[PATCH 1/2] arm64: dts: mt8183: Add gce setting in display node
CK Hu
ck.hu at mediatek.com
Wed Feb 12 10:48:34 UTC 2020
On Wed, 2020-02-12 at 17:55 +0800, Bibby Hsieh wrote:
> In order to use GCE function, we need add some information
> into display node (mboxes, mediatek,gce-client-reg, mediatek,gce-events).
>
> Signed-off-by: Bibby Hsieh <bibby.hsieh at mediatek.com>
> Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
> ---
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index be4428c92f35..1f0fc281bc2d 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -9,6 +9,7 @@
> #include <dt-bindings/interrupt-controller/arm-gic.h>
> #include <dt-bindings/interrupt-controller/irq.h>
> #include <dt-bindings/power/mt8183-power.h>
> +#include <dt-bindings/gce/mt8183-gce.h>
> #include "mt8183-pinfunc.h"
>
> / {
> @@ -664,6 +665,9 @@
> reg = <0 0x14000000 0 0x1000>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> #clock-cells = <1>;
> + mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST 1>,
I would like to remove atomic parameter, so please follow [1] to remove
it.
[1] https://patchwork.kernel.org/patch/10765419/
Regards,
CK
> + <&gce 1 CMDQ_THR_PRIO_HIGHEST 1>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
> };
>
> ovl0: ovl at 14008000 {
> @@ -672,6 +676,7 @@
> interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
> };
>
> ovl_2l0: ovl at 14009000 {
> @@ -680,6 +685,7 @@
> interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
> };
>
> ovl_2l1: ovl at 1400a000 {
> @@ -688,6 +694,7 @@
> interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
> };
>
> rdma0: rdma at 1400b000 {
> @@ -697,6 +704,7 @@
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_RDMA0>;
> mediatek,rdma_fifo_size = <5120>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
> };
>
> rdma1: rdma at 1400c000 {
> @@ -706,6 +714,7 @@
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_RDMA1>;
> mediatek,rdma_fifo_size = <2048>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
> };
>
> color0: color at 1400e000 {
> @@ -715,6 +724,7 @@
> interrupts = <GIC_SPI 231 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_COLOR0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
> };
>
> ccorr0: ccorr at 1400f000 {
> @@ -723,6 +733,7 @@
> interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_CCORR0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
> };
>
> aal0: aal at 14010000 {
> @@ -732,6 +743,7 @@
> interrupts = <GIC_SPI 233 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_AAL0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
> };
>
> gamma0: gamma at 14011000 {
> @@ -741,6 +753,7 @@
> interrupts = <GIC_SPI 234 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
> };
>
> dither0: dither at 14012000 {
> @@ -749,6 +762,7 @@
> interrupts = <GIC_SPI 235 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> clocks = <&mmsys CLK_MM_DISP_DITHER0>;
> + mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
> };
>
> mutex: mutex at 14016000 {
> @@ -756,6 +770,8 @@
> reg = <0 0x14016000 0 0x1000>;
> interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_LOW>;
> power-domains = <&scpsys MT8183_POWER_DOMAIN_DISP>;
> + mediatek,gce-events = <CMDQ_EVENT_MUTEX_STREAM_DONE0>,
> + <CMDQ_EVENT_MUTEX_STREAM_DONE1>;
> };
>
> smi_common: smi at 14019000 {
More information about the dri-devel
mailing list