[PATCH v2 0/6] Add LCD support for Pine64 Pinebook 1080p

[Vasily Khoruzhick]

Since ANX6345 driver has been merged we can add support for Pinebook LCD

This is a follow up on [1] which attempted to add support for all the
A64-based Pinebooks.

Since patches for 768p were dropped we don't need edp-connector binding
discussed in [1] and its earlier versions and we can use panel-simple
binding as everyone else does.

If we ever going to add support for 768p we can do it through dt-overlay
with appropriate panel node or by teaching bootloader to patch dtb with
correct panel compatible.

Similar approach was chosen in [2]

[1] https://patchwork.kernel.org/cover/10814169/
[2] https://patchwork.kernel.org/patch/11277765/

v2:
  - Collect r-b tags
  - Don't print devm_regulator_get() error only if it is -EPROBE_DEFER
  - Keep compatibles alphabetically sorted in panel-simple.yaml
  - Properly indent new panel modes
  - Drop #address-cells, #size-cells properties and @0 suffix
    of endpoints in sun50i-a64-pinebook.dts

Icenowy Zheng (1):
  arm64: allwinner: a64: enable LCD-related hardware for Pinebook

Samuel Holland (1):
  drm/bridge: anx6345: Fix getting anx6345 regulators

Vasily Khoruzhick (4):
  drm/bridge: anx6345: don't print error message if regulator is not
    ready
  dt-bindings: Add Guangdong Neweast Optoelectronics CO. LTD vendor
    prefix
  dt-bindings: display: simple: Add NewEast Optoelectronics WJFH116008A
    compatible
  drm/panel: simple: Add NewEast Optoelectronics CO., LTD WJFH116008A
    panel support

 .../bindings/display/panel/panel-simple.yaml  |  2 +
 .../devicetree/bindings/vendor-prefixes.yaml  |  2 +
 .../dts/allwinner/sun50i-a64-pinebook.dts     | 61 ++++++++++++++++++-
 .../drm/bridge/analogix/analogix-anx6345.c    | 12 ++--
 drivers/gpu/drm/panel/panel-simple.c          | 48 +++++++++++++++
 5 files changed, 120 insertions(+), 5 deletions(-)

-- 
2.25.0