[PATCH v6 5/9] drm/vc4: hdmi: Create a custom connector state
Dave Stevenson
dave.stevenson at raspberrypi.com
Tue Dec 15 11:02:28 UTC 2020
Hi Maxime
On Thu, 10 Dec 2020 at 14:23, Maxime Ripard <maxime at cerno.tech> wrote:
>
> When run with a higher bpc than 8, the clock of the HDMI controller needs
> to be adjusted. Let's create a connector state that will be used at
> atomic_check and atomic_enable to compute and store the clock rate
> associated to the state.
>
> Acked-by: Thomas Zimmermann <tzimmermann at suse.de>
> Reviewed-by: Dave Stevenson <dave.stevenson at raspberrypi.com>
> Signed-off-by: Maxime Ripard <maxime at cerno.tech>
> ---
> drivers/gpu/drm/vc4/vc4_hdmi.c | 33 ++++++++++++++++++++++++++++++---
> drivers/gpu/drm/vc4/vc4_hdmi.h | 10 ++++++++++
> 2 files changed, 40 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
> index 61039cc89d9d..8978df3f0ca4 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.c
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
> @@ -170,10 +170,37 @@ static int vc4_hdmi_connector_get_modes(struct drm_connector *connector)
>
> static void vc4_hdmi_connector_reset(struct drm_connector *connector)
> {
> - drm_atomic_helper_connector_reset(connector);
> + struct vc4_hdmi_connector_state *old_state =
> + conn_state_to_vc4_hdmi_conn_state(connector->state);
> + struct vc4_hdmi_connector_state *new_state =
> + kzalloc(sizeof(*conn_state), GFP_KERNEL);
>
> if (connector->state)
> - drm_atomic_helper_connector_tv_reset(connector);
> + __drm_atomic_helper_connector_destroy_state(connector->state);
> +
> + kfree(old_state);
> +
> + if (!new_state)
> + return;
This has changed since v5 that I added my R-B to.
So we no longer call __drm_atomic_helper_connector_reset should the
kzalloc fail. Doesn't that mean connector->state is still set to
old_state? Except we've called kfree on that and it's therefore
invalid.
Calling __drm_atomic_helper_connector_reset unconditionally is fine as
it checks for the new pointer being NULL before dereferencing, but
always assigns it to connector->state.
Calling drm_atomic_helper_connector_tv_reset when connector->state =
NULL isn't safe.
> + __drm_atomic_helper_connector_reset(connector, &new_state->base);
Put the if (!new_state) return; here?
Patch 9/9 can set the max_bpc and max_bpc_requested field here too.
Dave
> + drm_atomic_helper_connector_tv_reset(connector);
> +}
> +
> +static struct drm_connector_state *
> +vc4_hdmi_connector_duplicate_state(struct drm_connector *connector)
> +{
> + struct drm_connector_state *conn_state = connector->state;
> + struct vc4_hdmi_connector_state *vc4_state = conn_state_to_vc4_hdmi_conn_state(conn_state);
> + struct vc4_hdmi_connector_state *new_state;
> +
> + new_state = kzalloc(sizeof(*new_state), GFP_KERNEL);
> + if (!new_state)
> + return NULL;
> +
> + __drm_atomic_helper_connector_duplicate_state(connector, &new_state->base);
> +
> + return &new_state->base;
> }
>
> static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
> @@ -181,7 +208,7 @@ static const struct drm_connector_funcs vc4_hdmi_connector_funcs = {
> .fill_modes = drm_helper_probe_single_connector_modes,
> .destroy = vc4_hdmi_connector_destroy,
> .reset = vc4_hdmi_connector_reset,
> - .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
> + .atomic_duplicate_state = vc4_hdmi_connector_duplicate_state,
> .atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
> };
>
> diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.h b/drivers/gpu/drm/vc4/vc4_hdmi.h
> index 0526a9cf608a..2cf5362052e2 100644
> --- a/drivers/gpu/drm/vc4/vc4_hdmi.h
> +++ b/drivers/gpu/drm/vc4/vc4_hdmi.h
> @@ -180,6 +180,16 @@ encoder_to_vc4_hdmi(struct drm_encoder *encoder)
> return container_of(_encoder, struct vc4_hdmi, encoder);
> }
>
> +struct vc4_hdmi_connector_state {
> + struct drm_connector_state base;
> +};
> +
> +static inline struct vc4_hdmi_connector_state *
> +conn_state_to_vc4_hdmi_conn_state(struct drm_connector_state *conn_state)
> +{
> + return container_of(conn_state, struct vc4_hdmi_connector_state, base);
> +}
> +
> void vc4_hdmi_phy_init(struct vc4_hdmi *vc4_hdmi,
> struct drm_display_mode *mode);
> void vc4_hdmi_phy_disable(struct vc4_hdmi *vc4_hdmi);
> --
> 2.28.0
>
More information about the dri-devel
mailing list