[PATCH 00/89] drm/vc4: Support BCM2711 Display Pipeline
Maxime Ripard
maxime at cerno.tech
Mon Feb 24 09:06:02 UTC 2020
Hi everyone,
Here's a (pretty long) series to introduce support in the VC4 DRM driver
for the display pipeline found in the BCM2711 (and thus the RaspberryPi 4).
The main differences are that there's two HDMI controllers and that there's
more pixelvalve now. Those pixelvalve come with a mux in the HVS that still
have only 3 FIFOs. Both of those differences are breaking a bunch of
expectations in the driver, so we first need a good bunch of cleanup and
reworks to introduce support for the new controllers.
Similarly, the HDMI controller has all its registers shuffled and split in
multiple controllers now, so we need a bunch of changes to support this as
well.
Only the HDMI support is enabled for now (even though the DPI output has
been tested too). There's a couple of rough edges still that should be
addressed in the next versions:
- Dual output doesn't work
- The transposer (and thus writeback) doesn't work either and conflicts
with the output mux too.
Let me know if you have any comments
Maxime
Dave Stevenson (2):
drm/vc4: drv: Add support for the BCM2711 HVS5
drm/vc4: plane: Improve LBM usage
Maxime Ripard (87):
dt-bindings: i2c: brcmstb: Convert the BRCMSTB binding to a schema
dt-bindings: i2c: brcmstb: Add BCM2711 BSC/AUTO-I2C binding
i2c: brcmstb: Support BCM2711 HDMI BSC controllers
i2c: brcmstb: Allow to compile it on BCM2835
clk: Return error code when of provider pointer is NULL
dt-bindings: clock: Add a binding for the RPi Firmware clocks
clk: bcm: rpi: Allow the driver to be probed by DT
clk: bcm: rpi: Statically init clk_init_data
clk: bcm: rpi: Use clk_hw_register for pllb_arm
clk: bcm: rpi: Remove global pllb_arm clock pointer
clk: bcm: rpi: Make sure pllb_arm is removed
clk: bcm: rpi: Remove pllb_arm_lookup global pointer
clk: bcm: rpi: Switch to clk_hw_register_clkdev
clk: bcm: rpi: Make sure the clkdev lookup is removed
clk: bcm: rpi: Create a data structure for the clocks
clk: bcm: rpi: Add clock id to data
clk: bcm: rpi: Pass the clocks data to the firmware function
clk: bcm: rpi: Rename is_prepared function
clk: bcm: rpi: Split pllb clock hooks
clk: bcm: rpi: Make the PLLB registration function return a clk_hw
clk: bcm: rpi: Add DT provider for the clocks
clk: bcm: rpi: Discover the firmware clocks
ARM: dts: bcm2711: Add firmware clocks node
reset: Move reset-simple header out of drivers/reset
reset: simple: Add reset callback
dt-bindings: clock: Add BCM2711 DVP binding
clk: bcm: Add BCM2711 DVP driver
ARM: dts: bcm2711: Add HDMI DVP
dt-bindings: display: Convert VC4 bindings to schemas
dt-bindings: display: vc4: dpi: Add missing clock-names property
dt-bindings: display: vc4: dsi: Add missing clock properties
dt-bindings: display: vc4: hdmi: Add missing clock-names property
dt-bindings: display: vc4: Document BCM2711 VC5
drm/vc4: drv: Add include guards
drm/vc4: drv: Support BCM2711
drm/vc4: plane: Move planes creation to its own function
drm/vc4: plane: Move additional planes creation to driver
drm/vc4: plane: Register all the planes at once
drm/vc4: plane: Create overlays for any CRTC
drm/vc4: plane: Create more planes
drm/vc4: crtc: Rename SoC data structures
drm/vc4: crtc: Move crtc state to common header
drm/vc4: crtc: Deal with different number of pixel per clock
drm/vc4: crtc: Use a shared interrupt
drm/vc4: crtc: Turn static const variable into a define
drm/vc4: crtc: Move the cob allocation outside of bind
drm/vc4: crtc: Rename HVS channel to output
drm/vc4: crtc: Use local chan variable
drm/vc4: crtc: Enable and disable the PV in atomic_enable / disable
drm/vc4: crtc: Assign output to channel automatically
drm/vc4: crtc: Add FIFO depth to vc4_crtc_data
drm/vc4: crtc: Add function to compute FIFO level bits
drm/vc4: crtc: Rename HDMI encoder type to HDMI0
drm/vc4: crtc: Add HDMI1 encoder type
drm/vc4: crtc: Remove redundant call to drm_crtc_enable_color_mgmt
drm/vc4: crtc: Disable color management for HVS5
dt-bindings: display: vc4: pv: Add BCM2711 pixel valves
drm/vc4: crtc: Add BCM2711 pixelvalves
drm/vc4: hdmi: Use debugfs private field
drm/vc4: hdmi: Move structure to header
drm/vc4: hdmi: rework connectors and encoders
drm/vc4: hdmi: Remove DDC argument to connector_init
drm/vc4: hdmi: Rename hdmi to vc4_hdmi
drm/vc4: hdmi: Move accessors to vc4_hdmi
drm/vc4: hdmi: Use local vc4_hdmi directly
drm/vc4: hdmi: Add container_of macros for encoders and connectors
drm/vc4: hdmi: Pass vc4_hdmi to CEC code
drm/vc4: hdmi: Remove vc4_dev hdmi pointer
drm/vc4: hdmi: Remove vc4_hdmi_connector
drm/vc4: hdmi: Introduce resource init and variant
drm/vc4: hdmi: Implement a register layout abstraction
drm/vc4: hdmi: Add reset callback
drm/vc4: hdmi: Add PHY init and disable function
drm/vc4: hdmi: Add PHY RNG enable / disable function
drm/vc4: hdmi: Add a CSC setup callback
drm/vc4: hdmi: Add a set_timings callback
drm/vc4: hdmi: Add HDMI ID
drm/vc4: hdmi: Deal with multiple debugfs files
drm/vc4: hdmi: Add an audio support flag
drm/vc4: hdmi: Move CEC init to its own function
drm/vc4: hdmi: Add CEC support flag
drm/vc4: hdmi: Remove unused CEC_CLOCK_DIV define
drm/vc4: hdmi: Rename drm_encoder pointer in mode_valid
drm/vc4: hdmi: Adjust HSM clock rate depending on pixel rate
drm/vc4: hdmi: Support the BCM2711 HDMI controllers
dt-bindings: display: vc4: hdmi: Add BCM2711 HDMI controllers bindings
ARM: dts: bcm2711: Enable the display pipeline
Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml | 47 ++-
Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.yaml | 39 ++-
Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt | 174 +---------
Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml | 72 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml | 84 ++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml | 180 ++++++++++-
Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml | 45 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml | 37 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml | 42 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml | 35 ++-
Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml | 44 ++-
Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml | 97 +++++-
Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt | 26 +-
MAINTAINERS | 4 +-
arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 40 ++-
arch/arm/boot/dts/bcm2711.dtsi | 132 +++++++-
drivers/clk/bcm/Kconfig | 1 +-
drivers/clk/bcm/Makefile | 1 +-
drivers/clk/bcm/clk-bcm2711-dvp.c | 113 ++++++-
drivers/clk/bcm/clk-raspberrypi.c | 271 ++++++++++----
drivers/clk/clk.c | 14 +-
drivers/gpu/drm/vc4/Makefile | 1 +-
drivers/gpu/drm/vc4/vc4_crtc.c | 328 ++++++++++-------
drivers/gpu/drm/vc4/vc4_drv.c | 5 +-
drivers/gpu/drm/vc4/vc4_drv.h | 56 ++-
drivers/gpu/drm/vc4/vc4_hdmi.c | 1364 ++++++++++++++++++++++++++++++++++++++++++------------------------------
drivers/gpu/drm/vc4/vc4_hdmi.h | 175 +++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_phy.c | 509 +++++++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hdmi_regs.h | 445 +++++++++++++++++++++++-
drivers/gpu/drm/vc4/vc4_hvs.c | 17 +-
drivers/gpu/drm/vc4/vc4_kms.c | 175 ++++++++-
drivers/gpu/drm/vc4/vc4_plane.c | 271 ++++++++++----
drivers/gpu/drm/vc4/vc4_regs.h | 173 ++++-----
drivers/i2c/busses/Kconfig | 2 +-
drivers/i2c/busses/i2c-brcmstb.c | 33 ++-
drivers/reset/reset-simple.c | 24 +-
drivers/reset/reset-simple.h | 41 +--
drivers/reset/reset-socfpga.c | 3 +-
drivers/reset/reset-sunxi.c | 3 +-
drivers/reset/reset-uniphier-glue.c | 3 +-
include/linux/reset/reset-simple.h | 45 ++-
include/soc/bcm2835/raspberrypi-firmware.h | 5 +-
43 files changed, 4020 insertions(+), 1193 deletions(-)
create mode 100644 Documentation/devicetree/bindings/clock/brcm,bcm2711-dvp.yaml
create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.yaml
delete mode 100644 Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dpi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-dsi0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hdmi.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-hvs.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-pixelvalve0.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-txp.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-v3d.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vc4.yaml
create mode 100644 Documentation/devicetree/bindings/display/brcm,bcm2835-vec.yaml
create mode 100644 Documentation/devicetree/bindings/i2c/brcm,brcmstb-i2c.yaml
delete mode 100644 Documentation/devicetree/bindings/i2c/i2c-brcmstb.txt
create mode 100644 drivers/clk/bcm/clk-bcm2711-dvp.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi.h
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_phy.c
create mode 100644 drivers/gpu/drm/vc4/vc4_hdmi_regs.h
delete mode 100644 drivers/reset/reset-simple.h
create mode 100644 include/linux/reset/reset-simple.h
base-commit: fca8fce14e6ce96f4d22783ab8ddea09c0f4de34
--
git-series 0.9.1
More information about the dri-devel
mailing list