[PATCH v1 4/5] drm/panel: sitronix: Use dev_ based logging

Sam Ravnborg sam at ravnborg.org
Sat Aug 15 12:54:05 UTC 2020


Standardize on the dev_ based logging and drop the include of drm_print.h.
Fix a few cases where "x@" was used when printing the mode.

Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Cc: Jagan Teki <jagan at amarulasolutions.com>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Sam Ravnborg <sam at ravnborg.org>
Cc: Guido Günther <agx at sigxcpu.org>
Cc: Linus Walleij <linus.walleij at linaro.org>
Cc: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
---
 drivers/gpu/drm/panel/panel-sitronix-st7701.c | 10 ++-
 drivers/gpu/drm/panel/panel-sitronix-st7703.c | 61 +++++++------------
 2 files changed, 27 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7701.c b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
index 12462114a52d..4d2a149b202c 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7701.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7701.c
@@ -7,7 +7,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #include <linux/gpio/consumer.h>
 #include <linux/delay.h>
@@ -269,10 +268,9 @@ static int st7701_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, desc_mode);
 	if (!mode) {
-		DRM_DEV_ERROR(&st7701->dsi->dev,
-			      "failed to add mode %ux%ux@%u\n",
-			      desc_mode->hdisplay, desc_mode->vdisplay,
-			      drm_mode_vrefresh(desc_mode));
+		dev_err(&st7701->dsi->dev, "failed to add mode %ux%u@%u\n",
+			desc_mode->hdisplay, desc_mode->vdisplay,
+			drm_mode_vrefresh(desc_mode));
 		return -ENOMEM;
 	}
 
@@ -358,7 +356,7 @@ static int st7701_dsi_probe(struct mipi_dsi_device *dsi)
 
 	st7701->reset = devm_gpiod_get(&dsi->dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(st7701->reset)) {
-		DRM_DEV_ERROR(&dsi->dev, "Couldn't get our reset GPIO\n");
+		dev_err(&dsi->dev, "Couldn't get our reset GPIO\n");
 		return PTR_ERR(st7701->reset);
 	}
 
diff --git a/drivers/gpu/drm/panel/panel-sitronix-st7703.c b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
index 8996ced2b721..c22e7c49e077 100644
--- a/drivers/gpu/drm/panel/panel-sitronix-st7703.c
+++ b/drivers/gpu/drm/panel/panel-sitronix-st7703.c
@@ -22,7 +22,6 @@
 #include <drm/drm_mipi_dsi.h>
 #include <drm/drm_modes.h>
 #include <drm/drm_panel.h>
-#include <drm/drm_print.h>
 
 #define DRV_NAME "panel-sitronix-st7703"
 
@@ -364,8 +363,7 @@ static int st7703_enable(struct drm_panel *panel)
 
 	ret = ctx->desc->init_sequence(ctx);
 	if (ret < 0) {
-		DRM_DEV_ERROR(ctx->dev, "Panel init sequence failed: %d\n",
-			      ret);
+		dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
 		return ret;
 	}
 
@@ -373,7 +371,7 @@ static int st7703_enable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
 		return ret;
 	}
 
@@ -384,7 +382,7 @@ static int st7703_enable(struct drm_panel *panel)
 	if (ret)
 		return ret;
 
-	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Panel init sequence done\n");
+	dev_dbg(ctx->dev, "Panel init sequence done\n");
 
 	return 0;
 }
@@ -397,13 +395,11 @@ static int st7703_disable(struct drm_panel *panel)
 
 	ret = mipi_dsi_dcs_set_display_off(dsi);
 	if (ret < 0)
-		DRM_DEV_ERROR(ctx->dev,
-			      "Failed to turn off the display: %d\n", ret);
+		dev_err(ctx->dev, "Failed to turn off the display: %d\n", ret);
 
 	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
 	if (ret < 0)
-		DRM_DEV_ERROR(ctx->dev,
-			      "Failed to enter sleep mode: %d\n", ret);
+		dev_err(ctx->dev, "Failed to enter sleep mode: %d\n", ret);
 
 	return 0;
 }
@@ -431,17 +427,15 @@ static int st7703_prepare(struct drm_panel *panel)
 	if (ctx->prepared)
 		return 0;
 
-	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Resetting the panel\n");
+	dev_dbg(ctx->dev, "Resetting the panel\n");
 	ret = regulator_enable(ctx->vcc);
 	if (ret < 0) {
-		DRM_DEV_ERROR(ctx->dev,
-			      "Failed to enable vcc supply: %d\n", ret);
+		dev_err(ctx->dev, "Failed to enable vcc supply: %d\n", ret);
 		return ret;
 	}
 	ret = regulator_enable(ctx->iovcc);
 	if (ret < 0) {
-		DRM_DEV_ERROR(ctx->dev,
-			      "Failed to enable iovcc supply: %d\n", ret);
+		dev_err(ctx->dev, "Failed to enable iovcc supply: %d\n", ret);
 		goto disable_vcc;
 	}
 
@@ -467,9 +461,9 @@ static int st7703_get_modes(struct drm_panel *panel,
 
 	mode = drm_mode_duplicate(connector->dev, ctx->desc->mode);
 	if (!mode) {
-		DRM_DEV_ERROR(ctx->dev, "Failed to add mode %ux%u@%u\n",
-			      ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
-			      drm_mode_vrefresh(ctx->desc->mode));
+		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+			ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+			drm_mode_vrefresh(ctx->desc->mode));
 		return -ENOMEM;
 	}
 
@@ -496,7 +490,7 @@ static int allpixelson_set(void *data, u64 val)
 	struct st7703 *ctx = data;
 	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
 
-	DRM_DEV_DEBUG_DRIVER(ctx->dev, "Setting all pixels on\n");
+	dev_dbg(ctx->dev, "Setting all pixels on\n");
 	dsi_generic_write_seq(dsi, ST7703_CMD_ALL_PIXEL_ON);
 	msleep(val * 1000);
 	/* Reset the panel to get video back */
@@ -537,7 +531,7 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 
 	ctx->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW);
 	if (IS_ERR(ctx->reset_gpio)) {
-		DRM_DEV_ERROR(dev, "cannot get reset gpio\n");
+		dev_err(dev, "cannot get reset gpio\n");
 		return PTR_ERR(ctx->reset_gpio);
 	}
 
@@ -554,18 +548,14 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 	if (IS_ERR(ctx->vcc)) {
 		ret = PTR_ERR(ctx->vcc);
 		if (ret != -EPROBE_DEFER)
-			DRM_DEV_ERROR(dev,
-				      "Failed to request vcc regulator: %d\n",
-				      ret);
+			dev_err(dev, "Failed to request vcc regulator: %d\n", ret);
 		return ret;
 	}
 	ctx->iovcc = devm_regulator_get(dev, "iovcc");
 	if (IS_ERR(ctx->iovcc)) {
 		ret = PTR_ERR(ctx->iovcc);
 		if (ret != -EPROBE_DEFER)
-			DRM_DEV_ERROR(dev,
-				      "Failed to request iovcc regulator: %d\n",
-				      ret);
+			dev_err(dev, "Failed to request iovcc regulator: %d\n", ret);
 		return ret;
 	}
 
@@ -580,17 +570,15 @@ static int st7703_probe(struct mipi_dsi_device *dsi)
 
 	ret = mipi_dsi_attach(dsi);
 	if (ret < 0) {
-		DRM_DEV_ERROR(dev,
-			      "mipi_dsi_attach failed (%d). Is host ready?\n",
-			      ret);
+		dev_err(dev, "mipi_dsi_attach failed (%d). Is host ready?\n", ret);
 		drm_panel_remove(&ctx->panel);
 		return ret;
 	}
 
-	DRM_DEV_INFO(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
-		     ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
-		     drm_mode_vrefresh(ctx->desc->mode),
-		     mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
+	dev_info(dev, "%ux%u@%u %ubpp dsi %udl - ready\n",
+		 ctx->desc->mode->hdisplay, ctx->desc->mode->vdisplay,
+		 drm_mode_vrefresh(ctx->desc->mode),
+		 mipi_dsi_pixel_format_to_bpp(dsi->format), dsi->lanes);
 
 	st7703_debugfs_init(ctx);
 	return 0;
@@ -603,13 +591,11 @@ static void st7703_shutdown(struct mipi_dsi_device *dsi)
 
 	ret = drm_panel_unprepare(&ctx->panel);
 	if (ret < 0)
-		DRM_DEV_ERROR(&dsi->dev, "Failed to unprepare panel: %d\n",
-			      ret);
+		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
 
 	ret = drm_panel_disable(&ctx->panel);
 	if (ret < 0)
-		DRM_DEV_ERROR(&dsi->dev, "Failed to disable panel: %d\n",
-			      ret);
+		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
 }
 
 static int st7703_remove(struct mipi_dsi_device *dsi)
@@ -621,8 +607,7 @@ static int st7703_remove(struct mipi_dsi_device *dsi)
 
 	ret = mipi_dsi_detach(dsi);
 	if (ret < 0)
-		DRM_DEV_ERROR(&dsi->dev, "Failed to detach from DSI host: %d\n",
-			      ret);
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
 
 	drm_panel_remove(&ctx->panel);
 
-- 
2.25.1



More information about the dri-devel mailing list