[PATCH v4 3/3] arm64: dts: qcom: sc7180: Add A618 gpu dt blob

Sharat Masetty smasetty at codeaurora.org
Wed Feb 5 07:01:37 UTC 2020


This patch adds the required dt nodes and properties
to enabled A618 GPU.

Signed-off-by: Sharat Masetty <smasetty at codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 102 +++++++++++++++++++++++++++++++++++
 1 file changed, 102 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index f3fcc5c..63fff15 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1043,6 +1043,108 @@
 			};
 		};
 
+		gpu: gpu at 5000000 {
+			compatible = "qcom,adreno-618.0", "qcom,adreno";
+			#stream-id-cells = <16>;
+			reg = <0 0x05000000 0 0x40000>, <0 0x0509e000 0 0x1000>,
+				<0 0x05061000 0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory", "cx_mem", "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-800000000 {
+					opp-hz = /bits/ 64 <800000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+				};
+
+				opp-650000000 {
+					opp-hz = /bits/ 64 <650000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+				};
+
+				opp-565000000 {
+					opp-hz = /bits/ 64 <565000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+				};
+
+				opp-430000000 {
+					opp-hz = /bits/ 64 <430000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				};
+
+				opp-355000000 {
+					opp-hz = /bits/ 64 <355000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+
+				opp-267000000 {
+					opp-hz = /bits/ 64 <267000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				};
+
+				opp-180000000 {
+					opp-hz = /bits/ 64 <180000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
+		adreno_smmu: iommu at 5040000 {
+			compatible = "qcom,sc7180-smmu-v2", "qcom,smmu-v2";
+			reg = <0 0x05040000 0 0x10000>;
+			#iommu-cells = <1>;
+			#global-interrupts = <2>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 231 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 364 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 365 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 366 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 367 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 368 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 369 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 370 IRQ_TYPE_EDGE_RISING>,
+					<GIC_SPI 371 IRQ_TYPE_EDGE_RISING>;
+			clocks = <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				<&gcc GCC_GPU_CFG_AHB_CLK>,
+				<&gcc GCC_DDRSS_GPU_AXI_CLK>;
+
+			clock-names = "bus", "iface", "mem_iface_clk";
+			power-domains = <&gpucc CX_GDSC>;
+		};
+
+		gmu: gmu at 506a000 {
+			compatible="qcom,adreno-gmu-618.0", "qcom,adreno-gmu";
+			reg = <0 0x0506a000 0 0x31000>, <0 0x0b290000 0 0x10000>,
+				<0 0x0b490000 0 0x10000>;
+			reg-names = "gmu", "gmu_pdc", "gmu_pdc_seq";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				   <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+			       <&gpucc GPU_CC_CXO_CLK>,
+			       <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+			       <&gcc GCC_GPU_MEMNOC_GFX_CLK>;
+			clock-names = "gmu", "cxo", "axi", "memnoc";
+			power-domains = <&gpucc CX_GDSC>, <&gpucc GX_GDSC>;
+			power-domain-names = "cx", "gx";
+			iommus = <&adreno_smmu 5>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller at 5090000 {
 			compatible = "qcom,sc7180-gpucc";
 			reg = <0 0x05090000 0 0x9000>;
-- 
1.9.1


More information about the dri-devel mailing list