[PATCH v5 2/2] drm/tiny: add support for tft displays based on ilitek,ili9486
Sam Ravnborg
sam at ravnborg.org
Sun Feb 9 19:50:37 UTC 2020
Hi Kamlesh.
Thanks for the quick respin.
checkpatch was not too happy with this driver.
For DRM we use --strict.
I fixed it up like this whiel applying:
diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
index e960b16c05d6..5084b38c1a71 100644
--- a/drivers/gpu/drm/tiny/ili9486.c
+++ b/drivers/gpu/drm/tiny/ili9486.c
@@ -11,6 +11,7 @@
#include <linux/module.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
+
#include <video/mipi_display.h>
#include <drm/drm_atomic_helper.h>
@@ -37,7 +38,8 @@
* in front of the display controller. This means that 8-bit values have to be
* transferred as 16-bit.
*/
-static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par, size_t num)
+static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par,
+ size_t num)
{
struct spi_device *spi = mipi->spi;
void *data = par;
@@ -81,8 +83,8 @@ static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par, size_t num
}
static void waveshare_enable(struct drm_simple_display_pipe *pipe,
- struct drm_crtc_state *crtc_state,
- struct drm_plane_state *plane_state)
+ struct drm_crtc_state *crtc_state,
+ struct drm_plane_state *plane_state)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
struct mipi_dbi *dbi = &dbidev->dbi;
@@ -234,7 +236,8 @@ static int ili9486_probe(struct spi_device *spi)
dbi->command = waveshare_command;
dbi->read_commands = NULL;
- ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs, &waveshare_mode, rotation);
+ ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs,
+ &waveshare_mode, rotation);
if (ret)
return ret;
Applied to drm-misc-next and pushed out.
Sam
On Sun, Feb 09, 2020 at 11:36:41PM +0530, Kamlesh Gurudasani wrote:
> This adds support fot ilitek,ili9486 based displays with shift register
> in front of controller.
> Ozzmaker,Piscreen and Waveshare,rpi-lcd-35 are such displays.
>
> Acked-by: Sam Ravnborg <sam at ravnborg.org> (v4)
> Reviewed-by: Noralf Tronnes <noralf at tronnes.org> (v4)
> Signed-off-by: Kamlesh Gurudasani <kamlesh.gurudasani at gmail.com>
> ---
>
> v2 changes:
> * assignment of dbi_command before registration
> * made dc and reset gpio compulsory
> * typos and unwanted comments removed
> * changed the name of function which were display specific
> * arranged the Makefile entries in alphabetical order
>
> v3 changes:
> * no changes
>
> v4 changes:
> * no changes
>
> v5 changes:
> * replaced tinydrm with tiny in subject
> * added Rb tag (Noralf) and Ab tag (Sam)
> ---
> MAINTAINERS | 7 +
> drivers/gpu/drm/tiny/Kconfig | 14 ++
> drivers/gpu/drm/tiny/Makefile | 1 +
> drivers/gpu/drm/tiny/ili9486.c | 283 +++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 305 insertions(+)
> create mode 100644 drivers/gpu/drm/tiny/ili9486.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1196d07..af189ef 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5233,6 +5233,13 @@ S: Maintained
> F: drivers/gpu/drm/tiny/ili9225.c
> F: Documentation/devicetree/bindings/display/ilitek,ili9225.txt
>
> +DRM DRIVER FOR ILITEK ILI9486 PANELS
> +M: Kamlesh Gurudasani <kamlesh.gurudasani at gmail.com>
> +T: git git://anongit.freedesktop.org/drm/drm-misc
> +S: Maintained
> +F: drivers/gpu/drm/tiny/ili9486.c
> +F: Documentation/devicetree/bindings/display/ilitek,ili9486.yaml
> +
> DRM DRIVER FOR HX8357D PANELS
> M: Eric Anholt <eric at anholt.net>
> T: git git://anongit.freedesktop.org/drm/drm-misc
> diff --git a/drivers/gpu/drm/tiny/Kconfig b/drivers/gpu/drm/tiny/Kconfig
> index a866421..4160e74 100644
> --- a/drivers/gpu/drm/tiny/Kconfig
> +++ b/drivers/gpu/drm/tiny/Kconfig
> @@ -47,6 +47,20 @@ config TINYDRM_ILI9341
>
> If M is selected the module will be called ili9341.
>
> +config TINYDRM_ILI9486
> + tristate "DRM support for ILI9486 display panels"
> + depends on DRM && SPI
> + select DRM_KMS_HELPER
> + select DRM_KMS_CMA_HELPER
> + select DRM_MIPI_DBI
> + select BACKLIGHT_CLASS_DEVICE
> + help
> + DRM driver for the following Ilitek ILI9486 panels:
> + * PISCREEN 3.5" 320x480 TFT (Ozzmaker 3.5")
> + * RPILCD 3.5" 320x480 TFT (Waveshare 3.5")
> +
> + If M is selected the module will be called ili9486.
> +
> config TINYDRM_MI0283QT
> tristate "DRM support for MI0283QT"
> depends on DRM && SPI
> diff --git a/drivers/gpu/drm/tiny/Makefile b/drivers/gpu/drm/tiny/Makefile
> index 896cf31..c96ceee 100644
> --- a/drivers/gpu/drm/tiny/Makefile
> +++ b/drivers/gpu/drm/tiny/Makefile
> @@ -4,6 +4,7 @@ obj-$(CONFIG_DRM_GM12U320) += gm12u320.o
> obj-$(CONFIG_TINYDRM_HX8357D) += hx8357d.o
> obj-$(CONFIG_TINYDRM_ILI9225) += ili9225.o
> obj-$(CONFIG_TINYDRM_ILI9341) += ili9341.o
> +obj-$(CONFIG_TINYDRM_ILI9486) += ili9486.o
> obj-$(CONFIG_TINYDRM_MI0283QT) += mi0283qt.o
> obj-$(CONFIG_TINYDRM_REPAPER) += repaper.o
> obj-$(CONFIG_TINYDRM_ST7586) += st7586.o
> diff --git a/drivers/gpu/drm/tiny/ili9486.c b/drivers/gpu/drm/tiny/ili9486.c
> new file mode 100644
> index 0000000..e960b16
> --- /dev/null
> +++ b/drivers/gpu/drm/tiny/ili9486.c
> @@ -0,0 +1,283 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +/*
> + * DRM driver for Ilitek ILI9486 panels
> + *
> + * Copyright 2020 Kamlesh Gurudasani <kamlesh.gurudasani at gmail.com>
> + */
> +
> +#include <linux/backlight.h>
> +#include <linux/delay.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/property.h>
> +#include <linux/spi/spi.h>
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_atomic_helper.h>
> +#include <drm/drm_drv.h>
> +#include <drm/drm_fb_helper.h>
> +#include <drm/drm_gem_cma_helper.h>
> +#include <drm/drm_gem_framebuffer_helper.h>
> +#include <drm/drm_mipi_dbi.h>
> +#include <drm/drm_modeset_helper.h>
> +
> +#define ILI9486_ITFCTR1 0xb0
> +#define ILI9486_PWCTRL1 0xc2
> +#define ILI9486_VMCTRL1 0xc5
> +#define ILI9486_PGAMCTRL 0xe0
> +#define ILI9486_NGAMCTRL 0xe1
> +#define ILI9486_DGAMCTRL 0xe2
> +#define ILI9486_MADCTL_BGR BIT(3)
> +#define ILI9486_MADCTL_MV BIT(5)
> +#define ILI9486_MADCTL_MX BIT(6)
> +#define ILI9486_MADCTL_MY BIT(7)
> +
> +/*
> + * The PiScreen/waveshare rpi-lcd-35 has a SPI to 16-bit parallel bus converter
> + * in front of the display controller. This means that 8-bit values have to be
> + * transferred as 16-bit.
> + */
> +static int waveshare_command(struct mipi_dbi *mipi, u8 *cmd, u8 *par, size_t num)
> +{
> + struct spi_device *spi = mipi->spi;
> + void *data = par;
> + u32 speed_hz;
> + int i, ret;
> + u16 *buf;
> +
> + buf = kmalloc(32 * sizeof(u16), GFP_KERNEL);
> + if (!buf)
> + return -ENOMEM;
> +
> + /*
> + * The displays are Raspberry Pi HATs and connected to the 8-bit only
> + * SPI controller, so 16-bit command and parameters need byte swapping
> + * before being transferred as 8-bit on the big endian SPI bus.
> + * Pixel data bytes have already been swapped before this function is
> + * called.
> + */
> + buf[0] = cpu_to_be16(*cmd);
> + gpiod_set_value_cansleep(mipi->dc, 0);
> + speed_hz = mipi_dbi_spi_cmd_max_speed(spi, 2);
> + ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, buf, 2);
> + if (ret || !num)
> + goto free;
> +
> + /* 8-bit configuration data, not 16-bit pixel data */
> + if (num <= 32) {
> + for (i = 0; i < num; i++)
> + buf[i] = cpu_to_be16(par[i]);
> + num *= 2;
> + speed_hz = mipi_dbi_spi_cmd_max_speed(spi, num);
> + data = buf;
> + }
> +
> + gpiod_set_value_cansleep(mipi->dc, 1);
> + ret = mipi_dbi_spi_transfer(spi, speed_hz, 8, data, num);
> + free:
> + kfree(buf);
> +
> + return ret;
> +}
> +
> +static void waveshare_enable(struct drm_simple_display_pipe *pipe,
> + struct drm_crtc_state *crtc_state,
> + struct drm_plane_state *plane_state)
> +{
> + struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
> + struct mipi_dbi *dbi = &dbidev->dbi;
> + u8 addr_mode;
> + int ret, idx;
> +
> + if (!drm_dev_enter(pipe->crtc.dev, &idx))
> + return;
> +
> + DRM_DEBUG_KMS("\n");
> +
> + ret = mipi_dbi_poweron_conditional_reset(dbidev);
> + if (ret < 0)
> + goto out_exit;
> + if (ret == 1)
> + goto out_enable;
> +
> + mipi_dbi_command(dbi, ILI9486_ITFCTR1);
> + mipi_dbi_command(dbi, MIPI_DCS_EXIT_SLEEP_MODE);
> + msleep(250);
> +
> + mipi_dbi_command(dbi, MIPI_DCS_SET_PIXEL_FORMAT, 0x55);
> +
> + mipi_dbi_command(dbi, ILI9486_PWCTRL1, 0x44);
> +
> + mipi_dbi_command(dbi, ILI9486_VMCTRL1, 0x00, 0x00, 0x00, 0x00);
> +
> + mipi_dbi_command(dbi, ILI9486_PGAMCTRL,
> + 0x0F, 0x1F, 0x1C, 0x0C, 0x0F, 0x08, 0x48, 0x98,
> + 0x37, 0x0A, 0x13, 0x04, 0x11, 0x0D, 0x0);
> + mipi_dbi_command(dbi, ILI9486_NGAMCTRL,
> + 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
> + 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
> + mipi_dbi_command(dbi, ILI9486_DGAMCTRL,
> + 0x0F, 0x32, 0x2E, 0x0B, 0x0D, 0x05, 0x47, 0x75,
> + 0x37, 0x06, 0x10, 0x03, 0x24, 0x20, 0x00);
> +
> + mipi_dbi_command(dbi, MIPI_DCS_SET_DISPLAY_ON);
> + msleep(100);
> +
> + out_enable:
> + switch (dbidev->rotation) {
> + case 90:
> + addr_mode = ILI9486_MADCTL_MY;
> + break;
> + case 180:
> + addr_mode = ILI9486_MADCTL_MV;
> + break;
> + case 270:
> + addr_mode = ILI9486_MADCTL_MX;
> + break;
> + default:
> + addr_mode = ILI9486_MADCTL_MV | ILI9486_MADCTL_MY |
> + ILI9486_MADCTL_MX;
> + break;
> + }
> + addr_mode |= ILI9486_MADCTL_BGR;
> + mipi_dbi_command(dbi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
> + mipi_dbi_enable_flush(dbidev, crtc_state, plane_state);
> + out_exit:
> + drm_dev_exit(idx);
> +}
> +
> +static const struct drm_simple_display_pipe_funcs waveshare_pipe_funcs = {
> + .enable = waveshare_enable,
> + .disable = mipi_dbi_pipe_disable,
> + .update = mipi_dbi_pipe_update,
> + .prepare_fb = drm_gem_fb_simple_display_pipe_prepare_fb,
> +};
> +
> +static const struct drm_display_mode waveshare_mode = {
> + DRM_SIMPLE_MODE(480, 320, 73, 49),
> +};
> +
> +DEFINE_DRM_GEM_CMA_FOPS(ili9486_fops);
> +
> +static struct drm_driver ili9486_driver = {
> + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC,
> + .fops = &ili9486_fops,
> + .release = mipi_dbi_release,
> + DRM_GEM_CMA_VMAP_DRIVER_OPS,
> + .debugfs_init = mipi_dbi_debugfs_init,
> + .name = "ili9486",
> + .desc = "Ilitek ILI9486",
> + .date = "20200118",
> + .major = 1,
> + .minor = 0,
> +};
> +
> +static const struct of_device_id ili9486_of_match[] = {
> + { .compatible = "waveshare,rpi-lcd-35" },
> + { .compatible = "ozzmaker,piscreen" },
> + {},
> +};
> +MODULE_DEVICE_TABLE(of, ili9486_of_match);
> +
> +static const struct spi_device_id ili9486_id[] = {
> + { "ili9486", 0 },
> + { }
> +};
> +MODULE_DEVICE_TABLE(spi, ili9486_id);
> +
> +static int ili9486_probe(struct spi_device *spi)
> +{
> + struct device *dev = &spi->dev;
> + struct mipi_dbi_dev *dbidev;
> + struct drm_device *drm;
> + struct mipi_dbi *dbi;
> + struct gpio_desc *dc;
> + u32 rotation = 0;
> + int ret;
> +
> + dbidev = kzalloc(sizeof(*dbidev), GFP_KERNEL);
> + if (!dbidev)
> + return -ENOMEM;
> +
> + dbi = &dbidev->dbi;
> + drm = &dbidev->drm;
> + ret = devm_drm_dev_init(dev, drm, &ili9486_driver);
> + if (ret) {
> + kfree(dbidev);
> + return ret;
> + }
> +
> + drm_mode_config_init(drm);
> +
> + dbi->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
> + if (IS_ERR(dbi->reset)) {
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'reset'\n");
> + return PTR_ERR(dbi->reset);
> + }
> +
> + dc = devm_gpiod_get(dev, "dc", GPIOD_OUT_LOW);
> + if (IS_ERR(dc)) {
> + DRM_DEV_ERROR(dev, "Failed to get gpio 'dc'\n");
> + return PTR_ERR(dc);
> + }
> +
> + dbidev->backlight = devm_of_find_backlight(dev);
> + if (IS_ERR(dbidev->backlight))
> + return PTR_ERR(dbidev->backlight);
> +
> + device_property_read_u32(dev, "rotation", &rotation);
> +
> + ret = mipi_dbi_spi_init(spi, dbi, dc);
> + if (ret)
> + return ret;
> +
> + dbi->command = waveshare_command;
> + dbi->read_commands = NULL;
> +
> + ret = mipi_dbi_dev_init(dbidev, &waveshare_pipe_funcs, &waveshare_mode, rotation);
> + if (ret)
> + return ret;
> +
> + drm_mode_config_reset(drm);
> +
> + ret = drm_dev_register(drm, 0);
> + if (ret)
> + return ret;
> +
> + spi_set_drvdata(spi, drm);
> +
> + drm_fbdev_generic_setup(drm, 0);
> +
> + return 0;
> +}
> +
> +static int ili9486_remove(struct spi_device *spi)
> +{
> + struct drm_device *drm = spi_get_drvdata(spi);
> +
> + drm_dev_unplug(drm);
> + drm_atomic_helper_shutdown(drm);
> +
> + return 0;
> +}
> +
> +static void ili9486_shutdown(struct spi_device *spi)
> +{
> + drm_atomic_helper_shutdown(spi_get_drvdata(spi));
> +}
> +
> +static struct spi_driver ili9486_spi_driver = {
> + .driver = {
> + .name = "ili9486",
> + .of_match_table = ili9486_of_match,
> + },
> + .id_table = ili9486_id,
> + .probe = ili9486_probe,
> + .remove = ili9486_remove,
> + .shutdown = ili9486_shutdown,
> +};
> +module_spi_driver(ili9486_spi_driver);
> +
> +MODULE_DESCRIPTION("Ilitek ILI9486 DRM driver");
> +MODULE_AUTHOR("Kamlesh Gurudasani <kamlesh.gurudasani at gmail.com>");
> +MODULE_LICENSE("GPL");
> --
> 2.7.4
More information about the dri-devel
mailing list