[PATCH v4 1/3] dt-bindings: drm/bridge: Document Cadence MHDP bridge bindings.

Yuti Amonkar yamonkar at cadence.com
Thu Feb 6 06:29:46 UTC 2020


Document the bindings used for the Cadence MHDP DPI/DP bridge in
yaml format.

Signed-off-by: Yuti Amonkar <yamonkar at cadence.com>
Reviewed-by: Rob Herring <robh at kernel.org>
---
 .../bindings/display/bridge/cdns,mhdp.yaml    | 125 ++++++++++++++++++
 1 file changed, 125 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml

diff --git a/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
new file mode 100644
index 000000000000..e7f84ed1d2da
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/bridge/cdns,mhdp.yaml
@@ -0,0 +1,125 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/bridge/cdns,mhdp.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Cadence MHDP bridge
+
+maintainers:
+  - Swapnil Jakhade <sjakhade at cadence.com>
+  - Yuti Amonkar <yamonkar at cadence.com>
+
+properties:
+  compatible:
+    enum:
+      - cdns,mhdp8546
+      - ti,j721e-mhdp8546
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    items:
+      - description:
+          Register block of mhdptx apb registers upto PHY mapped area(AUX_CONFIG_P).
+          The AUX and PMA registers are mapped to associated phy driver.
+      - description:
+          Register block for DSS_EDP0_INTG_CFG_VP registers in case of TI J7 SoCs.
+
+  reg-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      - const: mhdptx
+      - const: j721e-intg
+
+  clocks:
+    maxItems: 1
+    description:
+      DP bridge clock, it's used by the IP to know how to translate a number of
+      clock cycles into a time (which is used to comply with DP standard timings
+      and delays).
+
+  phys:
+    description: Phandle to the DisplyPort phy.
+
+  ports:
+    type: object
+    description:
+      Ports as described in Documentation/devicetree/bindings/graph.txt
+
+    properties:
+      '#address-cells':
+        const: 1
+
+      '#size-cells':
+        const: 0
+
+      port at 0:
+        type: object
+        description:
+          input port representing the DP bridge input
+
+      port at 1:
+        type: object
+        description:
+          output port representing the DP bridge output.
+
+    required:
+      - port at 0
+      - port at 1
+      - '#address-cells'
+      - '#size-cells'
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,j721e-mhdp8546
+    then:
+      properties:
+        reg:
+          minItems: 2
+        reg-names:
+          minItems: 2
+
+required:
+  - compatible
+  - clocks
+  - reg
+  - reg-names
+  - phys
+  - ports
+
+additionalProperties: false
+
+examples:
+  - |
+    mhdp: dp-bridge at f0fb000000 {
+        compatible = "cdns,mhdp8546";
+        reg = <0xf0 0xfb000000 0x0 0x1000000>;
+        reg-names = "mhdptx";
+        clocks = <&mhdp_clock>;
+        phys = <&dp_phy>;
+
+        ports {
+              #address-cells = <1>;
+              #size-cells = <0>;
+
+              port at 0 {
+                     reg = <0>;
+                     dp_bridge_input: endpoint {
+                        remote-endpoint = <&xxx_dpi_output>;
+                     };
+              };
+
+              port at 1 {
+                     reg = <1>;
+                     dp_bridge_output: endpoint {
+                        remote-endpoint = <&xxx_dp_connector_input>;
+                     };
+              };
+        };
+    };
+...
-- 
2.20.1



More information about the dri-devel mailing list