[PATCH v8 1/2] dt-binding: Add DSI/LVDS TC358775 bridge bindings

Vinay Simha B N simhavcs at gmail.com
Wed Aug 12 02:18:50 UTC 2020


Sam,

Thanks.

On Mon, Aug 10, 2020 at 11:08 PM Sam Ravnborg <sam at ravnborg.org> wrote:

> Hi Vinay.
>
> On Wed, Jul 29, 2020 at 06:01:21PM +0530, Vinay Simha B N wrote:
> > Hi All,
> >
> > Please Review the patch
> >
> > On Fri, Jul 10, 2020 at 7:11 PM Vinay Simha BN <simhavcs at gmail.com>
> wrote:
> >
> > > - license modified to (GPL-2.0-only OR BSD-2-Clause)
> > > - single-link and dual-link lvds description and
> > >   examples are added
> > > - proper indentation
> > > - VESA/JEIDA formats picked from panel-lvds dts
> > > - dsi data-lanes property removed, it will be picked
> > >   from dsi0 ports
> > > - dual-link lvds port added and implemented
> > > - converted from .txt to .yaml
> > >
> > > Signed-off-by: Vinay Simha BN <simhavcs at gmail.com>
> > > Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> > > Reviewed-by: Rob Herring <robh at kernel.org>
>
> The binding is already reviewed by Rob and me - as you have recorded
> above. It will be applied when the driver is ready.
>
>         Sam
>
> > > ---
> > > v1:
> > >  Initial version wast .txt file
> > >
> > > v2:
> > >  From txt to yaml file format
> > >
> > > v3:
> > > * Andrzej Hajda review comments incorporated
> > >   dual port lvds implemented
> > >
> > > * Laurent Pinchart review comments incorporated
> > >   dsi lanes property removed and it is dynamically
> > >   picked from the dsi ports
> > >   VESA/JEIDA format picked from panel-lvds dts
> > >
> > > v4:
> > > * Sam Ravnborg review comments incorporated
> > >   }' is indented properly in examples data-lanes
> > >   description for single-link and dual-link lvds
> > >
> > > v5:
> > > * Sam Ravnborg review comments incorporated
> > >   license modified to (GPL-2.0-only OR BSD-2-Clause)
> > >   changelog added
> > >
> > > v6:
> > > * No changes, revision version mentioned to inline with
> > >   driver file
> > >
> > > v7:
> > > * change log added
> > >   Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> > >
> > > v8:
> > > * Reviewed-by: Rob Herring <robh at kernel.org>
> > > * change log modified in reverse chronological order
> > > ---
> > >  .../bindings/display/bridge/toshiba,tc358775.yaml  | 215
> > > +++++++++++++++++++++
> > >  1 file changed, 215 insertions(+)
> > >  create mode 100644
> > > Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > >
> > > diff --git
> > >
> a/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > >
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > > new file mode 100644
> > > index 0000000..31f085d
> > > --- /dev/null
> > > +++
> > >
> b/Documentation/devicetree/bindings/display/bridge/toshiba,tc358775.yaml
> > > @@ -0,0 +1,215 @@
> > > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id:
> http://devicetree.org/schemas/display/bridge/toshiba,tc358775.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Toshiba TC358775 DSI to LVDS bridge bindings
> > > +
> > > +maintainers:
> > > + - Vinay Simha BN <simhavcs at gmail.com>
> > > +
> > > +description: |
> > > + This binding supports DSI to LVDS bridge TC358775
> > > +
> > > + MIPI DSI-RX Data 4-lane, CLK 1-lane with data rates up to 800
> Mbps/lane.
> > > + Video frame size:
> > > + Up to 1600x1200 24-bit/pixel resolution for single-link LVDS display
> > > panel
> > > + limited by 135 MHz LVDS speed
> > > + Up to WUXGA (1920x1200 24-bit pixels) resolution for dual-link LVDS
> > > display
> > > + panel, limited by 270 MHz LVDS speed.
> > > +
> > > +properties:
> > > +  compatible:
> > > +    const: toshiba,tc358775
> > > +
> > > +  reg:
> > > +    maxItems: 1
> > > +    description: i2c address of the bridge, 0x0f
> > > +
> > > +  vdd-supply:
> > > +    maxItems: 1
> > > +    description:  1.2V LVDS Power Supply
> > > +
> > > +  vddio-supply:
> > > +    maxItems: 1
> > > +    description: 1.8V IO Power Supply
> > > +
> > > +  stby-gpios:
> > > +    maxItems: 1
> > > +    description: Standby pin, Low active
> > > +
> > > +  reset-gpios:
> > > +    maxItems: 1
> > > +    description: Hardware reset, Low active
> > > +
> > > +  ports:
> > > +    type: object
> > > +    description:
> > > +      A node containing input and output port nodes with endpoint
> > > definitions
> > > +      as documented in
> > > +      Documentation/devicetree/bindings/media/video-interfaces.txt
> > > +    properties:
> > > +      "#address-cells":
> > > +        const: 1
> > > +
> > > +      "#size-cells":
> > > +        const: 0
> > > +
> > > +      port at 0:
> > > +        type: object
> > > +        description: |
> > > +          DSI Input. The remote endpoint phandle should be a
> > > +          reference to a valid mipi_dsi_host device node.
> > > +
> > > +      port at 1:
> > > +        type: object
> > > +        description: |
> > > +          Video port for LVDS output (panel or connector).
> > > +
> > > +      port at 2:
> > > +        type: object
> > > +        description: |
> > > +          Video port for Dual link LVDS output (panel or connector).
> > > +
> > > +    required:
> > > +      - port at 0
> > > +      - port at 1
> > > +
> > > +required:
> > > + - compatible
> > > + - reg
> > > + - vdd-supply
> > > + - vddio-supply
> > > + - stby-gpios
> > > + - reset-gpios
> > > + - ports
> > > +
> > > +examples:
> > > + - |
> > > +    #include <dt-bindings/gpio/gpio.h>
> > > +
> > > +    /* For single-link LVDS display panel */
> > > +
> > > +    i2c at 78b8000 {
> > > +        /* On High speed expansion */
> > > +        label = "HS-I2C2";
> > > +        reg = <0x078b8000 0x500>;
> > > +        clock-frequency = <400000>; /* fastmode operation */
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        tc_bridge: bridge at f {
> > > +            compatible = "toshiba,tc358775";
> > > +            reg = <0x0f>;
> > > +
> > > +            vdd-supply = <&pm8916_l2>;
> > > +            vddio-supply = <&pm8916_l6>;
> > > +
> > > +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> > > +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> > > +
> > > +            ports {
> > > +                #address-cells = <1>;
> > > +                #size-cells = <0>;
> > > +
> > > +                port at 0 {
> > > +                    reg = <0>;
> > > +                    d2l_in_test: endpoint {
> > > +                        remote-endpoint = <&dsi0_out>;
> > > +                    };
> > > +                };
> > > +
> > > +                port at 1 {
> > > +                    reg = <1>;
> > > +                    lvds_out: endpoint {
> > > +                        remote-endpoint = <&panel_in>;
> > > +                    };
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +    dsi at 1a98000 {
> > > +        reg = <0x1a98000 0x25c>;
> > > +        reg-names = "dsi_ctrl";
> > > +
> > > +        ports {
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +            port at 1 {
> > > +                reg = <1>;
> > > +                dsi0_out: endpoint {
> > > +                    remote-endpoint = <&d2l_in_test>;
> > > +                    data-lanes = <0 1 2 3>;
> > > +                };
> > > +             };
> > > +         };
> > > +     };
> > > +
> > > + - |
> > > +    /* For dual-link LVDS display panel */
> > > +
> > > +    i2c at 78b8000 {
> > > +        /* On High speed expansion */
> > > +        label = "HS-I2C2";
> > > +        reg = <0x078b8000 0x500>;
> > > +        clock-frequency = <400000>; /* fastmode operation */
> > > +        #address-cells = <1>;
> > > +        #size-cells = <0>;
> > > +
> > > +        tc_bridge_dual: bridge at f {
> > > +            compatible = "toshiba,tc358775";
> > > +            reg = <0x0f>;
> > > +
> > > +            vdd-supply = <&pm8916_l2>;
> > > +            vddio-supply = <&pm8916_l6>;
> > > +
> > > +            stby-gpios = <&msmgpio 99 GPIO_ACTIVE_LOW>;
> > > +            reset-gpios = <&msmgpio 72 GPIO_ACTIVE_LOW>;
> > > +
> > > +            ports {
> > > +                #address-cells = <1>;
> > > +                #size-cells = <0>;
> > > +
> > > +                port at 0 {
> > > +                    reg = <0>;
> > > +                    d2l_in_dual: endpoint {
> > > +                        remote-endpoint = <&dsi0_out_dual>;
> > > +                    };
> > > +                };
> > > +
> > > +                port at 1 {
> > > +                    reg = <1>;
> > > +                    lvds0_out: endpoint {
> > > +                        remote-endpoint = <&panel_in0>;
> > > +                    };
> > > +                };
> > > +
> > > +                port at 2 {
> > > +                    reg = <2>;
> > > +                    lvds1_out: endpoint {
> > > +                        remote-endpoint = <&panel_in1>;
> > > +                    };
> > > +                };
> > > +            };
> > > +        };
> > > +    };
> > > +
> > > +    dsi at 1a98000 {
> > > +        reg = <0x1a98000 0x25c>;
> > > +        reg-names = "dsi_ctrl";
> > > +
> > > +        ports {
> > > +            #address-cells = <1>;
> > > +            #size-cells = <0>;
> > > +            port at 1 {
> > > +                reg = <1>;
> > > +                dsi0_out_dual: endpoint {
> > > +                    remote-endpoint = <&d2l_in_dual>;
> > > +                    data-lanes = <0 1 2 3>;
> > > +                };
> > > +             };
> > > +         };
> > > +     };
> > > +...
> > > --
> > > 2.1.2
> > >
> > >
> >
> > --
> > regards,
> > vinaysimha
>
> > _______________________________________________
> > dri-devel mailing list
> > dri-devel at lists.freedesktop.org
> > https://lists.freedesktop.org/mailman/listinfo/dri-devel
>
>

-- 
regards,
vinaysimha
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20200812/fe10976b/attachment-0001.htm>


More information about the dri-devel mailing list