[PATCHv2 04/56] omap/drm: drop unused dsi.configure_pins

Laurent Pinchart laurent.pinchart at ideasonboard.com
Mon Feb 24 23:42:49 UTC 2020


Hi Sebastian,

Thank you for the patch.

On Tue, Feb 25, 2020 at 12:20:34AM +0100, Sebastian Reichel wrote:
> The panel-dsi-cm's ddata->pin_config is always NULL, so this
> callback is never called. Instead the DSI encoder gets the pin
> configuration directly from DT.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel at collabora.com>
> ---
>  drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c | 11 -----------
>  drivers/gpu/drm/omapdrm/dss/dsi.c               |  1 -
>  drivers/gpu/drm/omapdrm/dss/omapdss.h           |  2 --
>  3 files changed, 14 deletions(-)
> 
> diff --git a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> index 3484b5d4a91c..e7fe5d702337 100644
> --- a/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> +++ b/drivers/gpu/drm/omapdrm/displays/panel-dsi-cm.c
> @@ -68,8 +68,6 @@ struct panel_drv_data {
>  	int width_mm;
>  	int height_mm;
>  
> -	struct omap_dsi_pin_config pin_config;
> -
>  	/* runtime variables */
>  	bool enabled;
>  
> @@ -623,15 +621,6 @@ static int dsicm_power_on(struct panel_drv_data *ddata)
>  		}
>  	}
>  
> -	if (ddata->pin_config.num_pins > 0) {
> -		r = src->ops->dsi.configure_pins(src, &ddata->pin_config);
> -		if (r) {
> -			dev_err(&ddata->pdev->dev,
> -				"failed to configure DSI pins\n");
> -			goto err_vddi;
> -		}
> -	}
> -
>  	r = src->ops->dsi.set_config(src, &dsi_config);
>  	if (r) {
>  		dev_err(&ddata->pdev->dev, "failed to configure DSI\n");
> diff --git a/drivers/gpu/drm/omapdrm/dss/dsi.c b/drivers/gpu/drm/omapdrm/dss/dsi.c
> index 79ddfbfd1b58..8c39823a8295 100644
> --- a/drivers/gpu/drm/omapdrm/dss/dsi.c
> +++ b/drivers/gpu/drm/omapdrm/dss/dsi.c
> @@ -4892,7 +4892,6 @@ static const struct omap_dss_device_ops dsi_ops = {
>  
>  		.enable_hs = dsi_vc_enable_hs,
>  
> -		.configure_pins = dsi_configure_pins,
>  		.set_config = dsi_set_config,
>  
>  		.enable_video_output = dsi_enable_video_output,
> diff --git a/drivers/gpu/drm/omapdrm/dss/omapdss.h b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> index cbbe10b2b60d..b0424daaceed 100644
> --- a/drivers/gpu/drm/omapdrm/dss/omapdss.h
> +++ b/drivers/gpu/drm/omapdrm/dss/omapdss.h
> @@ -292,8 +292,6 @@ struct omapdss_dsi_ops {

I think you can drop the definition of the omap_dsi_pin_config structure
earlier in this file too, as well as the OMAP_DSS_MAX_DSI_PINS macro.
With this fixed,

Reviewed-by: Laurent Pinchart <laurent.pinchart at ideasonboard.com>

>  	/* bus configuration */
>  	int (*set_config)(struct omap_dss_device *dssdev,
>  			const struct omap_dss_dsi_config *cfg);
> -	int (*configure_pins)(struct omap_dss_device *dssdev,
> -			const struct omap_dsi_pin_config *pin_cfg);
>  
>  	void (*enable_hs)(struct omap_dss_device *dssdev, int channel,
>  			bool enable);

-- 
Regards,

Laurent Pinchart


More information about the dri-devel mailing list