[PATCH v3 1/4] dt-bindings: display: Add IPK DSI subsystem bindings

[Rob Herring]

On Mon, 27 Apr 2020 16:00:33 +0200, Angelo Ribeiro wrote:
> Add dt-bindings for Synopsys DesignWare MIPI DSI Host and VPG (Video
> Pattern Generator) support in the IPK display subsystem.
> 
> The Synopsys DesignWare IPK display video pipeline is composed by a DSI
> controller (snps,dw-ipk-dsi) and a VPG (snps,dw-ipk-vpg) as DPI
> stimulus. Typically is used the Raspberry Pi
> (raspberrypi,7inch-touchscreen-panel) as DSI panel that requires a
> I2C controller (snps,designware-i2c).
> 
> Reported-by: Rob Herring <robh+dt at kernel.org>
> Cc: David Airlie <airlied at linux.ie>
> Cc: Daniel Vetter <daniel at ffwll.ch>
> Cc: Sam Ravnborg <sam at ravnborg.org>
> Cc: Rob Herring <robh+dt at kernel.org>
> Cc: Mark Rutland <mark.rutland at arm.com>
> Cc: Gustavo Pimentel <gustavo.pimentel at synopsys.com>
> Cc: Joao Pinto <jpinto at synopsys.com>
> Signed-off-by: Angelo Ribeiro <angelo.ribeiro at synopsys.com>
> ---
> Changes since v3:
>   - Fixed dt-binding breaking on `make dt_binding_check`.
> 
> Changes since v2:
>   - Fixed dt-bindings issues, see
>     https://patchwork.ozlabs.org/patch/1260819/.
> ---
>  .../bindings/display/snps,dw-ipk-dsi.yaml          | 159 +++++++++++++++++++++
>  .../bindings/display/snps,dw-ipk-vpg.yaml          |  73 ++++++++++
>  2 files changed, 232 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-dsi.yaml
>  create mode 100644 Documentation/devicetree/bindings/display/snps,dw-ipk-vpg.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/display/snps,dw-ipk-dsi.example.dt.yaml: dw-ipk-dsi at 2000: compatible: ['snps,dw-ipk-dsi'] is too short

See https://patchwork.ozlabs.org/patch/1277673

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure dt-schema is up to date:

pip3 install git+https://github.com/devicetree-org/dt-schema.git@master --upgrade

Please check and re-submit.