[PATCH] drm/stm: ltdc: enable/disable depends on encoder

Benjamin Gaignard benjamin.gaignard at linaro.org
Tue Feb 4 10:56:45 UTC 2020


Le jeu. 23 janv. 2020 à 10:47, Philippe CORNU <philippe.cornu at st.com> a écrit :
>
> Dear Yannick,
> Thank you for your patch,
>
> Acked-by: Philippe Cornu <philippe.cornu at st.com>
>
> Philippe :-)
>
> On 1/20/20 2:46 PM, Yannick Fertre wrote:
> > From: Yannick Fertré <yannick.fertre at st.com>
> >
> > When connected to a dsi host, the ltdc display controller
> > must send frames only after the end of the dsi panel
> > initialization to avoid errors when the dsi host sends
> > commands to the dsi panel (dsi px fifo full).
> > To avoid this issue, the display controller must be
> > enabled/disabled when the encoder is enabled/disabled.
> >

Applied on drm-misc-next.

Thanks
Benjamin

> > Signed-off-by: Yannick Fertré <yannick.fertre at st.com>
> > ---
> >   drivers/gpu/drm/stm/ltdc.c | 14 ++++++++------
> >   1 file changed, 8 insertions(+), 6 deletions(-)
> >
> > diff --git a/drivers/gpu/drm/stm/ltdc.c b/drivers/gpu/drm/stm/ltdc.c
> > index 719dfc5..9ef125d 100644
> > --- a/drivers/gpu/drm/stm/ltdc.c
> > +++ b/drivers/gpu/drm/stm/ltdc.c
> > @@ -437,9 +437,6 @@ static void ltdc_crtc_atomic_enable(struct drm_crtc *crtc,
> >       /* Commit shadow registers = update planes at next vblank */
> >       reg_set(ldev->regs, LTDC_SRCR, SRCR_VBR);
> >
> > -     /* Enable LTDC */
> > -     reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
> > -
> >       drm_crtc_vblank_on(crtc);
> >   }
> >
> > @@ -453,9 +450,6 @@ static void ltdc_crtc_atomic_disable(struct drm_crtc *crtc,
> >
> >       drm_crtc_vblank_off(crtc);
> >
> > -     /* disable LTDC */
> > -     reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
> > -
> >       /* disable IRQ */
> >       reg_clear(ldev->regs, LTDC_IER, IER_RRIE | IER_FUIE | IER_TERRIE);
> >
> > @@ -1058,9 +1052,13 @@ static const struct drm_encoder_funcs ltdc_encoder_funcs = {
> >   static void ltdc_encoder_disable(struct drm_encoder *encoder)
> >   {
> >       struct drm_device *ddev = encoder->dev;
> > +     struct ltdc_device *ldev = ddev->dev_private;
> >
> >       DRM_DEBUG_DRIVER("\n");
> >
> > +     /* Disable LTDC */
> > +     reg_clear(ldev->regs, LTDC_GCR, GCR_LTDCEN);
> > +
> >       /* Set to sleep state the pinctrl whatever type of encoder */
> >       pinctrl_pm_select_sleep_state(ddev->dev);
> >   }
> > @@ -1068,6 +1066,7 @@ static void ltdc_encoder_disable(struct drm_encoder *encoder)
> >   static void ltdc_encoder_enable(struct drm_encoder *encoder)
> >   {
> >       struct drm_device *ddev = encoder->dev;
> > +     struct ltdc_device *ldev = ddev->dev_private;
> >
> >       DRM_DEBUG_DRIVER("\n");
> >
> > @@ -1078,6 +1077,9 @@ static void ltdc_encoder_enable(struct drm_encoder *encoder)
> >        */
> >       if (encoder->encoder_type == DRM_MODE_ENCODER_DPI)
> >               pinctrl_pm_select_default_state(ddev->dev);
> > +
> > +     /* Enable LTDC */
> > +     reg_set(ldev->regs, LTDC_GCR, GCR_LTDCEN);
> >   }
> >
> >   static const struct drm_encoder_helper_funcs ltdc_encoder_helper_funcs = {
> >
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel


More information about the dri-devel mailing list