm: bcm: Convert BCM2835 firmware binding to YAML
Maxime Ripard (84):
i2c: brcmstb: Allow to compile it on BCM2835
dt-bindings: clock: Add a binding for the RPi Firmware clocks
firmware: rpi: Only create clocks device if we don't have a node for it
clk: bcm: rpi: Allow the driver to be probed by DT
clk: bcm: rpi: Statically init clk_init_data
clk: bcm: rpi: Use clk_hw_register for pllb_arm
clk: bcm: rpi: Remove global pllb_arm clock pointer
clk: bcm: rpi: Make sure pllb_arm is removed
clk: bcm: rpi: Remove pllb_arm_lookup global pointer
clk: bcm: rpi: Switch to clk_hw_register_clkdev
clk: bcm: rpi: Make sure the clkdev lookup is removed
clk: bcm: rpi: Create a data structure for the clocks
clk: bcm: rpi: Add clock id to data
clk: bcm: rpi: Pass the clocks data to the firmware function
clk: bcm: rpi: Rename is_prepared function
clk: bcm: rpi: Split pllb clock hooks
clk: bcm: rpi: Make the PLLB registration function return a clk_hw
clk: bcm: rpi: Add DT provider for the clocks
clk: bcm: rpi: Discover the firmware clocks
ARM: dts: bcm2711: Add firmware clocks node
reset: Move reset-simple header out of drivers/reset
reset: simple: Add reset callback
dt-bindings: clock: Add BCM2711 DVP binding
clk: bcm: Add BCM2711 DVP driver
ARM: dts: bcm2711: Add HDMI DVP
dt-bindings: display: Convert VC4 bindings to schemas
dt-bindings: display: vc4: dpi: Add missing clock-names property
dt-bindings: display: vc4: dsi: Add missing clock properties
dt-bindings: display: vc4: hdmi: Add missing clock-names property
dt-bindings: display: vc4: Document BCM2711 VC5
drm/vc4: drv: Add include guards
drm/vc4: drv: Support BCM2711
dt-bindings: display: Add support for the BCM2711 HVS
drm/vc4: hvs: Boost the core clock during modeset
drm/vc4: plane: Move planes creation to its own function
drm/vc4: plane: Move additional planes creation to driver
drm/vc4: plane: Register all the planes at once
drm/vc4: plane: Create overlays for any CRTC
drm/vc4: plane: Create more planes
drm/vc4: crtc: Rename SoC data structures
drm/vc4: crtc: Move crtc state to common header
drm/vc4: crtc: Deal with different number of pixel per clock
drm/vc4: crtc: Use a shared interrupt
drm/vc4: crtc: Turn static const variable into a define
drm/vc4: crtc: Move the cob allocation outside of bind
drm/vc4: crtc: Rename HVS channel to output
drm/vc4: crtc: Use local chan variable
drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
drm/vc4: crtc: Assign output to channel automatically
drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
drm/vc4: crtc: Add function to compute FIFO level bits
drm/vc4: crtc: Rename HDMI encoder type to HDMI0
drm/vc4: crtc: Add HDMI1 encoder type
drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt
drm/vc4: crtc: Disable color management for HVS5
dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
drm/vc4: crtc: Add BCM2711 pixelvalves
drm/vc4: hdmi: Use debugfs private field
drm/vc4: hdmi: Move structure to header
drm/vc4: hdmi: rework connectors and encoders
drm/vc4: hdmi: Remove DDC argument to connector_init
drm/vc4: hdmi: Rename hdmi to vc4_hdmi
drm/vc4: hdmi: Move accessors to vc4_hdmi
drm/vc4: hdmi: Use local vc4_hdmi directly
drm/vc4: hdmi: Add container_of macros for encoders and connectors
drm/vc4: hdmi: Pass vc4_hdmi to CEC code
drm/vc4: hdmi: Remove vc4_dev hdmi pointer
drm/vc4: hdmi: Remove vc4_hdmi_connector
drm/vc4: hdmi: Introduce resource init and variant
drm/vc4: hdmi: Implement a register layout abstraction
drm/vc4: hdmi: Add reset callback
drm/vc4: hdmi: Add PHY init and disable function
drm/vc4: hdmi: Add PHY RNG enable / disable function
drm/vc4: hdmi: Add a CSC setup callback
drm/vc4: hdmi: Store the encoder type in the variant structure
drm/vc4: hdmi: Deal with multiple debugfs files
drm/vc4: hdmi: Move CEC init to its own function
drm/vc4: hdmi: Add CEC support flag
drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
drm/vc4: hdmi: Support the BCM2711 HDMI controllers
dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
ARM: dts: bcm2711: Enable the display pipeline
Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt | 14 +-
Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml | 59 +++-
Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml | 47 ++-
Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +--------
Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml | 109 +++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 72 +++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 84 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 80 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 53 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 45 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 35 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++-
MAINTAINERS | 2 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 51 ++-
arch/arm/boot/dts/bcm2711.dtsi | 130 +++++-
drivers/clk/bcm/Kconfig | 1 +-
drivers/clk/bcm/Makefile | 1 +-
drivers/clk/bcm/clk-bcm2711-dvp.c | 127 ++++++-
drivers/clk/bcm/clk-raspberrypi.c | 280 +++++++++----
drivers/firmware/raspberrypi.c | 17 +-
drivers/gpu/drm/vc4/Makefile | 1 +-
drivers/gpu/drm/vc4/vc4_crtc.c | 328 +++++++++------
drivers/gpu/drm/vc4/vc4_drv.c | 5 +-
drivers/gpu/drm/vc4/vc4_drv.h | 58 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 1536 ++++++++++++++++++++++++++++++++++++++++++------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 179 ++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 508 ++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 451 +++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hvs.c | 25 +-
drivers/gpu/drm/vc4/vc4_kms.c | 181 +++++++-
drivers/gpu/drm/vc4/vc4_plane.c | 271 +++++++++----
drivers/gpu/drm/vc4/vc4_regs.h | 173 +++-----
drivers/i2c/busses/Kconfig | 4 +-
drivers/reset/reset-simple.c | 27 +-
drivers/reset/reset-simple.h | 41 +--
drivers/reset/reset-socfpga.c | 3 +-
drivers/reset/reset-sunxi.c | 3 +-
drivers/reset/reset-uniphier-glue.c | 3 +-
include/linux/reset/reset-simple.h | 47 ++-
include/soc/bcm2835/raspberrypi-firmware.h | 5 +-
42 files changed, 4109 insertions(+), 1244 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.txt
create mode 100644 Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2711-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h
delete mode 100644 drivers/reset/reset-simple.h
create mode 100644 include/linux/reset/reset-simple.h
base-commit: cb3692197b5da2fb898335eec1640db14d92e52e
--
git-series 0.9.1
More information about the dri-devel
mailing list