[PATCH 2/4] dt-bindings: panel: lvds: Add properties for clock and data polarities

[Maxime Ripard]

Some LVDS encoders can support multiple polarities on the data and
clock lanes, and similarly some panels require a given polarity on
their inputs. Add a property on the panel to configure the encoder
properly.

Signed-off-by: Maxime Ripard <maxime at cerno.tech>
---
 Documentation/devicetree/bindings/display/panel/lvds.yaml | 10 ++++++++-
 1 file changed, 10 insertions(+)

diff --git a/Documentation/devicetree/bindings/display/panel/lvds.yaml b/Documentation/devicetree/bindings/display/panel/lvds.yaml
index d0083301acbe..4a1111a1ab38 100644
--- a/Documentation/devicetree/bindings/display/panel/lvds.yaml
+++ b/Documentation/devicetree/bindings/display/panel/lvds.yaml
@@ -90,6 +90,16 @@ properties:
       CTL2: Data Enable
       CTL3: 0
 
+  clock-active-low:
+    type: boolean
+    description: >
+      If set, reverse the clock polarity on the clock lane.
+
+  data-active-low:
+    type: boolean
+    description: >
+      If set, reverse the bit polarity on all data lanes.
+
   data-mirror:
     type: boolean
     description:
-- 
git-series 0.9.1