[PATCH v2 18/21] drm/bridge: nxp-ptn3460: add drm_panel_bridge support
Sam Ravnborg
sam at ravnborg.org
Mon Apr 27 08:18:47 UTC 2020
Prepare the bridge driver for use in a chained setup by
replacing direct use of drm_panel with drm_panel_bridge support.
Note: the bridge panel will use the connector type from the panel.
Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Andrzej Hajda <a.hajda at samsung.com>
Cc: Neil Armstrong <narmstrong at baylibre.com>
Cc: Laurent Pinchart <Laurent.pinchart at ideasonboard.com>
Cc: Jonas Karlman <jonas at kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec at siol.net>
---
drivers/gpu/drm/bridge/nxp-ptn3460.c | 51 ++++++++--------------------
1 file changed, 14 insertions(+), 37 deletions(-)
diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c
index 438e566ce0a4..0bd9f0e451b3 100644
--- a/drivers/gpu/drm/bridge/nxp-ptn3460.c
+++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c
@@ -30,7 +30,7 @@ struct ptn3460_bridge {
struct i2c_client *client;
struct drm_bridge bridge;
struct edid *edid;
- struct drm_panel *panel;
+ struct drm_bridge *panel_bridge;
struct gpio_desc *gpio_pd_n;
struct gpio_desc *gpio_rst_n;
u32 edid_emulation;
@@ -127,11 +127,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
usleep_range(10, 20);
gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
- if (drm_panel_prepare(ptn_bridge->panel)) {
- DRM_ERROR("failed to prepare panel\n");
- return;
- }
-
/*
* There's a bug in the PTN chip where it falsely asserts hotplug before
* it is fully functional. We're forced to wait for the maximum start up
@@ -146,16 +141,6 @@ static void ptn3460_pre_enable(struct drm_bridge *bridge)
ptn_bridge->enabled = true;
}
-static void ptn3460_enable(struct drm_bridge *bridge)
-{
- struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
- if (drm_panel_enable(ptn_bridge->panel)) {
- DRM_ERROR("failed to enable panel\n");
- return;
- }
-}
-
static void ptn3460_disable(struct drm_bridge *bridge)
{
struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
@@ -165,25 +150,10 @@ static void ptn3460_disable(struct drm_bridge *bridge)
ptn_bridge->enabled = false;
- if (drm_panel_disable(ptn_bridge->panel)) {
- DRM_ERROR("failed to disable panel\n");
- return;
- }
-
gpiod_set_value(ptn_bridge->gpio_rst_n, 1);
gpiod_set_value(ptn_bridge->gpio_pd_n, 0);
}
-static void ptn3460_post_disable(struct drm_bridge *bridge)
-{
- struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
-
- if (drm_panel_unprepare(ptn_bridge->panel)) {
- DRM_ERROR("failed to unprepare panel\n");
- return;
- }
-}
-
static int ptn3460_get_modes(struct drm_connector *connector)
{
struct ptn3460_bridge *ptn_bridge;
@@ -242,6 +212,11 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge);
int ret;
+ ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge,
+ bridge, flags);
+ if (ret < 0)
+ return ret;
+
if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) {
DRM_ERROR("Fix bridge driver to make connector optional!");
return -EINVAL;
@@ -265,9 +240,6 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
drm_connector_attach_encoder(&ptn_bridge->connector,
bridge->encoder);
- if (ptn_bridge->panel)
- drm_panel_attach(ptn_bridge->panel, &ptn_bridge->connector);
-
drm_helper_hpd_irq_event(ptn_bridge->connector.dev);
return ret;
@@ -275,9 +247,7 @@ static int ptn3460_bridge_attach(struct drm_bridge *bridge,
static const struct drm_bridge_funcs ptn3460_bridge_funcs = {
.pre_enable = ptn3460_pre_enable,
- .enable = ptn3460_enable,
.disable = ptn3460_disable,
- .post_disable = ptn3460_post_disable,
.attach = ptn3460_bridge_attach,
};
@@ -286,6 +256,8 @@ static int ptn3460_probe(struct i2c_client *client,
{
struct device *dev = &client->dev;
struct ptn3460_bridge *ptn_bridge;
+ struct drm_bridge *pbridge;
+ struct drm_panel *panel;
int ret;
ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL);
@@ -293,10 +265,15 @@ static int ptn3460_probe(struct i2c_client *client,
return -ENOMEM;
}
- ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &ptn_bridge->panel, NULL);
+ ret = drm_of_find_panel_or_bridge(dev->of_node, 0, 0, &panel, NULL);
if (ret)
return ret;
+ pbridge = devm_drm_panel_bridge_add(dev, panel);
+ if (IS_ERR(pbridge))
+ return PTR_ERR(pbridge);
+
+ ptn_bridge->panel_bridge = pbridge;
ptn_bridge->client = client;
ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown",
--
2.20.1
More information about the dri-devel
mailing list