[PATCH v2 1/3] dt-bindings: display: bridge: Add documentation for LT9611UXC

[Sam Ravnborg]

On Fri, Aug 28, 2020 at 06:49:04PM +0300, Dmitry Baryshkov wrote:
> Lontium LT9611UXC is a DSI to HDMI bridge which supports 2 DSI ports
> and I2S port as input and one HDMI port as output. The LT9611UXC chip is
> handled by a separate driver, but the bindings used are fully compatible
> with the LT9611 chip, so let's reuse the lt9611.yaml schema.
> 
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov at linaro.org>
> Acked-by: Vinod Koul <vkoul at kernel.org>
Acked-by: Sam Ravnborg <sam at ravnborg.org>

We can apply this when the driver is ready.

	Sam

> ---
>  .../devicetree/bindings/display/bridge/lontium,lt9611.yaml   | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> index d60208359234..7a1c89b995e2 100644
> --- a/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> +++ b/Documentation/devicetree/bindings/display/bridge/lontium,lt9611.yaml
> @@ -4,18 +4,19 @@
>  $id: http://devicetree.org/schemas/display/bridge/lontium,lt9611.yaml#
>  $schema: http://devicetree.org/meta-schemas/core.yaml#
>  
> -title: Lontium LT9611 2 Port MIPI to HDMI Bridge
> +title: Lontium LT9611(UXC) 2 Port MIPI to HDMI Bridge
>  
>  maintainers:
>    - Vinod Koul <vkoul at kernel.org>
>  
>  description: |
> -  The LT9611 is a bridge device which converts DSI to HDMI
> +  The LT9611 and LT9611UXC are bridge devices which convert DSI to HDMI
>  
>  properties:
>    compatible:
>      enum:
>        - lontium,lt9611
> +      - lontium,lt9611uxc
>  
>    reg:
>      maxItems: 1
> -- 
> 2.28.0