[PATCH 3/4] drm/panel: s6e63m0: Add reading functionality
Linus Walleij
linus.walleij at linaro.org
Sun Aug 9 21:51:03 UTC 2020
This adds code to send read commands to read a single
byte from the display, in order to perform MTP ID
look-up of the mounted panel on the s6e63m0 controller.
This is needed for proper biasing on the DSI variants.
Cc: Stephan Gerhold <stephan at gerhold.net>
Cc: Paweł Chmiel <pawel.mikolaj.chmiel at gmail.com>
Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
---
.../gpu/drm/panel/panel-samsung-s6e63m0-dsi.c | 19 ++++++++++++++++++-
.../gpu/drm/panel/panel-samsung-s6e63m0-spi.c | 14 +++++++++++++-
drivers/gpu/drm/panel/panel-samsung-s6e63m0.c | 11 +++++++++++
drivers/gpu/drm/panel/panel-samsung-s6e63m0.h | 1 +
4 files changed, 43 insertions(+), 2 deletions(-)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
index f4927a6ce26d..2ec9e7900791 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-dsi.c
@@ -16,6 +16,22 @@
#define MCS_GLOBAL_PARAM 0xb0
#define S6E63M0_DSI_MAX_CHUNK 15 /* CMD + 15 bytes max */
+static int s6e63m0_dsi_dcs_read(struct device *dev, const u8 cmd, u8 *data)
+{
+ struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
+ int ret;
+
+ ret = mipi_dsi_dcs_read(dsi, cmd, data, 1);
+ if (ret < 0) {
+ DRM_DEV_ERROR(dev, "could not read DCS CMD %02x\n", cmd);
+ return ret;
+ }
+
+ DRM_DEV_INFO(dev, "DSI read CMD %02x = %02x\n", cmd, *data);
+
+ return 0;
+}
+
static int s6e63m0_dsi_dcs_write(struct device *dev, const u8 *data, size_t len)
{
struct mipi_dsi_device *dsi = to_mipi_dsi_device(dev);
@@ -90,7 +106,8 @@ static int s6e63m0_dsi_probe(struct mipi_dsi_device *dsi)
MIPI_DSI_MODE_EOT_PACKET |
MIPI_DSI_MODE_VIDEO_BURST;
- ret = s6e63m0_probe(dev, s6e63m0_dsi_dcs_write, true);
+ ret = s6e63m0_probe(dev, s6e63m0_dsi_dcs_read, s6e63m0_dsi_dcs_write,
+ true);
if (ret)
return ret;
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
index 0587eac52f2a..3b1a2a3a44ea 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0-spi.c
@@ -11,6 +11,17 @@
#define DATA_MASK 0x100
+static int s6e63m0_spi_dcs_read(struct device *dev, const u8 cmd, u8 *data)
+{
+ /*
+ * FIXME: implement reading DCS commands over SPI so we can
+ * properly identify which physical panel is connected.
+ */
+ *data = 0;
+
+ return 0;
+}
+
static int s6e63m0_spi_write_word(struct device *dev, u16 data)
{
struct spi_device *spi = to_spi_device(dev);
@@ -60,7 +71,8 @@ static int s6e63m0_spi_probe(struct spi_device *spi)
DRM_DEV_ERROR(dev, "spi setup failed.\n");
return ret;
}
- return s6e63m0_probe(dev, s6e63m0_spi_dcs_write, false);
+ return s6e63m0_probe(dev, s6e63m0_spi_dcs_read, s6e63m0_spi_dcs_write,
+ false);
}
static int s6e63m0_spi_remove(struct spi_device *spi)
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
index c6d17e938955..b25021bdd724 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.c
@@ -87,6 +87,7 @@ static u8 const s6e63m0_gamma_22[NUM_GAMMA_LEVELS][GAMMA_TABLE_COUNT] = {
struct s6e63m0 {
struct device *dev;
+ int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val);
int (*dcs_write)(struct device *dev, const u8 *data, size_t len);
struct drm_panel panel;
struct backlight_device *bl_dev;
@@ -136,6 +137,14 @@ static int s6e63m0_clear_error(struct s6e63m0 *ctx)
return ret;
}
+static void s6e63m0_dcs_read(struct s6e63m0 *ctx, const u8 cmd, u8 *data)
+{
+ if (ctx->error < 0)
+ return;
+
+ ctx->error = ctx->dcs_read(ctx->dev, cmd, data);
+}
+
static void s6e63m0_dcs_write(struct s6e63m0 *ctx, const u8 *data, size_t len)
{
if (ctx->error < 0 || len == 0)
@@ -403,6 +412,7 @@ static int s6e63m0_backlight_register(struct s6e63m0 *ctx)
}
int s6e63m0_probe(struct device *dev,
+ int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val),
int (*dcs_write)(struct device *dev, const u8 *data, size_t len),
bool dsi_mode)
{
@@ -413,6 +423,7 @@ int s6e63m0_probe(struct device *dev,
if (!ctx)
return -ENOMEM;
+ ctx->dcs_read = dcs_read;
ctx->dcs_write = dcs_write;
dev_set_drvdata(dev, ctx);
diff --git a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h
index 229e23b0c97a..c669fec91763 100644
--- a/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h
+++ b/drivers/gpu/drm/panel/panel-samsung-s6e63m0.h
@@ -4,6 +4,7 @@
#define _PANEL_SAMSUNG_S6E63M0_H
int s6e63m0_probe(struct device *dev,
+ int (*dcs_read)(struct device *dev, const u8 cmd, u8 *val),
int (*dcs_write)(struct device *dev, const u8 *data,
size_t len),
bool dsi_mode);
--
2.26.2
More information about the dri-devel
mailing list