[PATCH v6 1/3] dt-bindings: display: Document the Xylon LogiCVC display controller
Paul Kocialkowski
paul.kocialkowski at bootlin.com
Thu Apr 30 19:27:44 UTC 2020
The Xylon LogiCVC is a display controller implemented as programmable
logic in Xilinx FPGAs.
Signed-off-by: Paul Kocialkowski <paul.kocialkowski at bootlin.com>
Acked-by: Rob Herring <robh at kernel.org>
---
.../display/xylon,logicvc-display.yaml | 313 ++++++++++++++++++
1 file changed, 313 insertions(+)
create mode 100644 Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
diff --git a/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
new file mode 100644
index 000000000000..817fcced764f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/xylon,logicvc-display.yaml
@@ -0,0 +1,313 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 Bootlin
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/xylon,logicvc-display.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Xylon LogiCVC display controller
+
+maintainers:
+ - Paul Kocialkowski <paul.kocialkowski at bootlin.com>
+
+description: |
+ The Xylon LogiCVC is a display controller that supports multiple layers.
+ It is usually implemented as programmable logic and was optimized for use
+ with Xilinx Zynq-7000 SoCs and Xilinx FPGAs.
+
+ Because the controller is intended for use in a FPGA, most of the
+ configuration of the controller takes place at logic configuration bitstream
+ synthesis time. As a result, many of the device-tree bindings are meant to
+ reflect the synthesis configuration and must not be configured differently.
+ Matching synthesis parameters are provided when applicable.
+
+ Layers are declared in the "layers" sub-node and have dedicated configuration.
+ In version 3 of the controller, each layer has fixed memory offset and address
+ starting from the video memory base address for its framebuffer. In version 4,
+ framebuffers are configured with a direct memory address instead.
+
+properties:
+ compatible:
+ enum:
+ - xylon,logicvc-3.02.a-display
+ - xylon,logicvc-4.01.a-display
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ # vclk is required and must be provided as first item.
+ - const: vclk
+ # Other clocks are optional and can be provided in any order.
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+ - enum:
+ - vclk2
+ - lvdsclk
+ - lvdsclkn
+
+ interrupts:
+ maxItems: 1
+
+ memory-region:
+ maxItems: 1
+
+ xylon,display-interface:
+ enum:
+ # Parallel RGB interface (C_DISPLAY_INTERFACE == 0)
+ - parallel-rgb
+ # ITU-T BR656 interface (C_DISPLAY_INTERFACE == 1)
+ - bt656
+ # 4-bit LVDS interface (C_DISPLAY_INTERFACE == 2)
+ - lvds-4bits
+ # 3-bit LVDS interface (C_DISPLAY_INTERFACE == 4)
+ - lvds-3bits
+ # DVI interface (C_DISPLAY_INTERFACE == 5)
+ - dvi
+ description: Display output interface (C_DISPLAY_INTERFACE).
+
+ xylon,display-colorspace:
+ enum:
+ # RGB colorspace (C_DISPLAY_COLOR_SPACE == 0)
+ - rgb
+ # YUV 4:2:2 colorspace (C_DISPLAY_COLOR_SPACE == 1)
+ - yuv422
+ # YUV 4:4:4 colorspace (C_DISPLAY_COLOR_SPACE == 2)
+ - yuv444
+ description: Display output colorspace (C_DISPLAY_COLOR_SPACE).
+
+ xylon,display-depth:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: Display output depth (C_PIXEL_DATA_WIDTH).
+
+ xylon,row-stride:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: Fixed number of pixels in a framebuffer row (C_ROW_STRIDE).
+
+ xylon,syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description: |
+ Syscon phandle representing the top-level logicvc instance, useful when
+ the parent node is not the top-level logicvc instance.
+
+ xylon,dithering:
+ $ref: "/schemas/types.yaml#/definitions/flag"
+ description: Dithering module is enabled (C_XCOLOR)
+
+ xylon,background-layer:
+ $ref: "/schemas/types.yaml#/definitions/flag"
+ description: |
+ The last layer is used to display a black background (C_USE_BACKGROUND).
+ The layer must still be registered.
+
+ xylon,layers-configurable:
+ $ref: "/schemas/types.yaml#/definitions/flag"
+ description: |
+ Configuration of layers' size, position and offset is enabled
+ (C_USE_SIZE_POSITION).
+
+ layers:
+ type: object
+
+ properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ patternProperties:
+ "^layer@[0-9]+$":
+ type: object
+
+ properties:
+ reg:
+ maxItems: 1
+
+ xylon,layer-depth:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: Layer depth (C_LAYER_X_DATA_WIDTH).
+
+ xylon,layer-colorspace:
+ enum:
+ # RGB colorspace (C_LAYER_X_TYPE == 0)
+ - rgb
+ # YUV packed colorspace (C_LAYER_X_TYPE == 0)
+ - yuv
+ description: Layer colorspace (C_LAYER_X_TYPE).
+
+ xylon,layer-alpha-mode:
+ enum:
+ # Alpha is configured layer-wide (C_LAYER_X_ALPHA_MODE == 0)
+ - layer
+ # Alpha is configured per-pixel (C_LAYER_X_ALPHA_MODE == 1)
+ - pixel
+ description: Alpha mode for the layer (C_LAYER_X_ALPHA_MODE).
+
+ xylon,layer-base-offset:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: |
+ Offset in number of lines (C_LAYER_X_OFFSET) starting from the
+ video RAM base (C_VMEM_BASEADDR), only for version 3.
+
+ xylon,layer-buffer-offset:
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+ description: |
+ Offset in number of lines (C_BUFFER_*_OFFSET) starting from the
+ layer base offset for the second buffer used in double-buffering.
+
+ xylon,layer-primary:
+ $ref: "/schemas/types.yaml#/definitions/flag"
+ description: |
+ Layer should be registered as a primary plane (exactly one is
+ required).
+
+ additionalProperties: false
+
+ required:
+ - reg
+ - xylon,layer-depth
+ - xylon,layer-colorspace
+ - xylon,layer-alpha-mode
+
+ required:
+ - "#address-cells"
+ - "#size-cells"
+ - layer at 0
+
+ additionalProperties: false
+
+ description: |
+ The description of the display controller layers, containing layer
+ sub-nodes that each describe a registered layer.
+
+ ports:
+ type: object
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+ - xylon,display-interface
+ - xylon,display-colorspace
+ - xylon,display-depth
+ - xylon,row-stride
+ - layers
+ - ports
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ logicvc: logicvc at 43c00000 {
+ compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
+ reg = <0x43c00000 0x6000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ logicvc_display: display-engine at 0 {
+ compatible = "xylon,logicvc-3.02.a-display";
+ reg = <0x0 0x6000>;
+
+ memory-region = <&logicvc_cma>;
+
+ clocks = <&logicvc_vclk 0>, <&logicvc_lvdsclk 0>;
+ clock-names = "vclk", "lvdsclk";
+
+ interrupt-parent = <&intc>;
+ interrupts = <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ xylon,display-interface = "lvds-4bits";
+ xylon,display-colorspace = "rgb";
+ xylon,display-depth = <16>;
+ xylon,row-stride = <1024>;
+
+ xylon,layers-configurable;
+
+ layers {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ layer at 0 {
+ reg = <0>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <0>;
+ xylon,layer-buffer-offset = <480>;
+ xylon,layer-primary;
+ };
+
+ layer at 1 {
+ reg = <1>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <2400>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer at 2 {
+ reg = <2>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <960>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer at 3 {
+ reg = <3>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <480>;
+ xylon,layer-buffer-offset = <480>;
+ };
+
+ layer at 4 {
+ reg = <4>;
+ xylon,layer-depth = <16>;
+ xylon,layer-colorspace = "rgb";
+ xylon,layer-alpha-mode = "layer";
+ xylon,layer-base-offset = <8192>;
+ xylon,layer-buffer-offset = <480>;
+ };
+ };
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ logicvc_out: port at 1 {
+ reg = <1>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ logicvc_output: endpoint at 0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+ };
+ };
--
2.26.0
More information about the dri-devel
mailing list