[PATCH v6 0/8] mainline Plymovent M2M and BAS board

[Oleksij Rempel]

changes v5:
- do more panel-simple.yaml related cleanups

changes v5:
- rebase against latest shawngup/for-next
- add patch to fix checkpatch warning on PLYM2M dts

changes v4:
- add PLYBAS board
- PLYM2M: add touchscreen node
- PLYM2M: add rename led nodes to led-x

changes v3:
- use old style copyright text

changes v2:
- fsl.yaml: reorder ply,plym2m
- imx6dl-plym2m.dts: use hyphen instead of underscore in phy-clock

Oleksij Rempel (8):
  dt-bindings: display: simple: fix alphabetical order for EDT
    compatibles
  dt-bindings: display: simple: add EDT compatibles already supported by
    the driver
  dt-bindings: display: simple: Add Kyocera tcg070wvlq panel
  dt-bindings: vendor-prefixes: Add an entry for Plymovent
  dt-bindings: arm: fsl: add Plymovent M2M board
  ARM: dts: add Plymovent M2M board
  dt-bindings: arm: fsl: add Plymovent BAS board
  ARM: dts: add Plymovent BAS board

 .../devicetree/bindings/arm/fsl.yaml          |   2 +
 .../bindings/display/panel/panel-simple.yaml  |  20 +-
 .../devicetree/bindings/vendor-prefixes.yaml  |   2 +
 arch/arm/boot/dts/Makefile                    |   2 +
 arch/arm/boot/dts/imx6dl-plybas.dts           | 394 ++++++++++++++++
 arch/arm/boot/dts/imx6dl-plym2m.dts           | 446 ++++++++++++++++++
 6 files changed, 857 insertions(+), 9 deletions(-)
 create mode 100644 arch/arm/boot/dts/imx6dl-plybas.dts
 create mode 100644 arch/arm/boot/dts/imx6dl-plym2m.dts

-- 
2.29.2