[RFC PATCH] drm/panel: Make backlight attachment lazy

Thu Dec 10 16:44:41 UTC 2020

On Thu, Dec 10, 2020 at 11:15:38AM +0100, Daniel Vetter wrote:
> On Wed, Dec 09, 2020 at 02:28:18PM -0600, Bjorn Andersson wrote:
> > On Tue 08 Dec 17:52 CST 2020, Daniel Vetter wrote:
> > 
> > > On Tue, Dec 08, 2020 at 04:02:16PM -0600, Bjorn Andersson wrote:
> > > > On Tue 08 Dec 06:47 CST 2020, Thierry Reding wrote:
> > > > 
> > > > > On Mon, Dec 07, 2020 at 10:44:46PM -0600, Bjorn Andersson wrote:
> > > > > > Some bridge chips, such as the TI SN65DSI86 DSI/eDP bridge, provides
> > > > > > means of generating a PWM signal for backlight control of the attached
> > > > > > panel. The provided PWM chip is typically controlled by the
> > > > > > pwm-backlight driver, which if tied to the panel will provide DPMS.
> > > > > > 
> > > > > > But with the current implementation the panel will refuse to probe
> > > > > > because the bridge driver has yet to probe and register the PWM chip,
> > > > > > and the bridge driver will refuse to probe because it's unable to find
> > > > > > the panel.
> > > > > 
> > > > > What you're describing is basically a circular dependency. Can't we get
> > > > > rid of that in some other way? Why exactly does the bridge driver refuse
> > > > > to probe if the panel can't be found?
> > > > > 
> > > > > In other words, I see how the bridge would /use/ the panel in that it
> > > > > forward a video stream to it. But how does the panel /use/ the bridge?
> > > > > 
> > > > 
> > > > Yes, this is indeed a circular dependency between the components.
> > > > 
> > > > The involved parts are:
> > > > * the bridge driver that implements the PWM chip probe defers on
> > > >   drm_of_find_panel_or_bridge() failing to find the panel.
> > > > * the pwm-backlight driver that consumes the PWM channel probe defer
> > > >   because the pwm_chip was not registered by the bridge.
> > > > * the panel that uses the backlight for DPMS purposes probe defer
> > > >   because drm_panel_of_backlight() fails to find the pwm-backlight.
> > > > 
> > > > I looked at means of postponing drm_of_find_panel_or_bridge() to
> > > > drm_bridge_funcs->attach(), but at that time "deferral" would be fatal.
> > > > I looked at registering the pwm_chip earlier, but that would depend on a
> > > > guarantee of the pwm-backlight and panel driver to probe concurrently.
> > > > And the current solution of not tying the backlight to the panel means
> > > > that when userspace decides to DPMS the display the backlight stays on.
> > > > 
> > > > 
> > > > The proposed solution (hack?) means that DPMS operations happening
> > > > before the pwm-backlight has probed will be missed, so it's not perfect.
> > > > It does however allow the backlight on my laptop to turn off, which is a
> > > > big improvement.
> > > > 
> > > > But I'm certainly welcome to suggestions.
> > > 
> > > Entirely hand-waving, why doesn't the following work:
> > > 
> > > 1. driver for the platform device which is the bridge loads
> > > 2. that platform driver registers the pwm
> > > 3. it registers some magic for later on (more below)
> > > 4. panel driver has deferred loading until step 2 happened
> > > 5. panel driver registers drm_panel
> > > 6. the magic from step 3 picks up (after having been deferred for a few
> > > times probably) grabs the panel, and sets up the actual drm_bridge driver
> > > 
> > > Everyone happy, or not? From the description it looks like the problem
> > > that the pwm that we need for the backlight is tied to the same driver as
> > > the drm_bridge, and always torn down too if the drm_bridge setup fails
> > > somehow for a reason. And that reason is the circular dependency this
> > > creates.
> > > 
> > > Now for the magic in step 3, there's options:
> > > - change DT to split out that pwm as a separate platform_device, that way
> > >   bridge and panel can load indepedently (hopefully)
> > > 
> > 
> > This is an i2c device, so describing it multiple times would mean we
> > have multiple devices with the same address...
> > 
> > > - convert bridge to a multi-function device (mfd), essentially a way to
> > >   instantiate more devices with their drivers at runtime. Then the actual
> > >   pwm and drm_bridge parts of your bridge driver bind against those
> > >   sub-functions, and can defer indepedently
> > > 
> > 
> > But, this sounds reasonable and would rely on the existing probe
> > deferral logic and if there's ever any improvements in this area we
> > would directly benefit from it.
> > 
> > > - we could create a callback/wait function for "pls wait for any panel to
> > >   show up". Then your bridge driver could launch a work_struct with that
> > >   wait function, which will do the bridge setup once the panel has shown
> > >   up. The pwm will be registered right away. It's essentially hand-rolling
> > >   EPROBE_DEFERRED for work_struct in drm/panel. Maybe we might even have
> > >   that exported from the driver core, e.g.
> > > 
> > > register_bridge_fn(struct work *)
> > > {
> > > 	do_wait_probe_defer();
> > > 	panel = drm_of_find_panel_or_bridge();
> > > 	if (!panel) {
> > > 		schedule_work(); /* want to restart the work so it can be stopped on driver unload */
> > > 		return;
> > > 	}
> > > 
> > > 	/* we have the panel now, register drm_bridge */
> > > }
> > > 
> > > - cobble something together with component.c, but that's more for
> > >   collecting unrelated struct device into a logical one than splitting it
> > >   up more.
> > > 
> > > tldr; I think you can split this loop here at the bridge by untangling the
> > > pwm from the drm_bridge part sufficiently.
> > 
> > Yes, it seems like a reasonable path forward. But I wanted some input
> > before refactoring the whole thing.
> 
> Yeah it's unfortunately a bit of work. But I think it's the proper
> approach since EPROBE_DEFERRED is fundamentally linked to struct device
> and bound drivers. So we do need a struct device for every part in our
> dependency graph to make sure we can resolve the dependencies all
> correctly with reprobing.

Can we not turn things around and make the bridge driver independent of
the panel? To me it sounds like these loosely follow a hierarchy where
it makes sense to probe the bridge first, without any dependency on the
panel that's being used. I think this makes sense because this example
shows that panels may depend on resources provided by the bridge. In
this case it's a backlight, but I could also imagine the bridge
providing some sort of I2C bus that the panel driver may need to use in
order to query the panel's EDID.

The way I imagine that this would work is that the panel would probe
separately from the bridge driver but use the OF graph to look up the
bridge that has the resources (backlight, I2C bus, ...) that it needs to
proceed. As long as that bridge has not been probed, the panel would
need to defer, which is the standard way that provider/consumer pairs
work. Once the bridge has probed, the panel can also proceed to probe
because it can now find the necessary resources.

The only missing thing that I don't think we have right now is a way for
the panel to then register with its parent bridge, but that should be
fairly easy to add. I suspect this might get a bit tricky around the
connector state paths because we can now get into a situation where the
connector can have a complete bridge path set up but may be missing the
panel (which I think in the current model can't happen because the
bridge always relies on the panel being there, although it sounds like
it could happen with Daniel's proposal as well). But that ultimately is
not very different from how we deal with monitors on more standard
interfaces like HDMI or DP where we emit a hotplug event when the
monitor becomes available, so perhaps that infrastructure could be
reused for this.

Thierry
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <https://lists.freedesktop.org/archives/dri-devel/attachments/20201210/ec7c81c8/attachment.sig>