[PATCH v5 5/6] backlight: rt4831: Adds support for Richtek RT4831 backlight

cy_huang u0084500 at gmail.com
Thu Dec 17 15:00:43 UTC 2020


From: ChiYuan Huang <cy_huang at richtek.com>

Adds support for Richtek RT4831 backlight.

Signed-off-by: ChiYuan Huang <cy_huang at richtek.com>
---
 drivers/video/backlight/Kconfig            |   8 ++
 drivers/video/backlight/Makefile           |   1 +
 drivers/video/backlight/rt4831-backlight.c | 219 +++++++++++++++++++++++++++++
 3 files changed, 228 insertions(+)
 create mode 100644 drivers/video/backlight/rt4831-backlight.c

diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index d83c87b..666bdb0 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -289,6 +289,14 @@ config BACKLIGHT_QCOM_WLED
 	  If you have the Qualcomm PMIC, say Y to enable a driver for the
 	  WLED block. Currently it supports PM8941 and PMI8998.
 
+config BACKLIGHT_RT4831
+	tristate "Richtek RT4831 Backlight Driver"
+	depends on MFD_RT4831
+	help
+	  This enables support for Richtek RT4831 Backlight driver.
+	  It's commont used to drive the display WLED. There're four channels
+	  inisde, and each channel can provide up to 30mA current.
+
 config BACKLIGHT_SAHARA
 	tristate "Tabletkiosk Sahara Touch-iT Backlight Driver"
 	depends on X86
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 685f3f1..cae2c83 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -49,6 +49,7 @@ obj-$(CONFIG_BACKLIGHT_PANDORA)		+= pandora_bl.o
 obj-$(CONFIG_BACKLIGHT_PCF50633)	+= pcf50633-backlight.o
 obj-$(CONFIG_BACKLIGHT_PWM)		+= pwm_bl.o
 obj-$(CONFIG_BACKLIGHT_QCOM_WLED)	+= qcom-wled.o
+obj-$(CONFIG_BACKLIGHT_RT4831)		+= rt4831-backlight.o
 obj-$(CONFIG_BACKLIGHT_SAHARA)		+= kb3886_bl.o
 obj-$(CONFIG_BACKLIGHT_SKY81452)	+= sky81452-backlight.o
 obj-$(CONFIG_BACKLIGHT_TOSA)		+= tosa_bl.o
diff --git a/drivers/video/backlight/rt4831-backlight.c b/drivers/video/backlight/rt4831-backlight.c
new file mode 100644
index 00000000..816c4d6
--- /dev/null
+++ b/drivers/video/backlight/rt4831-backlight.c
@@ -0,0 +1,219 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <dt-bindings/leds/rt4831-backlight.h>
+#include <linux/backlight.h>
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+#define RT4831_REG_BLCFG	0x02
+#define RT4831_REG_BLDIML	0x04
+#define RT4831_REG_ENABLE	0x08
+
+#define BL_MAX_BRIGHTNESS	2048
+
+#define RT4831_BLOVP_MASK	GENMASK(7, 5)
+#define RT4831_BLOVP_SHIFT	5
+#define RT4831_BLPWMEN_MASK	BIT(0)
+#define RT4831_BLEN_MASK	BIT(4)
+#define RT4831_BLCH_MASK	GENMASK(3, 0)
+#define RT4831_BLDIML_MASK	GENMASK(2, 0)
+#define RT4831_BLDIMH_MASK	GENMASK(10, 3)
+#define RT4831_BLDIMH_SHIFT	3
+
+struct rt4831_priv {
+	struct regmap *regmap;
+	struct mutex lock;
+	struct backlight_device *bl;
+};
+
+static int rt4831_bl_update_status(struct backlight_device *bl_dev)
+{
+	struct rt4831_priv *priv = bl_get_data(bl_dev);
+	int brightness = backlight_get_brightness(bl_dev);
+	unsigned int enable = brightness ? RT4831_BLEN_MASK : 0;
+	u8 v[2];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	if (brightness) {
+		v[0] = (brightness - 1) & RT4831_BLDIML_MASK;
+		v[1] = ((brightness - 1) & RT4831_BLDIMH_MASK) >> RT4831_BLDIMH_SHIFT;
+
+		ret = regmap_raw_write(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
+		if (ret)
+			goto unlock;
+	}
+
+	ret = regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLEN_MASK, enable);
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static int rt4831_bl_get_brightness(struct backlight_device *bl_dev)
+{
+	struct rt4831_priv *priv = bl_get_data(bl_dev);
+	unsigned int val;
+	u8 v[2];
+	int ret;
+
+	mutex_lock(&priv->lock);
+
+	ret = regmap_read(priv->regmap, RT4831_REG_ENABLE, &val);
+	if (ret)
+		return ret;
+
+	if (!(val & RT4831_BLEN_MASK)) {
+		ret = 0;
+		goto unlock;
+	}
+
+	ret = regmap_raw_read(priv->regmap, RT4831_REG_BLDIML, v, sizeof(v));
+	if (ret)
+		goto unlock;
+
+	ret = (v[1] << RT4831_BLDIMH_SHIFT) + (v[0] & RT4831_BLDIML_MASK) + 1;
+
+unlock:
+	mutex_unlock(&priv->lock);
+	return ret;
+}
+
+static const struct backlight_ops rt4831_bl_ops = {
+	.options = BL_CORE_SUSPENDRESUME,
+	.update_status = rt4831_bl_update_status,
+	.get_brightness = rt4831_bl_get_brightness,
+};
+
+static int rt4831_init_device_properties(struct rt4831_priv *priv, struct device *dev,
+					  struct backlight_properties *bl_props)
+{
+	u8 propval;
+	u32 brightness;
+	unsigned int val = 0;
+	int ret;
+
+	/* common properties */
+	ret = device_property_read_u32(dev, "max-brightness", &brightness);
+	if (ret) {
+		dev_warn(dev, "max-brightness DT property missing, use HW max as default\n");
+		brightness = BL_MAX_BRIGHTNESS;
+	}
+
+	bl_props->max_brightness = min_t(u32, brightness, BL_MAX_BRIGHTNESS);
+
+	ret = device_property_read_u32(dev, "default-brightness", &brightness);
+	if (ret) {
+		dev_warn(dev, "default-brightness DT property missing, use max limit as default\n");
+		brightness = bl_props->max_brightness;
+	}
+
+	bl_props->brightness = min_t(u32, brightness, bl_props->max_brightness);
+
+	/* vendor properties */
+	if (device_property_read_bool(dev, "richtek,pwm-enable"))
+		val = RT4831_BLPWMEN_MASK;
+
+	ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLPWMEN_MASK, val);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u8(dev, "richtek,bled-ovp-sel", &propval);
+	if (ret) {
+		dev_warn(dev, "richtek,bled-ovp-sel DT property missing, use default 21V\n");
+		propval = RT4831_BLOVPLVL_21V;
+	}
+
+	propval = min_t(u8, propval, RT4831_BLOVPLVL_29V);
+	ret = regmap_update_bits(priv->regmap, RT4831_REG_BLCFG, RT4831_BLOVP_MASK,
+				 propval << RT4831_BLOVP_SHIFT);
+	if (ret)
+		return ret;
+
+	ret = device_property_read_u8(dev, "richtek,channel-use", &propval);
+	if (ret) {
+		dev_err(dev, "richtek,channel-use DT property missing\n");
+		return ret;
+	}
+
+	if (!(propval & RT4831_BLCH_MASK)) {
+		dev_err(dev, "No channel specified\n");
+		return -EINVAL;
+	}
+
+	return regmap_update_bits(priv->regmap, RT4831_REG_ENABLE, RT4831_BLCH_MASK, propval);
+}
+
+static int rt4831_bl_probe(struct platform_device *pdev)
+{
+	struct rt4831_priv *priv;
+	struct backlight_properties bl_props = { .type = BACKLIGHT_RAW, };
+	int ret;
+
+	priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	mutex_init(&priv->lock);
+
+	priv->regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (IS_ERR(priv->regmap)) {
+		dev_err(&pdev->dev, "Failed to init regmap\n");
+		return PTR_ERR(priv->regmap);
+	}
+
+	ret = rt4831_init_device_properties(priv, &pdev->dev, &bl_props);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to init device properties\n");
+		return ret;
+	}
+
+	priv->bl = devm_backlight_device_register(&pdev->dev, pdev->name, &pdev->dev, priv,
+						  &rt4831_bl_ops, &bl_props);
+	if (IS_ERR(priv->bl)) {
+		dev_err(&pdev->dev, "Failed to register backlight\n");
+		return PTR_ERR(priv->bl);
+	}
+
+	backlight_update_status(priv->bl);
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+}
+
+static int rt4831_bl_remove(struct platform_device *pdev)
+{
+	struct rt4831_priv *priv = platform_get_drvdata(pdev);
+	struct backlight_device *bl_dev = priv->bl;
+
+	bl_dev->props.brightness = 0;
+	backlight_update_status(priv->bl);
+
+	return 0;
+}
+
+static const struct of_device_id __maybe_unused rt4831_bl_of_match[] = {
+	{ .compatible = "richtek,rt4831-backlight", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rt4831_bl_of_match);
+
+static struct platform_driver rt4831_bl_driver = {
+	.driver = {
+		.name = "rt4831-backlight",
+		.of_match_table = rt4831_bl_of_match,
+	},
+	.probe = rt4831_bl_probe,
+	.remove = rt4831_bl_remove,
+};
+module_platform_driver(rt4831_bl_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang at richtek.com>");
+MODULE_LICENSE("GPL v2");
-- 
2.7.4



More information about the dri-devel mailing list