[PATCH v2 91/91] ARM: dts: bcm2711: Enable the display pipeline

[Maxime Ripard]

Now that all the drivers have been adjusted for it, let's bring in the
necessary device tree changes.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 arch/arm/boot/dts/bcm2711-rpi-4-b.dts |  46 +++++++++++-
 arch/arm/boot/dts/bcm2711.dtsi        | 115 ++++++++++++++++++++++++++-
 2 files changed, 160 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
index 3205d2dfa898..0efbc4412dc9 100644
--- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
+++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
@@ -220,3 +220,49 @@
 &vchiq {
 	interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+&vc4 {
+	status = "okay";
+};
+
+&pixelvalve0 {
+	status = "okay";
+};
+
+&pixelvalve1 {
+	status = "okay";
+};
+
+&pixelvalve2 {
+	status = "okay";
+};
+
+&pixelvalve3 {
+	status = "okay";
+};
+
+&pixelvalve4 {
+	status = "okay";
+};
+
+&hdmi0 {
+	clocks = <&firmware_clocks 13>, <&dvp 0>;
+	status = "okay";
+};
+
+&ddc0 {
+	status = "okay";
+};
+
+&hdmi1 {
+	clocks = <&firmware_clocks 13>, <&dvp 1>;
+	status = "okay";
+};
+
+&ddc1 {
+	status = "okay";
+};
+
+&hvs {
+	clocks = <&firmware_clocks 4>;
+};
diff --git a/arch/arm/boot/dts/bcm2711.dtsi b/arch/arm/boot/dts/bcm2711.dtsi
index 00bcaed1be32..a6549fa6e62b 100644
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -12,6 +12,11 @@
 
 	interrupt-parent = <&gicv2>;
 
+	vc4: gpu {
+		compatible = "brcm,bcm2711-vc5";
+		status = "disabled";
+	};
+
 	clk_108MHz: clk-108M {
 		#clock-cells = <0>;
 		compatible = "fixed-clock";
@@ -238,6 +243,27 @@
 			status = "disabled";
 		};
 
+		pixelvalve0: pixelvalve at 7e206000 {
+			compatible = "brcm,bcm2711-pixelvalve0";
+			reg = <0x7e206000 0x100>;
+			interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve1: pixelvalve at 7e207000 {
+			compatible = "brcm,bcm2711-pixelvalve1";
+			reg = <0x7e207000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		pixelvalve2: pixelvalve at 7e20a000 {
+			compatible = "brcm,bcm2711-pixelvalve2";
+			reg = <0x7e20a000 0x100>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		pwm1: pwm at 7e20c800 {
 			compatible = "brcm,bcm2835-pwm";
 			reg = <0x7e20c800 0x28>;
@@ -248,10 +274,25 @@
 			status = "disabled";
 		};
 
-		hvs at 7e400000 {
+		pixelvalve4: pixelvalve at 7e216000 {
+			compatible = "brcm,bcm2711-pixelvalve4";
+			reg = <0x7e216000 0x100>;
+			interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		hvs: hvs at 7e400000 {
+			compatible = "brcm,bcm2711-hvs";
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		pixelvalve3: pixelvalve at 7ec12000 {
+			compatible = "brcm,bcm2711-pixelvalve3";
+			reg = <0x7ec12000 0x100>;
+			interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dvp: clock at 7ef00000 {
 			compatible = "brcm,brcm2711-dvp";
 			reg = <0x7ef00000 0x10>;
@@ -259,6 +300,78 @@
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		hdmi0: hdmi at 7ef00700 {
+			compatible = "brcm,bcm2711-hdmi0";
+			reg = <0x7ef00700 0x300>,
+			      <0x7ef00300 0x200>,
+			      <0x7ef00f00 0x80>,
+			      <0x7ef00f80 0x80>,
+			      <0x7ef01b00 0x200>,
+			      <0x7ef01f00 0x400>,
+			      <0x7ef00200 0x80>,
+			      <0x7ef04300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			clock-names = "hdmi", "clk-108M";
+			resets = <&dvp 0>;
+			ddc = <&ddc0>;
+			dmas = <&dma 10>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc0: i2c at 7ef04500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef04500 0x100>, <0x7ef00b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <390000>;
+			status = "disabled";
+		};
+
+		hdmi1: hdmi at 7ef05700 {
+			compatible = "brcm,bcm2711-hdmi1";
+			reg = <0x7ef05700 0x300>,
+			      <0x7ef05300 0x200>,
+			      <0x7ef05f00 0x80>,
+			      <0x7ef05f80 0x80>,
+			      <0x7ef06b00 0x200>,
+			      <0x7ef06f00 0x400>,
+			      <0x7ef00280 0x80>,
+			      <0x7ef09300 0x100>,
+			      <0x7ef20000 0x100>;
+			reg-names = "hdmi",
+				    "dvp",
+				    "phy",
+				    "rm",
+				    "packet",
+				    "metadata",
+				    "csc",
+				    "cec",
+				    "hd";
+			ddc = <&ddc1>;
+			clock-names = "hdmi", "clk-108M";
+			resets = <&dvp 1>;
+			dmas = <&dma 17>;
+			dma-names = "audio-rx";
+			status = "disabled";
+		};
+
+		ddc1: i2c at 7ef09500 {
+			compatible = "brcm,bcm2711-hdmi-i2c";
+			reg = <0x7ef09500 0x100>, <0x7ef05b00 0x300>;
+			reg-names = "bsc", "auto-i2c";
+			clock-frequency = <390000>;
+			status = "disabled";
+		};
 	};
 
 	/*
-- 
git-series 0.9.1