[PATCH 1/8] dt-bindings: display: mxsfb: Convert binding to YAML
Laurent Pinchart
laurent.pinchart at ideasonboard.com
Mon Aug 17 00:00:49 UTC 2020
Hi Sam,
On Sun, Aug 16, 2020 at 08:22:42AM +0200, Sam Ravnborg wrote:
> Hi Laurent.
>
> Good to see one of the imx bindings migrating to yaml.
>
> On Thu, Aug 13, 2020 at 04:29:03AM +0300, Laurent Pinchart wrote:
> > Convert the mxsfb binding to YAML. The deprecated binding is dropped, as
> > neither the DT sources nor the driver support it anymore.
> >
> > The compatible strings are messy, and DT sources use different kinds of
> > combination of documented and undocumented values. Keep it simple for
> > now, and update the example to make it valid. Aligning the binding with
> > the existing DT sources will be performed separately.
> >
> > Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
>
> Reviewed-by: Sam Ravnborg <sam at ravnborg.org>
> But see below for a few nits
>
> > ---
> > .../devicetree/bindings/display/mxsfb.txt | 87 -------------
> > .../devicetree/bindings/display/mxsfb.yaml | 115 ++++++++++++++++++
> > MAINTAINERS | 2 +-
> > 3 files changed, 116 insertions(+), 88 deletions(-)
> > delete mode 100644 Documentation/devicetree/bindings/display/mxsfb.txt
> > create mode 100644 Documentation/devicetree/bindings/display/mxsfb.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/display/mxsfb.txt b/Documentation/devicetree/bindings/display/mxsfb.txt
> > deleted file mode 100644
> > index c985871c46b3..000000000000
> > --- a/Documentation/devicetree/bindings/display/mxsfb.txt
> > +++ /dev/null
> > @@ -1,87 +0,0 @@
> > -* Freescale MXS LCD Interface (LCDIF)
> > -
> > -New bindings:
> > -=============
> > -Required properties:
> > -- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
> > - Should be "fsl,imx28-lcdif" for i.MX28.
> > - Should be "fsl,imx6sx-lcdif" for i.MX6SX.
> > - Should be "fsl,imx8mq-lcdif" for i.MX8MQ.
> > -- reg: Address and length of the register set for LCDIF
> > -- interrupts: Should contain LCDIF interrupt
> > -- clocks: A list of phandle + clock-specifier pairs, one for each
> > - entry in 'clock-names'.
> > -- clock-names: A list of clock names. For MXSFB it should contain:
> > - - "pix" for the LCDIF block clock
> > - - (MX6SX-only) "axi", "disp_axi" for the bus interface clock
> > -
> > -Required sub-nodes:
> > - - port: The connection to an encoder chip.
> > -
> > -Example:
> > -
> > - lcdif1: display-controller at 2220000 {
> > - compatible = "fsl,imx6sx-lcdif", "fsl,imx28-lcdif";
> > - reg = <0x02220000 0x4000>;
> > - interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > - clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
> > - <&clks IMX6SX_CLK_LCDIF_APB>,
> > - <&clks IMX6SX_CLK_DISPLAY_AXI>;
> > - clock-names = "pix", "axi", "disp_axi";
> > -
> > - port {
> > - parallel_out: endpoint {
> > - remote-endpoint = <&panel_in_parallel>;
> > - };
> > - };
> > - };
> > -
> > -Deprecated bindings:
> > -====================
> > -Required properties:
> > -- compatible: Should be "fsl,imx23-lcdif" for i.MX23.
> > - Should be "fsl,imx28-lcdif" for i.MX28.
> > -- reg: Address and length of the register set for LCDIF
> > -- interrupts: Should contain LCDIF interrupts
> > -- display: phandle to display node (see below for details)
> > -
> > -* display node
> > -
> > -Required properties:
> > -- bits-per-pixel: <16> for RGB565, <32> for RGB888/666.
> > -- bus-width: number of data lines. Could be <8>, <16>, <18> or <24>.
> > -
> > -Required sub-node:
> > -- display-timings: Refer to binding doc display-timing.txt for details.
> > -
> > -Examples:
> > -
> > -lcdif at 80030000 {
> > - compatible = "fsl,imx28-lcdif";
> > - reg = <0x80030000 2000>;
> > - interrupts = <38 86>;
> > -
> > - display: display {
> > - bits-per-pixel = <32>;
> > - bus-width = <24>;
> > -
> > - display-timings {
> > - native-mode = <&timing0>;
> > - timing0: timing0 {
> > - clock-frequency = <33500000>;
> > - hactive = <800>;
> > - vactive = <480>;
> > - hfront-porch = <164>;
> > - hback-porch = <89>;
> > - hsync-len = <10>;
> > - vback-porch = <23>;
> > - vfront-porch = <10>;
> > - vsync-len = <10>;
> > - hsync-active = <0>;
> > - vsync-active = <0>;
> > - de-active = <1>;
> > - pixelclk-active = <0>;
> > - };
> > - };
> > - };
> > -};
> > diff --git a/Documentation/devicetree/bindings/display/mxsfb.yaml b/Documentation/devicetree/bindings/display/mxsfb.yaml
> > new file mode 100644
> > index 000000000000..202381ec5bb7
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/display/mxsfb.yaml
> > @@ -0,0 +1,115 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/display/mxsfb.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Freescale/NXP i.MX LCD Interface (LCDIF)
> > +
> > +maintainers:
> > + - Marek Vasut <marex at denx.de>
> > + - Stefan Agner <stefan at agner.ch>
> > +
> > +description: |
> > + (e)LCDIF display controller found in the Freescale/NXP i.MX SoCs.
> > +
> > +properties:
> > + compatible:
> > + enum:
> > + - fsl,imx23-lcdif
> > + - fsl,imx28-lcdif
> > + - fsl,imx6sx-lcdif
> > + - fsl,imx8mq-lcdif
> > +
> > + reg:
> > + maxItems: 1
> > +
> > + clocks:
> > + items:
> > + - description: Pixel clock
> > + - description: Bus clock
> > + - description: Display AXI clock
> > + minItems: 1
> > +
> > + clock-names:
> > + items:
> > + - const: "pix"
> > + - const: "axi"
> > + - const: "disp_axi"
> > + minItems: 1
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + port:
> > + description: The LCDIF output port
> > + type: object
> > +
> > + properties:
> > + endpoint:
> > + type: object
> > +
> > + properties:
> > + remote-endpoint:
> > + $ref: /schemas/types.yaml#/definitions/phandle
> > +
> > + required:
> > + - remote-endpoint
> > +
> > + additionalProperties: false
> > +
> > + additionalProperties: false
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - clocks
> > + - interrupts
> > + - port
> > +
> > +additionalProperties: false
> > +
> > +allOf:
> > + - if:
> > + properties:
> > + compatible:
> > + contains:
> > + const: fsl,imx6sx-lcdif
> > + then:
> > + properties:
> > + clocks:
> > + minItems: 2
> > + maxItems: 3
> > + clock-names:
> > + minItems: 2
> > + maxItems: 3
> > + required:
> > + - clock-names
> > + else:
> > + properties:
> > + clocks:
> > + minItems: 1
> > + clock-names:
> > + minItems: 1
>
> The else parts looks like it is not needed.
> The clock, clock-names properties has minItems: 1 already from above.
Conceptually you're right, this should be maxItems, not minItems.
However, the DT schema checker automatically adds a maxItems property
that equal minItems when only minItems is specified (and the other way
around as well). This is meant to allow shorter notations. I'm not
convinced it's a good idea, but that's the way it is today.
I'll change to maxItems as it's more explicit.
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/clock/imx6sx-clock.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + display-controller at 2220000 {
> > + compatible = "fsl,imx6sx-lcdif";
> > + reg = <0x02220000 0x4000>;
> > + interrupts = <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&clks IMX6SX_CLK_LCDIF1_PIX>,
> > + <&clks IMX6SX_CLK_LCDIF_APB>,
> > + <&clks IMX6SX_CLK_DISPLAY_AXI>;
> > + clock-names = "pix", "axi", "disp_axi";
> > +
> > + port {
> > + endpoint {
> > + remote-endpoint = <&panel_in>;
> > + };
> > + };
> > + };
>
> empty line before "..." - at least most files have it
I'll add that.
> > +...
> > diff --git a/MAINTAINERS b/MAINTAINERS
> > index e3467e88714f..e3fac23383d2 100644
> > --- a/MAINTAINERS
> > +++ b/MAINTAINERS
> > @@ -11757,7 +11757,7 @@ M: Stefan Agner <stefan at agner.ch>
> > L: dri-devel at lists.freedesktop.org
> > S: Supported
> > T: git git://anongit.freedesktop.org/drm/drm-misc
> > -F: Documentation/devicetree/bindings/display/mxsfb.txt
> > +F: Documentation/devicetree/bindings/display/mxsfb.yaml
> > F: drivers/gpu/drm/mxsfb/
> >
> > MYLEX DAC960 PCI RAID Controller
--
Regards,
Laurent Pinchart
More information about the dri-devel
mailing list