[PATCH v3] drm: rockchip: hdmi: enable higher resolutions than FHD

[Vicente Bergas]

This patch enables a QHD HDMI monitor to work at native resolution.
Tested on a Sapphire board with RK3399 connected to a Q27q-10 monitor at 2560x1440 at 60

Messages like
dwhdmi-rockchip ff940000.hdmi: PHY configuration failed (clock 148501000)
and like
dwhdmi-rockchip ff940000.hdmi: PHY configuration failed (clock 241501000)
were present and still are because of vop_crtc_mode_fixup in
drivers/gpu/drm/rockchip/rockchip_drm_vop.c
but this time the display ends up working fine, just after an extra delay
of a few seconds.

Changes since v2:
Just add the strictly required frequency for backwards compatibility.

Changes since v1:
Use alternative clock rounding code proposed by Doug Anderson

Signed-off-by: Vicente Bergas <vicencb at gmail.com>
---
 drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
index 23de359a1..e1515d55b 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi-rockchip.c
@@ -148,6 +148,10 @@ static const struct dw_hdmi_mpll_config rockchip_mpll_cfg[] = {
 			{ 0x214c, 0x0003},
 			{ 0x4064, 0x0003}
 		},
+	}, {
+		241500000, {
+			{ 0x0040, 0x0003},
+		},
 	}, {
 		~0UL, {
 			{ 0x00a0, 0x000a },
@@ -173,6 +177,8 @@ static const struct dw_hdmi_curr_ctrl rockchip_cur_ctr[] = {
 		146250000, { 0x0038, 0x0038, 0x0038 },
 	}, {
 		148500000, { 0x0000, 0x0038, 0x0038 },
+	}, {
+		241500000, { 0x0000,                },
 	}, {
 		~0UL,      { 0x0000, 0x0000, 0x0000},
 	}
-- 
2.29.2