[PATCH v2 26/91] ARM: dts: bcm2711: Add HDMI DVP

[Maxime Ripard]

Now that we have a driver for the DVP, let's add its DT node.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 arch/arm/boot/dts/bcm2711.dtsi | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index a91cf68e3c4c..00bcaed1be32 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,6 +12,13 @@
 
 	interrupt-parent = <&gicv2>;
 
+	clk_108MHz: clk-108M {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <108000000>;
+		clock-output-names = "108MHz-clock";
+	};
+
 	soc {
 		/*
 		 * Defined ranges:
@@ -244,6 +251,14 @@
 		hvs at 7e400000 {
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
+
+		dvp: clock at 7ef00000 {
+			compatible = "brcm,brcm2711-dvp";
+			reg = <0x7ef00000 0x10>;
+			clocks = <&clk_108MHz>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
 	};
 
 	/*
-- 
git-series 0.9.1