答复: [PATCH v2 6/6] drm/panel: Add Ilitek ILI9341 DBI panel driver

[Paul Cercueil]

Hi Leon,

Le dim. 30 août 2020 à 16:36, 何小龙 (Leon He) 
<Leon.He at unisoc.com> a écrit :
>>  +struct ili9341 {
>>  +       struct drm_panel panel;
>>  +       struct mipi_dsi_device *dsi;
>>  +       const struct ili9341_pdata *pdata;
>>  +
>>  +       struct gpio_desc        *reset_gpiod;
>>  +       u32 rotation;
>>  +};
>>  +
> 
> Hi Paul, you put the mipi_dsi_device inside the struct. I think it 
> maybe not
> a good idea. That means the panel has a MIPI-DSI interface but it 
> doesn't
> have actually.
> 
>>  +static int ili9341_probe(struct mipi_dsi_device *dsi)
>>  +{
>>  +       struct device *dev = &dsi->dev;
>>  +       struct ili9341 *priv;
>>  +       int ret;
>>  +
>>  +       /* See comment for mipi_dbi_spi_init() */
>>  +       if (!dev->coherent_dma_mask) {
>>  +               ret = dma_coerce_mask_and_coherent(dev, 
>> DMA_BIT_MASK(32));
>>  +               if (ret) {
>>  +                       dev_warn(dev, "Failed to set dma mask 
>> %d\n", ret);
>>  +                       return ret;
>>  +               }
>>  +       }
>>  +
>>  +       priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
>>  +       if (!priv)
>>  +               return -ENOMEM;
>>  +
>>  +       mipi_dsi_set_drvdata(dsi, priv);
>>  +       priv->dsi = dsi;
>>  +
>>  +       device_property_read_u32(dev, "rotation", &priv->rotation);
>>  +
>>  +       priv->pdata = device_get_match_data(dev);
>>  +       if (!priv->pdata)
>>  +               return -EINVAL;
>>  +
>>  +       drm_panel_init(&priv->panel, dev, &ili9341_funcs,
>>  +                      DRM_MODE_CONNECTOR_DPI);
>>  +
>>  +       priv->reset_gpiod = devm_gpiod_get(dev, "reset", 
>> GPIOD_OUT_HIGH);
>>  +       if (IS_ERR(priv->reset_gpiod)) {
>>  +               dev_err(dev, "Couldn't get our reset GPIO\n");
>>  +               return PTR_ERR(priv->reset_gpiod);
>>  +       }
>>  +
>>  +       ret = drm_panel_of_backlight(&priv->panel);
>>  +       if (ret < 0) {
>>  +               if (ret != -EPROBE_DEFER)
>>  +                       dev_err(dev, "Failed to get backlight 
>> handle\n");
>>  +               return ret;
>>  +       }
>>  +
>>  +       drm_panel_add(&priv->panel);
>>  +
>>  +       dsi->bus_type = priv->pdata->bus_type;
>>  +       dsi->lanes = priv->pdata->lanes;
>>  +       dsi->format = MIPI_DSI_FMT_RGB565;
>>  +
>>  +       ret = mipi_dsi_attach(dsi);
>>  +       if (ret) {
>>  +               dev_err(dev, "Failed to attach DSI panel\n");
>>  +               goto err_panel_remove;
>>  +       }
>>  +
>>  +       ret = mipi_dsi_maybe_register_tiny_driver(dsi);
>>  +       if (ret) {
>>  +               dev_err(dev, "Failed to init TinyDRM driver\n");
>>  +               goto err_mipi_dsi_detach;
>>  +       }
>>  +
>>  +       return 0;
>>  +
>>  +err_mipi_dsi_detach:
>>  +       mipi_dsi_detach(dsi);
>>  +err_panel_remove:
>>  +       drm_panel_remove(&priv->panel);
>>  +       return ret;
>>  +}
>>  +
>>  +static int ili9341_remove(struct mipi_dsi_device *dsi)
>>  +{
>>  +       struct ili9341 *priv = mipi_dsi_get_drvdata(dsi);
>>  +
>>  +       mipi_dsi_detach(dsi);
>>  +       drm_panel_remove(&priv->panel);
>>  +
>>  +       drm_panel_disable(&priv->panel);
>>  +       drm_panel_unprepare(&priv->panel);
>>  +
>>  +       return 0;
>>  +}
>>  +
>>  +static const struct ili9341_pdata yx240qv29_pdata = {
>>  +       .mode = { DRM_SIMPLE_MODE(240, 320, 37, 49) },
>>  +       .width_mm = 0, // TODO
>>  +       .height_mm = 0, // TODO
>>  +       .bus_type = MIPI_DCS_BUS_TYPE_DBI_SPI_C3,
>>  +       .lanes = 1,
>>  +};
>>  +
>>  +static const struct of_device_id ili9341_of_match[] = {
>>  +       { .compatible = "adafruit,yx240qv29", .data = 
>> &yx240qv29_pdata },
>>  +       { }
>>  +};
>>  +MODULE_DEVICE_TABLE(of, ili9341_of_match);
>>  +
>>  +static struct mipi_dsi_driver ili9341_dsi_driver = {
>>  +       .probe          = ili9341_probe,
>>  +       .remove         = ili9341_remove,
>>  +       .driver = {
>>  +               .name           = "ili9341-dsi",
>>  +               .of_match_table = ili9341_of_match,
>>  +       },
>>  +};
>>  +module_mipi_dsi_driver(ili9341_dsi_driver);
> 
> Again, you treat this driver as a mipi dsi driver but for a MIPI-DBI 
> (I8080/SPI)
> panel device. That will make developers confused.
> 
> Is it possible to just add a mipi_dbi_driver for I8080/SPI interface 
> panel?
> Thanks!

Please read the cover letter, it explains why it's done this way. The 
whole point of this patchset is to merge DSI and DBI frameworks in a 
way that can be maintained.

Cheers,
-Paul