[PATCH 2/7] drm: rcar-du: Add r8a7742 support

[Lad, Prabhakar]

Hi Laurent,

Thank you for the review.

On Sat, Aug 8, 2020 at 10:02 PM Laurent Pinchart
<laurent.pinchart at ideasonboard.com> wrote:
>
> Hi Prabhakar,
>
> Thank you for the patch.
>
> On Fri, Aug 07, 2020 at 06:49:49PM +0100, Lad Prabhakar wrote:
> > Add direct support for the r8a7742 (RZ/G1H).
> >
> > The RZ/G1H shares a common, compatible configuration with the r8a7790
> > (R-Car H2) so that device info structure is reused, the only difference
> > being TCON is unsupported on RZ/G1H (Currently unsupported by the driver).
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj at bp.renesas.com>
> > Reviewed-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb at bp.renesas.com>
> > ---
> >  drivers/gpu/drm/rcar-du/rcar_du_drv.c | 5 +++--
> >  1 file changed, 3 insertions(+), 2 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > index 3e67cf70f040..7e286c7a7a6c 100644
> > --- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > +++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c
> > @@ -216,8 +216,8 @@ static const struct rcar_du_device_info rcar_du_r8a7790_info = {
> >       .channels_mask = BIT(2) | BIT(1) | BIT(0),
> >       .routes = {
> >               /*
> > -              * R8A7790 has one RGB output, two LVDS outputs and one
> > -              * (currently unsupported) TCON output.
> > +              * R8A7742 and R8A7790 each have one RGB output and two LVDS outputs. Additionally
> > +              * R8A7790 supports one TCON output (currently unsupported by the driver).
>
> Once we support TCON we'll have to split this, but for now I suppose
> it's fine. Would you however mind wrapping this to 80 columns ? I can do
> so when applying if it's fine with you.
>
Agreed once TCON is added this has to be split. But isn't  the column
size has been increased (checkpatch too doesn't complain about), but
feel free to wrapp it for 80 columns.

Cheers,
Prabhakar

> Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
> >                */
> >               [RCAR_DU_OUTPUT_DPAD0] = {
> >                       .possible_crtcs = BIT(2) | BIT(1) | BIT(0),
> > @@ -443,6 +443,7 @@ static const struct rcar_du_device_info rcar_du_r8a7799x_info = {
> >  };
> >
> >  static const struct of_device_id rcar_du_of_table[] = {
> > +     { .compatible = "renesas,du-r8a7742", .data = &rcar_du_r8a7790_info },
> >       { .compatible = "renesas,du-r8a7743", .data = &rzg1_du_r8a7743_info },
> >       { .compatible = "renesas,du-r8a7744", .data = &rzg1_du_r8a7743_info },
> >       { .compatible = "renesas,du-r8a7745", .data = &rzg1_du_r8a7745_info },
>
> --
> Regards,
>
> Laurent Pinchart