[RFT 2/4] ARM: dts: exynos: Move fixed clocks under root node in Exynos3250

[Krzysztof Kozlowski]

The fixed clocks are kept under dedicated node fixed-rate-clocks, thus a
fake "reg" was added.  This is not correct with dtschema as fixed-clock
binding does not have a "reg" property:

  arch/arm/boot/dts/exynos3250-artik5-eval.dt.yaml: clock at 0: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'

Signed-off-by: Krzysztof Kozlowski <krzk at kernel.org>
---
 arch/arm/boot/dts/exynos3250.dtsi | 42 +++++++++++++------------------
 1 file changed, 17 insertions(+), 25 deletions(-)

diff --git a/arch/arm/boot/dts/exynos3250.dtsi b/arch/arm/boot/dts/exynos3250.dtsi
index d3fb45a56527..c67c70e46794 100644
--- a/arch/arm/boot/dts/exynos3250.dtsi
+++ b/arch/arm/boot/dts/exynos3250.dtsi
@@ -97,33 +97,25 @@
 		};
 	};
 
-	fixed-rate-clocks {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		xusbxti: clock at 0 {
-			compatible = "fixed-clock";
-			reg = <0>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xusbxti";
-		};
+	xusbxti: clock-0 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xusbxti";
+	};
 
-		xxti: clock at 1 {
-			compatible = "fixed-clock";
-			reg = <1>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xxti";
-		};
+	xxti: clock-1 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xxti";
+	};
 
-		xtcxo: clock at 2 {
-			compatible = "fixed-clock";
-			reg = <2>;
-			clock-frequency = <0>;
-			#clock-cells = <0>;
-			clock-output-names = "xtcxo";
-		};
+	xtcxo: clock-2 {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		#clock-cells = <0>;
+		clock-output-names = "xtcxo";
 	};
 
 	pmu {
-- 
2.17.1