[PATCH] drm/mediatek: Ensure the cursor plane is on top of other overlays

Evan Benn evanbenn at google.com
Thu Feb 6 07:04:02 UTC 2020


Apologies if I have formatted this wrong / sent to the wrong place!

The patch posted had an issue, another place in the driver was
assuming planes[1] still referred to the cursor.
Now search for the cursor before sending (as the plane cannot be
hard-coded, some devices have different numbers of planes).

Thanks

Evan Benn


On Thu, Feb 6, 2020 at 6:00 PM <evanbenn at google.com> wrote:
>
> From: Sean Paul <seanpaul at chromium.org>
>
> Currently the cursor is placed on the first overlay plane, which means
> it will be at the bottom of the stack when the hw does the compositing
> with anything other than primary plane. Since mtk doesn't support plane
> zpos, change the cursor location to the top-most plane.
>
> Signed-off-by: Evan Benn <evanbenn at chromium.org>
> Signed-off-by: Sean Paul <seanpaul at chromium.org>
> ---
>  drivers/gpu/drm/mediatek/mtk_drm_crtc.c | 29 +++++++++++++++++--------
>  1 file changed, 20 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> index 7b392d6c71cc..d4078c2089e0 100644
> --- a/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> +++ b/drivers/gpu/drm/mediatek/mtk_drm_crtc.c
> @@ -658,10 +658,21 @@ static const struct drm_crtc_helper_funcs mtk_crtc_helper_funcs = {
>
>  static int mtk_drm_crtc_init(struct drm_device *drm,
>                              struct mtk_drm_crtc *mtk_crtc,
> -                            struct drm_plane *primary,
> -                            struct drm_plane *cursor, unsigned int pipe)
> +                            unsigned int pipe)
>  {
> -       int ret;
> +       int i, ret;
> +
> +       struct drm_plane *primary = NULL;
> +       struct drm_plane *cursor = NULL;
> +
> +       for (i = 0; i < mtk_crtc->layer_nr; ++i) {
> +               if (!primary && mtk_crtc->planes[i].type ==
> +                               DRM_PLANE_TYPE_PRIMARY)
> +                       primary = &mtk_crtc->planes[i];
> +               if (!cursor && mtk_crtc->planes[i].type ==
> +                               DRM_PLANE_TYPE_CURSOR)
> +                       cursor = &mtk_crtc->planes[i];
> +       }
>
>         ret = drm_crtc_init_with_planes(drm, &mtk_crtc->base, primary, cursor,
>                                         &mtk_crtc_funcs, NULL);
> @@ -711,11 +722,12 @@ static int mtk_drm_crtc_num_comp_planes(struct mtk_drm_crtc *mtk_crtc,
>  }
>
>  static inline
> -enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx)
> +enum drm_plane_type mtk_drm_crtc_plane_type(unsigned int plane_idx,
> +                                           unsigned int num_planes)
>  {
>         if (plane_idx == 0)
>                 return DRM_PLANE_TYPE_PRIMARY;
> -       else if (plane_idx == 1)
> +       else if (plane_idx == (num_planes - 1))
>                 return DRM_PLANE_TYPE_CURSOR;
>         else
>                 return DRM_PLANE_TYPE_OVERLAY;
> @@ -734,7 +746,8 @@ static int mtk_drm_crtc_init_comp_planes(struct drm_device *drm_dev,
>                 ret = mtk_plane_init(drm_dev,
>                                 &mtk_crtc->planes[mtk_crtc->layer_nr],
>                                 BIT(pipe),
> -                               mtk_drm_crtc_plane_type(mtk_crtc->layer_nr),
> +                               mtk_drm_crtc_plane_type(mtk_crtc->layer_nr,
> +                                                       num_planes),
>                                 mtk_ddp_comp_supported_rotations(comp));
>                 if (ret)
>                         return ret;
> @@ -830,9 +843,7 @@ int mtk_drm_crtc_create(struct drm_device *drm_dev,
>                         return ret;
>         }
>
> -       ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, &mtk_crtc->planes[0],
> -                               mtk_crtc->layer_nr > 1 ? &mtk_crtc->planes[1] :
> -                               NULL, pipe);
> +       ret = mtk_drm_crtc_init(drm_dev, mtk_crtc, pipe);
>         if (ret < 0)
>                 return ret;
>
> --
> 2.25.0.341.g760bfbb309-goog
>


More information about the dri-devel mailing list