[PATCH v2 2/4] dt-bindings: display: msm: Add required dma-range property

[Rob Herring]

On Thu, Feb 20, 2020 at 12:27 PM Jordan Crouse <jcrouse at codeaurora.org> wrote:
>
> The GMU node now requires a specific dma-range property so that the driver

s/dma-range/dma-ranges/ here and the subject.

> can use the DMA API to do the few memory allocations required by the GMU.
> This sets the IOMMU iova allocator to match the 'uncached' part of the
> GMU virtual address space.

Sounds like a bunch of kernel things and this is a binding.

>
> v2: Fix the dma-ranges tag. The third pair should be the size.
>
> Signed-off-by: Jordan Crouse <jcrouse at codeaurora.org>
> ---
>
>  Documentation/devicetree/bindings/display/msm/gmu.yaml | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 776ff92..d11a073 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -83,6 +83,13 @@ properties:
>        Phandle to the OPP table for the available GMU frequencies. Refer to
>        ../../opp/opp.txt for more information.
>
> +  dma-ranges:

dma-ranges is a bus property and doesn't go in device nodes (that
don't implement a bus like PCI host for example). This would not have
even worked a few kernel versions back because the kernel would only
start looking for dma-ranges in a parent node.

> +    $ref: /schemas/types.yaml#/definitions/uint32-array
> +    description:
> +      Describe the dma-address range for the device. This should always
> +      describe the range between 0x60000000 and 0x80000000 which represents

If this is always the region, then why does it need to be in DT? Just
set your dma_mask which drivers should be doing if they want anything
other than (2^32 - 1). dma-ranges sets the bus_dma_mask.

> +      the uncached region of the GMU address space.
> +
>  required:
>    - compatible
>    - reg
> @@ -95,6 +102,7 @@ required:
>    - power-domain-names
>    - iommus
>    - operating-points-v2
> +  - dma-ranges
>
>  examples:
>   - |
> @@ -127,4 +135,6 @@ examples:
>
>          iommus = <&adreno_smmu 5>;
>          operating-points-v2 = <&gmu_opp_table>;
> +
> +        dma-ranges = <0 0x60000000 0 0x60000000 0 0x20000000>;
>     };
> --
> 2.7.4
>