[PATCH v7 08/12] arm: dts: s5pv210: Add node for SGX 540

[Paul Cercueil]

Hi Jonathan,

Le mar. 28 avril 2020 à 15:58, Jonathan Bakker <xc-racer2 at live.ca> a 
écrit :
> Hi all,
> 
> On 2020-04-28 2:39 p.m., Jonathan Bakker wrote:
>>  Hi Krzysztof,
>> 
>>  On 2020-04-27 8:46 a.m., Krzysztof Kozlowski wrote:
>>>  On Sun, Apr 26, 2020 at 07:57:12AM -0700, Jonathan Bakker wrote:
>>>>  Hi Paul,
>>>> 
>>>>  On 2020-04-26 5:56 a.m., Paul Cercueil wrote:
>>>>> 
>>>>> 
>>>>>  Le ven. 24 avril 2020 à 22:34, H. Nikolaus Schaller 
>>>>> <hns at goldelico.com> a écrit :
>>>>>>  From: Jonathan Bakker <xc-racer2 at live.ca>
>>>>>> 
>>>>>>  All s5pv210 devices have a PowerVR SGX 540 (revision 120) 
>>>>>> attached.
>>>>>> 
>>>>>>  There is no external regulator for it so it can be enabled by 
>>>>>> default.
>>>>>> 
>>>>>>  Signed-off-by: Jonathan Bakker <xc-racer2 at live.ca>
>>>>>>  Signed-off-by: H. Nikolaus Schaller <hns at goldelico.com>
>>>>>>  ---
>>>>>>   arch/arm/boot/dts/s5pv210.dtsi | 13 +++++++++++++
>>>>>>   1 file changed, 13 insertions(+)
>>>>>> 
>>>>>>  diff --git a/arch/arm/boot/dts/s5pv210.dtsi 
>>>>>> b/arch/arm/boot/dts/s5pv210.dtsi
>>>>>>  index 2ad642f51fd9..abbdda205c1b 100644
>>>>>>  --- a/arch/arm/boot/dts/s5pv210.dtsi
>>>>>>  +++ b/arch/arm/boot/dts/s5pv210.dtsi
>>>>>>  @@ -512,6 +512,19 @@ vic3: interrupt-controller at f2300000 {
>>>>>>               #interrupt-cells = <1>;
>>>>>>           };
>>>>>> 
>>>>>>  +        gpu: gpu at f3000000 {
>>>>>>  +            compatible = "samsung,s5pv210-sgx540-120";
>>> 
>>>  This should not pass the bindings check because you missed last
>>>  compatibles.
>>> 
>> 
>>  Thanks for pointing that out, I'll add it and make sure it passes 
>> the bindings check.
>> 
>>>>>>  +            reg = <0xf3000000 0x10000>;
>>>>>>  +            interrupt-parent = <&vic2>;
>>>>>>  +            interrupts = <10>;
>>>>>>  +            clock-names = "core";
>>>>>>  +            clocks = <&clocks CLK_G3D>;
>>>>>>  +
>>>>>>  +            assigned-clocks = <&clocks MOUT_G3D>, <&clocks 
>>>>>> DOUT_G3D>;
>>>>>>  +            assigned-clock-rates = <0>, <66700000>;
>>>>>>  +            assigned-clock-parents = <&clocks MOUT_MPLL>;
>>>>> 
>>>>>  What are these clocks for, and why are they reparented / 
>>>>> reclocked?
>>>>> 
>>>>>  Shouldn't they be passed to 'clocks' as well?
>>>>> 
>>>>>  -Paul
>>>>> 
>>>> 
>>>>  The G3D clock system can have multiple parents, and for stable 
>>>> operation
>>>>  it's recommended to use the MPLL clock as the parent (which in 
>>>> turn
>>>>  is actually a mux as well).  MOUT_G3D is simply the mux for 
>>>> CLK_G3D
>>>>  (SGX core clock), DOUT_G3D is the divider.  DOUT_G3D could 
>>>> equally be CLK_G3D
>>>>  (and probably should be, for readability) as CLK_G3D is simply 
>>>> the gate and
>>>>  DOUT_G3D is the divider for it.
>>> 
>>>  Good point, it should be CLK_G3D instead of DOUT.  Can you fix 
>>> this as
>>>  well?
>> 
>>  Yep, will do.  Nikolaus, I'll send you an updated patch to include.
>> 
> 
> How are assigned-clocks handled in the yaml DT schema?  When running 
> make dtbs_check,
> I end up with messages such as
> 
> arch/arm/boot/dts/s5pv210-aquila.dt.yaml: gpu at f3000000: 
> 'assigned-clock-parents', 'assigned-clock-rates', 'assigned-clocks' 
> do not match any of the regexes: 'pinctrl-[0-9]+'
> 
> Do they need to explicitly be listed as valid entries?

The assigned-* can also be moved inside the node of the clocks 
provider. I would say it makes more sense to have them there.

-Paul