[PATCH v4 1/3] dt-bindings: one file of all simple DSI panels
Benjamin Gaignard
benjamin.gaignard at st.com
Thu Feb 6 13:33:42 UTC 2020
From: Sam Ravnborg <sam at ravnborg.org>
To complement panel-simple.yaml, create panel-simple-dsi.yaml.
panel-simple-dsi-yaml are for all simple DSP panels with a single
power-supply and optional backlight / enable GPIO.
Migrate panasonic,vvx10f034n00 over to the new file.
The objectives with one file for all the simple DSI panels are:
- Make it simpler to add bindings for simple DSI panels
- Keep the number of bindings file lower
- Keep the binding documentation for simple DSI panels more consistent
Signed-off-by: Sam Ravnborg <sam at ravnborg.org>
Signed-off-by: Benjamin Gaignard <benjamin.gaignard at st.com>
Cc: Thierry Reding <thierry.reding at gmail.com>
Cc: Rob Herring <robh at kernel.org>
Cc: Maxime Ripard <mripard at kernel.org>
Cc: Yannick Fertre <yannick.fertre at st.com>
Cc: Mark Rutland <mark.rutland at arm.com>
Cc: Daniel Vetter <daniel at ffwll.ch>
Cc: dri-devel at lists.freedesktop.org
Cc: devicetree at vger.kernel.org
---
version 4:
- remove orisetech,otm8009a and raydium,rm68200 compatibles
- remove reset-gpios optional property
version 3:
- add orisetech,otm8009a and raydium,rm68200 compatibles
- add reset-gpios optional property
- fix indentation on compatible enumeration
.../display/panel/panasonic,vvx10f034n00.txt | 20 -------
.../bindings/display/panel/panel-simple-dsi.yaml | 67 ++++++++++++++++++++++
2 files changed, 67 insertions(+), 20 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
create mode 100644 Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
diff --git a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt b/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
deleted file mode 100644
index 37dedf6a6702..000000000000
--- a/Documentation/devicetree/bindings/display/panel/panasonic,vvx10f034n00.txt
+++ /dev/null
@@ -1,20 +0,0 @@
-Panasonic 10" WUXGA TFT LCD panel
-
-Required properties:
-- compatible: should be "panasonic,vvx10f034n00"
-- reg: DSI virtual channel of the peripheral
-- power-supply: phandle of the regulator that provides the supply voltage
-
-Optional properties:
-- backlight: phandle of the backlight device attached to the panel
-
-Example:
-
- mdss_dsi at fd922800 {
- panel at 0 {
- compatible = "panasonic,vvx10f034n00";
- reg = <0>;
- power-supply = <&vreg_vsp>;
- backlight = <&lp8566_wled>;
- };
- };
diff --git a/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
new file mode 100644
index 000000000000..8b60368a2425
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/panel-simple-dsi.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: (GPL-2.0-only or BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/panel-simple-dsi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple DSI panels with a single power-supply
+
+maintainers:
+ - Thierry Reding <thierry.reding at gmail.com>
+ - Sam Ravnborg <sam at ravnborg.org>
+
+description: |
+ This binding file is a collection of the DSI panels that
+ requires only a single power-supply.
+ There are optionally a backlight and an enable GPIO.
+ The panel may use an OF graph binding for the association to the display,
+ or it may be a direct child node of the display.
+
+ If the panel is more advanced a dedicated binding file is required.
+
+allOf:
+ - $ref: panel-common.yaml#
+
+properties:
+
+ compatible:
+ enum:
+ # compatible must be listed in alphabetical order, ordered by compatible.
+ # The description in the comment is mandatory for each compatible.
+
+ # Panasonic 10" WUXGA TFT LCD panel
+ - panasonic,vvx10f034n00
+
+ reg:
+ maxItems: 1
+ description: DSI virtual channel
+
+ backlight: true
+ enable-gpios: true
+ port: true
+ power-supply: true
+
+additionalProperties: false
+
+required:
+ - compatible
+ - power-supply
+ - reg
+
+examples:
+ - |
+ mdss_dsi at fd922800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ panel at 0 {
+ compatible = "panasonic,vvx10f034n00";
+ reg = <0>;
+ power-supply = <&vcc_lcd_reg>;
+
+ port {
+ panel: endpoint {
+ remote-endpoint = <<dc_out>;
+ };
+ };
+ };
+ };
--
2.15.0
More information about the dri-devel
mailing list