[PATCH] drm/vkms: Add setup and testing information

[Sumera Priyadarsini]

Update the vkms documentation to contain steps to:

 - setup the vkms driver
 - run tests using igt

Signed-off-by: Sumera Priyadarsini <sylphrenadin at gmail.com>
---
 Documentation/gpu/vkms.rst | 47 ++++++++++++++++++++++++++++++++++++++
 1 file changed, 47 insertions(+)

diff --git a/Documentation/gpu/vkms.rst b/Documentation/gpu/vkms.rst
index 13bab1d93bb3..d6782174d23f 100644
--- a/Documentation/gpu/vkms.rst
+++ b/Documentation/gpu/vkms.rst
@@ -7,6 +7,53 @@
 .. kernel-doc:: drivers/gpu/drm/vkms/vkms_drv.c
    :doc: vkms (Virtual Kernel Modesetting)
 
+SETUP
+=====
+
+The VKMS driver can be setup with the following steps:
+
+To check if VKMS is loaded, run::
+
+  lsmod | grep vkms
+
+This should list the VKMS driver. If no output is obtained, then
+you need to enable and/or load the VKMS driver.
+Ensure that the VKMS driver has been set as a loadable module in your
+kernel config file. The following line should be present in the .config
+file in your kernel root::
+
+  CONFIG_DRM_VKMS=m
+
+Compile and build the kernel for the changes to get reflected.
+If your existing config already has VKMS available as a loadable module,
+then there is no need to build the kernel again.
+Now, to load the driver, use::
+
+  sudo modprobe vkms
+
+On running the lsmod command now, the VKMS driver will appear listed.
+You can also observe the driver being loaded in the dmesg logs.
+
+To disable the driver, use ::
+
+  sudo modprobe -r vkms
+
+TESTING WITH IGT
+================
+
+The IGT GPU Tools is a test suite used specifically for debugging and
+development of the DRM drivers.
+The IGT Tools can be installed from
+`here <https://gitlab.freedesktop.org/drm/igt-gpu-tools>`_ .
+Once you have installed IGT, you can run tests using::
+
+  ./scripts/run-tests.sh -t <name of test>
+
+For example, to test the functionality of the igt_draw library,
+we can run the kms_draw_crc test::
+
+  ./scripts/run-tests.sh -t kms_draw_crc
+
 TODO
 ====
 
-- 
2.25.1