[PATCH v6 47/51] drm/omap: sdi: Register a drm_bridge

Laurent Pinchart laurent.pinchart at ideasonboard.com
Sun Feb 16 21:03:04 UTC 2020


In order to integrate with a chain of drm_bridge, the internal SDI
output has to expose its operations through the drm_bridge API.
Register a bridge at initialisation time to do so and remove the
omap_dss_device operations that are now unused.

Signed-off-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen at ti.com>
---
Changes since v5:

- Rebased on top of drm_bridge_state

Changes since v3:

- Split dss/base.h and omap_connector.c cleanups to a separate patch

Changes since v2:

- Remove unused omapdss_device_connector_type() function
- Unregister bridge if port initialisation fails
---
 drivers/gpu/drm/omapdrm/dss/sdi.c | 168 +++++++++++++++++++-----------
 1 file changed, 109 insertions(+), 59 deletions(-)

diff --git a/drivers/gpu/drm/omapdrm/dss/sdi.c b/drivers/gpu/drm/omapdrm/dss/sdi.c
index 7dedfcc86922..417a8740ad0a 100644
--- a/drivers/gpu/drm/omapdrm/dss/sdi.c
+++ b/drivers/gpu/drm/omapdrm/dss/sdi.c
@@ -15,6 +15,8 @@
 #include <linux/regulator/consumer.h>
 #include <linux/string.h>
 
+#include <drm/drm_bridge.h>
+
 #include "dss.h"
 #include "omapdss.h"
 
@@ -30,9 +32,11 @@ struct sdi_device {
 	int datapairs;
 
 	struct omap_dss_device output;
+	struct drm_bridge bridge;
 };
 
-#define dssdev_to_sdi(dssdev) container_of(dssdev, struct sdi_device, output)
+#define drm_bridge_to_sdi(bridge) \
+	container_of(bridge, struct sdi_device, bridge)
 
 struct sdi_clk_calc_ctx {
 	struct sdi_device *sdi;
@@ -118,9 +122,82 @@ static void sdi_config_lcd_manager(struct sdi_device *sdi)
 	dss_mgr_set_lcd_config(&sdi->output, &sdi->mgr_config);
 }
 
-static void sdi_display_enable(struct omap_dss_device *dssdev)
+/* -----------------------------------------------------------------------------
+ * DRM Bridge Operations
+ */
+
+static int sdi_bridge_attach(struct drm_bridge *bridge,
+			     enum drm_bridge_attach_flags flags)
+{
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
+
+	if (!(flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR))
+		return -EINVAL;
+
+	return drm_bridge_attach(bridge->encoder, sdi->output.next_bridge,
+				 bridge, flags);
+}
+
+static enum drm_mode_status
+sdi_bridge_mode_valid(struct drm_bridge *bridge,
+		      const struct drm_display_mode *mode)
+{
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
+	unsigned long pixelclock = mode->clock * 1000;
+	struct dispc_clock_info dispc_cinfo;
+	unsigned long fck;
+	int ret;
+
+	if (pixelclock == 0)
+		return MODE_NOCLOCK;
+
+	ret = sdi_calc_clock_div(sdi, pixelclock, &fck, &dispc_cinfo);
+	if (ret < 0)
+		return MODE_CLOCK_RANGE;
+
+	return MODE_OK;
+}
+
+static bool sdi_bridge_mode_fixup(struct drm_bridge *bridge,
+				  const struct drm_display_mode *mode,
+				  struct drm_display_mode *adjusted_mode)
+{
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
+	unsigned long pixelclock = mode->clock * 1000;
+	struct dispc_clock_info dispc_cinfo;
+	unsigned long fck;
+	unsigned long pck;
+	int ret;
+
+	ret = sdi_calc_clock_div(sdi, pixelclock, &fck, &dispc_cinfo);
+	if (ret < 0)
+		return false;
+
+	pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
+
+	if (pck != pixelclock)
+		dev_dbg(&sdi->pdev->dev,
+			"pixel clock adjusted from %lu Hz to %lu Hz\n",
+			pixelclock, pck);
+
+	adjusted_mode->clock = pck / 1000;
+
+	return true;
+}
+
+static void sdi_bridge_mode_set(struct drm_bridge *bridge,
+				const struct drm_display_mode *mode,
+				const struct drm_display_mode *adjusted_mode)
+{
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
+
+	sdi->pixelclock = adjusted_mode->clock * 1000;
+}
+
+static void sdi_bridge_enable(struct drm_bridge *bridge,
+			      struct drm_bridge_state *bridge_state)
 {
-	struct sdi_device *sdi = dssdev_to_sdi(dssdev);
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
 	struct dispc_clock_info dispc_cinfo;
 	unsigned long fck;
 	int r;
@@ -181,9 +258,10 @@ static void sdi_display_enable(struct omap_dss_device *dssdev)
 	regulator_disable(sdi->vdds_sdi_reg);
 }
 
-static void sdi_display_disable(struct omap_dss_device *dssdev)
+static void sdi_bridge_disable(struct drm_bridge *bridge,
+			       struct drm_bridge_state *bridge_state)
 {
-	struct sdi_device *sdi = dssdev_to_sdi(dssdev);
+	struct sdi_device *sdi = drm_bridge_to_sdi(bridge);
 
 	dss_mgr_disable(&sdi->output);
 
@@ -194,71 +272,40 @@ static void sdi_display_disable(struct omap_dss_device *dssdev)
 	regulator_disable(sdi->vdds_sdi_reg);
 }
 
-static void sdi_set_timings(struct omap_dss_device *dssdev,
-			    const struct drm_display_mode *mode)
-{
-	struct sdi_device *sdi = dssdev_to_sdi(dssdev);
-
-	sdi->pixelclock = mode->clock * 1000;
-}
+static const struct drm_bridge_funcs sdi_bridge_funcs = {
+	.attach = sdi_bridge_attach,
+	.mode_valid = sdi_bridge_mode_valid,
+	.mode_fixup = sdi_bridge_mode_fixup,
+	.mode_set = sdi_bridge_mode_set,
+	.atomic_enable = sdi_bridge_enable,
+	.atomic_disable = sdi_bridge_disable,
+};
 
-static int sdi_check_timings(struct omap_dss_device *dssdev,
-			     struct drm_display_mode *mode)
+static void sdi_bridge_init(struct sdi_device *sdi)
 {
-	struct sdi_device *sdi = dssdev_to_sdi(dssdev);
-	struct dispc_clock_info dispc_cinfo;
-	unsigned long pixelclock = mode->clock * 1000;
-	unsigned long fck;
-	unsigned long pck;
-	int r;
-
-	if (pixelclock == 0)
-		return -EINVAL;
-
-	r = sdi_calc_clock_div(sdi, pixelclock, &fck, &dispc_cinfo);
-	if (r)
-		return r;
+	sdi->bridge.funcs = &sdi_bridge_funcs;
+	sdi->bridge.of_node = sdi->pdev->dev.of_node;
+	sdi->bridge.type = DRM_MODE_CONNECTOR_LVDS;
 
-	pck = fck / dispc_cinfo.lck_div / dispc_cinfo.pck_div;
-
-	if (pck != pixelclock) {
-		DSSWARN("Pixel clock adjusted from %lu Hz to %lu Hz\n",
-			pixelclock, pck);
-
-		mode->clock = pck / 1000;
-	}
-
-	return 0;
+	drm_bridge_add(&sdi->bridge);
 }
 
-static int sdi_connect(struct omap_dss_device *src,
-		       struct omap_dss_device *dst)
+static void sdi_bridge_cleanup(struct sdi_device *sdi)
 {
-	return omapdss_device_connect(dst->dss, dst, dst->next);
+	drm_bridge_remove(&sdi->bridge);
 }
 
-static void sdi_disconnect(struct omap_dss_device *src,
-			   struct omap_dss_device *dst)
-{
-	omapdss_device_disconnect(dst, dst->next);
-}
-
-static const struct omap_dss_device_ops sdi_ops = {
-	.connect = sdi_connect,
-	.disconnect = sdi_disconnect,
-
-	.enable = sdi_display_enable,
-	.disable = sdi_display_disable,
-
-	.check_timings = sdi_check_timings,
-	.set_timings = sdi_set_timings,
-};
+/* -----------------------------------------------------------------------------
+ * Initialisation and Cleanup
+ */
 
 static int sdi_init_output(struct sdi_device *sdi)
 {
 	struct omap_dss_device *out = &sdi->output;
 	int r;
 
+	sdi_bridge_init(sdi);
+
 	out->dev = &sdi->pdev->dev;
 	out->id = OMAP_DSS_OUTPUT_SDI;
 	out->type = OMAP_DISPLAY_TYPE_SDI;
@@ -266,14 +313,15 @@ static int sdi_init_output(struct sdi_device *sdi)
 	out->dispc_channel = OMAP_DSS_CHANNEL_LCD;
 	/* We have SDI only on OMAP3, where it's on port 1 */
 	out->of_port = 1;
-	out->ops = &sdi_ops;
 	out->owner = THIS_MODULE;
 	out->bus_flags = DRM_BUS_FLAG_PIXDATA_DRIVE_POSEDGE	/* 15.5.9.1.2 */
 		       | DRM_BUS_FLAG_SYNC_DRIVE_POSEDGE;
 
-	r = omapdss_device_init_output(out, NULL);
-	if (r < 0)
+	r = omapdss_device_init_output(out, &sdi->bridge);
+	if (r < 0) {
+		sdi_bridge_cleanup(sdi);
 		return r;
+	}
 
 	omapdss_device_register(out);
 
@@ -284,6 +332,8 @@ static void sdi_uninit_output(struct sdi_device *sdi)
 {
 	omapdss_device_unregister(&sdi->output);
 	omapdss_device_cleanup_output(&sdi->output);
+
+	sdi_bridge_cleanup(sdi);
 }
 
 int sdi_init_port(struct dss_device *dss, struct platform_device *pdev,
-- 
Regards,

Laurent Pinchart



More information about the dri-devel mailing list