[PATCH 02/10] drm: Add backlight helper
Hans de Goede
hdegoede at redhat.com
Wed Apr 29 14:13:27 UTC 2020
Hi Noralf,
On 4/29/20 2:48 PM, Noralf Trønnes wrote:
> This adds a function that creates a backlight device for a connector.
> It does not deal with the KMS backlight ABI proposition[1] to add a
> connector property. It only takes the current best practise to standardise
> the creation of a backlight device for DRM drivers while we wait for the
> property.
>
> The brightness value is set using a connector state variable and an atomic
> commit.
>
> I have looked through some of the backlight users and this is what I've found:
>
> GNOME [2]
> ---------
>
> Brightness range: 0-100
> Scale: Assumes perceptual
I'm afraid that this is an incaccurate view of how GNOME handles the
brightness. gnome-settings-daemon (g-s-d) exports a DBUS property which has
a range of 0 - 100%. But it also offers step-up and step-down DBUS methods
which are used for handling brightness hotkey presses.
This is important because g-s-d internally also keeps a step_size variable
which depends on the brightness_max value of the sysfs backlight interface,
like this:
BRIGHTNESS_STEP_AMOUNT(max) ((max) < 20 ? 1 : (max) / 20)
This is important because some older laptops where we depend on the
vendor specific ACPI method (from e.g. dell-laptop or thinkpad_acpi)
there are only 8 levels. So if g-s-d where to simply fake a 1-100
range and would leave the stepping up to the DBus API user and that
user would want 20 steps, so 5 % per step, then the user would get
Start -> 100% -> level 8
Press down -> 95% -> level 7
Press down -> 90% -> level 7 *no change*
etc.
Somewhat related on some embedded ARM devices there are tricks where
when the entire scene being rendered does not use 100% white as color,
the entire scene has all its rgb values upscaled (too a curve) so that
the brightest colors do hit 100% of one of r/g/b, combined with dimming
the backlight a bit to save power. As you can imagine for tricks like
these you want as much backlight control precision as possible.
So any backlight infra we add must expose the true range of the
backlight control and not normalize it to a 0-100 range.
So sorry, but nack for the current version because of the hardcoding
of the range.
Also the scale really should be specified by the driver, or be hardcoded
to BACKLIGHT_SCALE_UNKNOWN for now. In many cases we do not really know.
But for e.g. the acpi_video firmware backlight interface a good guess is
that it actually represents a perceptual scale rather then controlling
the wattage.
Where as the native i915 backlight interface really is controlling
the wattage without any perceptual correction.
Another problem with your proposal is that it seems to assume that
the backlight is controlled by the drm/kms driver. On x86 we have
atleast 3 different drivers for the backlight:
1) The i915 (or amd/nouveau) native driver which more or less
directly pokes the PWM controller of the GPU.
2) The ACPI video standard backlight interface
3) Vendor specific ACPI interfaces from older laptops
ATM we always register 1. which could remain unchanged with
your code and then also register 2/3 if we (the kernel) think
that will work better (*) and then rely on userspace prefering
these (they have a different backlight_type) over 1.
Ideally any infra we add will also offer the option to tie
2. or 3. to the connector...
Regards,
Hans
*) e.g. it will work while the others will not work at all
>
> Avoids setting the sysfs brightness value to zero if max_brightness >= 99.
> Can connect connector and backlight using the sysfs device.
>
> KDE [3]
> -------
>
> Brightness range: 0-100
> Scale: Assumes perceptual
>
> Weston [4]
> ----------
>
> Brightness range: 0-255
> Scale: Assumes perceptual
>
> Chromium OS [5]
> ---------------
>
> Brightness range: 0-100
> Scale: Depends on the sysfs file 'scale' which is a recent addition (2019)
>
> xserver [6]
> -----------
>
> Brightness range: 0-x (driver specific) (1 is minimum, 0 is OFF)
> Scale: Assumes perceptual
>
> The builtin modesetting driver[7] does not support Backlight, Intel[8] does.
>
> [1] https://lore.kernel.org/dri-devel/4b17ba08-39f3-57dd-5aad-d37d844b02c6@linux.intel.com/
> [2] https://gitlab.gnome.org/GNOME/gnome-settings-daemon/-/blob/master/plugins/power/gsd-backlight.c
> [3] https://github.com/KDE/powerdevil/blob/master/daemon/backends/upower/backlighthelper.cpp
> [4] https://gitlab.freedesktop.org/wayland/weston/-/blob/master/libweston/backend-drm/drm.c
> [5] https://chromium.googlesource.com/chromiumos/platform2/+/refs/heads/master/power_manager/powerd/system/internal_backlight.cc
> [6] https://github.com/freedesktop/xorg-randrproto/blob/master/randrproto.txt
> [7] https://gitlab.freedesktop.org/xorg/xserver/-/blob/master/hw/xfree86/drivers/modesetting/drmmode_display.c
> [8] https://gitlab.freedesktop.org/xorg/driver/xf86-video-intel/-/blob/master/src/backlight.c
>
> Cc: Hans de Goede <hdegoede at redhat.com>
> Cc: Jani Nikula <jani.nikula at linux.intel.com>
> Cc: Martin Peres <martin.peres at linux.intel.com>
> Cc: Daniel Thompson <daniel.thompson at linaro.org>
> Signed-off-by: Noralf Trønnes <noralf at tronnes.org>
> ---
> Documentation/gpu/drm-kms-helpers.rst | 6 +
> drivers/gpu/drm/Kconfig | 7 ++
> drivers/gpu/drm/Makefile | 1 +
> drivers/gpu/drm/drm_backlight_helper.c | 154 +++++++++++++++++++++++++
> include/drm/drm_backlight_helper.h | 9 ++
> include/drm/drm_connector.h | 10 ++
> 6 files changed, 187 insertions(+)
> create mode 100644 drivers/gpu/drm/drm_backlight_helper.c
> create mode 100644 include/drm/drm_backlight_helper.h
>
> diff --git a/Documentation/gpu/drm-kms-helpers.rst b/Documentation/gpu/drm-kms-helpers.rst
> index 9668a7fe2408..29a2f4b49fd2 100644
> --- a/Documentation/gpu/drm-kms-helpers.rst
> +++ b/Documentation/gpu/drm-kms-helpers.rst
> @@ -411,3 +411,9 @@ SHMEM GEM Helper Reference
>
> .. kernel-doc:: drivers/gpu/drm/drm_gem_shmem_helper.c
> :export:
> +
> +Backlight Helper Reference
> +==========================
> +
> +.. kernel-doc:: drivers/gpu/drm/drm_backlight_helper.c
> + :export:
> diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
> index d0aa6cff2e02..f6e13e18c9ca 100644
> --- a/drivers/gpu/drm/Kconfig
> +++ b/drivers/gpu/drm/Kconfig
> @@ -224,6 +224,13 @@ config DRM_GEM_SHMEM_HELPER
> help
> Choose this if you need the GEM shmem helper functions
>
> +config DRM_BACKLIGHT_HELPER
> + bool
> + depends on DRM
> + select BACKLIGHT_CLASS_DEVICE
> + help
> + Choose this if you need the backlight device helper functions
> +
> config DRM_VM
> bool
> depends on DRM && MMU
> diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile
> index 6493088a0fdd..0d17662dde0a 100644
> --- a/drivers/gpu/drm/Makefile
> +++ b/drivers/gpu/drm/Makefile
> @@ -52,6 +52,7 @@ drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o
> drm_kms_helper-$(CONFIG_DRM_KMS_CMA_HELPER) += drm_fb_cma_helper.o
> drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
> drm_kms_helper-$(CONFIG_DRM_DP_CEC) += drm_dp_cec.o
> +drm_kms_helper-$(CONFIG_DRM_BACKLIGHT_HELPER) += drm_backlight_helper.o
>
> obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
> obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/
> diff --git a/drivers/gpu/drm/drm_backlight_helper.c b/drivers/gpu/drm/drm_backlight_helper.c
> new file mode 100644
> index 000000000000..06e6a75d1d0a
> --- /dev/null
> +++ b/drivers/gpu/drm/drm_backlight_helper.c
> @@ -0,0 +1,154 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright 2020 Noralf Trønnes
> + */
> +
> +#include <linux/backlight.h>
> +
> +#include <drm/drm_atomic.h>
> +#include <drm/drm_connector.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_file.h>
> +
> +static int drm_backlight_update_status(struct backlight_device *bd)
> +{
> + struct drm_connector *connector = bl_get_data(bd);
> + struct drm_connector_state *connector_state;
> + struct drm_device *dev = connector->dev;
> + struct drm_modeset_acquire_ctx ctx;
> + struct drm_atomic_state *state;
> + int ret;
> +
> + state = drm_atomic_state_alloc(dev);
> + if (!state)
> + return -ENOMEM;
> +
> + drm_modeset_acquire_init(&ctx, 0);
> + state->acquire_ctx = &ctx;
> +retry:
> + connector_state = drm_atomic_get_connector_state(state, connector);
> + if (IS_ERR(connector_state)) {
> + ret = PTR_ERR(connector_state);
> + goto out;
> + }
> +
> + connector_state->backlight_brightness = bd->props.brightness;
> +
> + ret = drm_atomic_commit(state);
> +out:
> + if (ret == -EDEADLK) {
> + drm_atomic_state_clear(state);
> + drm_modeset_backoff(&ctx);
> + goto retry;
> + }
> +
> + drm_atomic_state_put(state);
> +
> + drm_modeset_drop_locks(&ctx);
> + drm_modeset_acquire_fini(&ctx);
> +
> + return ret;
> +}
> +
> +static int drm_backlight_get_brightness(struct backlight_device *bd)
> +{
> + struct drm_connector *connector = bl_get_data(bd);
> + struct drm_device *dev = connector->dev;
> + int brightness;
> +
> + drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
> + brightness = connector->state->backlight_brightness;
> + drm_modeset_unlock(&dev->mode_config.connection_mutex);
> +
> + return brightness;
> +}
> +
> +static const struct backlight_ops drm_backlight_ops = {
> + .get_brightness = drm_backlight_get_brightness,
> + .update_status = drm_backlight_update_status,
> +};
> +
> +/* Can be exported for drivers carrying a legacy name */
> +static int drm_backlight_register_with_name(struct drm_connector *connector, const char *name)
> +{
> + struct backlight_device *bd;
> + const struct backlight_properties props = {
> + .type = BACKLIGHT_RAW,
> + .scale = BACKLIGHT_SCALE_NON_LINEAR,
> + .max_brightness = 100,
> + };
> +
> + if (WARN_ON(!drm_core_check_feature(connector->dev, DRIVER_MODESET) ||
> + !drm_drv_uses_atomic_modeset(connector->dev) ||
> + !connector->kdev))
> + return -EINVAL;
> +
> + bd = backlight_device_register(name, connector->kdev, connector,
> + &drm_backlight_ops, &props);
> + if (IS_ERR(bd))
> + return PTR_ERR(bd);
> +
> + connector->backlight = bd;
> +
> + return 0;
> +}
> +
> +/**
> + * drm_backlight_register() - Register a backlight device for a connector
> + * @connector: Connector
> + *
> + * This function registers a backlight device for @connector with the following
> + * characteristics:
> + *
> + * - The connector sysfs device is used as a parent device for the backlight device.
> + * Userspace can use this to connect backlight device and connector.
> + * - Name will be on the form: **card0-HDMI-A-1-backlight**
> + * - Type is "raw"
> + * - Scale is "non-linear" (perceptual)
> + * - Max brightness is 100 giving a range of 0-100 inclusive
> + * - Reading sysfs **brightness** returns the backlight device property
> + * - Reading sysfs **actual_brightness** returns the connector state value
> + * - Writing sysfs **bl_power** is ignored, the DPMS connector property should
> + * be used to control power.
> + * - Backlight device suspend/resume events are ignored.
> + *
> + * Note:
> + *
> + * Brightness zero should not turn off backlight it should be the minimum
> + * brightness, DPMS handles power.
> + *
> + * This function must be called from &drm_connector_funcs->late_register() since
> + * it depends on the sysfs device.
> + *
> + * Returns:
> + * Zero on success or negative error code on failure.
> + */
> +int drm_backlight_register(struct drm_connector *connector)
> +{
> + const char *name = NULL;
> + int ret;
> +
> + name = kasprintf(GFP_KERNEL, "card%d-%s-backlight",
> + connector->dev->primary->index, connector->name);
> + if (!name)
> + return -ENOMEM;
> +
> + ret = drm_backlight_register_with_name(connector, name);
> + kfree(name);
> +
> + return ret;
> +}
> +EXPORT_SYMBOL(drm_backlight_register);
> +
> +/**
> + * drm_backlight_unregister() - Unregister backlight device
> + * @connector: Connector
> + *
> + * Unregister a backlight device. This must be called from the
> + * &drm_connector_funcs->early_unregister() callback.
> + */
> +void drm_backlight_unregister(struct drm_connector *connector)
> +{
> + backlight_device_unregister(connector->backlight);
> +}
> +EXPORT_SYMBOL(drm_backlight_unregister);
> diff --git a/include/drm/drm_backlight_helper.h b/include/drm/drm_backlight_helper.h
> new file mode 100644
> index 000000000000..4151b66eb0b4
> --- /dev/null
> +++ b/include/drm/drm_backlight_helper.h
> @@ -0,0 +1,9 @@
> +/* SPDX-License-Identifier: GPL-2.0 OR MIT */
> +
> +#ifndef _LINUX_DRM_BACKLIGHT_HELPER_H
> +#define _LINUX_DRM_BACKLIGHT_HELPER_H
> +
> +int drm_backlight_register(struct drm_connector *connector);
> +void drm_backlight_unregister(struct drm_connector *connector);
> +
> +#endif
> diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
> index 221910948b37..ce678b694f45 100644
> --- a/include/drm/drm_connector.h
> +++ b/include/drm/drm_connector.h
> @@ -32,6 +32,7 @@
>
> #include <uapi/drm/drm_mode.h>
>
> +struct backlight_device;
> struct drm_connector_helper_funcs;
> struct drm_modeset_acquire_ctx;
> struct drm_device;
> @@ -656,6 +657,12 @@ struct drm_connector_state {
> */
> u8 max_bpc;
>
> + /**
> + * @backlight_brightness: Brightness value of the connector backlight
> + * device. See drm_backlight_register().
> + */
> + u8 backlight_brightness;
> +
> /**
> * @hdr_output_metadata:
> * DRM blob property for HDR output metadata
> @@ -1422,6 +1429,9 @@ struct drm_connector {
>
> /** @hdr_sink_metadata: HDR Metadata Information read from sink */
> struct hdr_sink_metadata hdr_sink_metadata;
> +
> + /** @backlight: Backlight device. See drm_backlight_register() */
> + struct backlight_device *backlight;
> };
>
> #define obj_to_connector(x) container_of(x, struct drm_connector, base)
>
More information about the dri-devel
mailing list