[PATCH 3/3 v2] drm/panel: Add driver for Novatek NT35510-based panels
Sam Ravnborg
sam at ravnborg.org
Sat Feb 29 13:08:27 UTC 2020
On Sun, Feb 23, 2020 at 01:18:41PM +0100, Linus Walleij wrote:
> This adds a driver for panels based on the Novatek NT35510
> display driver IC, such as the Hydis HVA40WV1 panel found
> in the Samsung GT-S7710.
>
> The NT35510 can be used with both internal and external
> backlight (such as GPIO backlight) so we support both:
> if no external backlight is found, we register a subdriver
> for the internal backlight.
>
> Cc: Stephan Gerhold <stephan at gerhold.net>
> Signed-off-by: Linus Walleij <linus.walleij at linaro.org>
Applied to drm-misc-next.
Sam
> ---
> ChangeLog v1->v2:
> - Rebase onto v5.6-rc1
> - Account for changes in the panel struct and get_modes()
> passing the connector as argument.
> - Use specific full filename for the panel driver.
> - Update to match rename of DT binding file.
> - Drop select VIDEO_MODE_HELPERS
> - Fix spelling errors and stray characters, call 4bit groups
> nibbles rather than nybbles
> - Alphabetize includes and order them as requested by Sam
> - Drop the surplus videomode includes
> - Drop any backlight handling from .enable() and .disable()
> callbacks and rely on the backlight handling in the DRM
> panel core, but still assign a backlight from within the
> driver if we don't find one in the device tree.
> ---
> MAINTAINERS | 7 +
> drivers/gpu/drm/panel/Kconfig | 10 +
> drivers/gpu/drm/panel/Makefile | 1 +
> drivers/gpu/drm/panel/panel-novatek-nt35510.c | 1098 +++++++++++++++++
> 4 files changed, 1116 insertions(+)
> create mode 100644 drivers/gpu/drm/panel/panel-novatek-nt35510.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 17f502467c8a..8e7433d74530 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -5322,6 +5322,13 @@ F: drivers/gpu/drm/msm/
> F: include/uapi/drm/msm_drm.h
> F: Documentation/devicetree/bindings/display/msm/
>
> +DRM DRIVER FOR NOVATEK NT35510 PANELS
> +M: Linus Walleij <linus.walleij at linaro.org>
> +T: git git://anongit.freedesktop.org/drm/drm-misc
> +S: Maintained
> +F: drivers/gpu/drm/panel/panel-novatek-nt35510.c
> +F: Documentation/devicetree/bindings/display/panel/novatek,nt35510.yaml
> +
> DRM DRIVER FOR NVIDIA GEFORCE/QUADRO GPUS
> M: Ben Skeggs <bskeggs at redhat.com>
> L: dri-devel at lists.freedesktop.org
> diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> index 19eac3d799a7..b37495a5acce 100644
> --- a/drivers/gpu/drm/panel/Kconfig
> +++ b/drivers/gpu/drm/panel/Kconfig
> @@ -149,6 +149,16 @@ config DRM_PANEL_NEC_NL8048HL11
> panel (found on the Zoom2/3/3630 SDP boards). To compile this driver
> as a module, choose M here.
>
> +config DRM_PANEL_NOVATEK_NT35510
> + tristate "Novatek NT35510 RGB panel driver"
> + depends on OF
> + depends on DRM_MIPI_DSI
> + depends on BACKLIGHT_CLASS_DEVICE
> + help
> + Say Y here if you want to enable support for the panels built
> + around the Novatek NT35510 display controller, such as some
> + Hydis panels.
> +
> config DRM_PANEL_NOVATEK_NT39016
> tristate "Novatek NT39016 RGB/SPI panel"
> depends on OF && SPI
> diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> index c4ca0e3b9b3c..7bc8a57ede2b 100644
> --- a/drivers/gpu/drm/panel/Makefile
> +++ b/drivers/gpu/drm/panel/Makefile
> @@ -13,6 +13,7 @@ obj-$(CONFIG_DRM_PANEL_LEADTEK_LTK500HD1829) += panel-leadtek-ltk500hd1829.o
> obj-$(CONFIG_DRM_PANEL_LG_LB035Q02) += panel-lg-lb035q02.o
> obj-$(CONFIG_DRM_PANEL_LG_LG4573) += panel-lg-lg4573.o
> obj-$(CONFIG_DRM_PANEL_NEC_NL8048HL11) += panel-nec-nl8048hl11.o
> +obj-$(CONFIG_DRM_PANEL_NOVATEK_NT35510) += panel-novatek-nt35510.o
> obj-$(CONFIG_DRM_PANEL_NOVATEK_NT39016) += panel-novatek-nt39016.o
> obj-$(CONFIG_DRM_PANEL_OLIMEX_LCD_OLINUXINO) += panel-olimex-lcd-olinuxino.o
> obj-$(CONFIG_DRM_PANEL_ORISETECH_OTM8009A) += panel-orisetech-otm8009a.o
> diff --git a/drivers/gpu/drm/panel/panel-novatek-nt35510.c b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
> new file mode 100644
> index 000000000000..b4c014126781
> --- /dev/null
> +++ b/drivers/gpu/drm/panel/panel-novatek-nt35510.c
> @@ -0,0 +1,1098 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * Novatek NT35510 panel driver
> + * Copyright (C) 2020 Linus Walleij <linus.walleij at linaro.org>
> + * Based on code by Robert Teather (C) 2012 Samsung
> + *
> + * This display driver (and I refer to the physical component NT35510,
> + * not this Linux kernel software driver) can handle:
> + * 480x864, 480x854, 480x800, 480x720 and 480x640 pixel displays.
> + * It has 480x840x24bit SRAM embedded for storing a frame.
> + * When powered on the display is by default in 480x800 mode.
> + *
> + * The actual panels using this component have different names, but
> + * the code needed to set up and configure the panel will be similar,
> + * so they should all use the NT35510 driver with appropriate configuration
> + * per-panel, e.g. for physical size.
> + *
> + * This driver is for the DSI interface to panels using the NT35510.
> + *
> + * The NT35510 can also use an RGB (DPI) interface combined with an
> + * I2C or SPI interface for setting up the NT35510. If this is needed
> + * this panel driver should be refactored to also support that use
> + * case.
> + */
> +#include <linux/backlight.h>
> +#include <linux/bitops.h>
> +#include <linux/gpio/consumer.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/regmap.h>
> +#include <linux/regulator/consumer.h>
> +
> +#include <video/mipi_display.h>
> +
> +#include <drm/drm_mipi_dsi.h>
> +#include <drm/drm_modes.h>
> +#include <drm/drm_panel.h>
> +#include <drm/drm_print.h>
> +
> +#define MCS_CMD_MAUCCTR 0xF0 /* Manufacturer command enable */
> +#define MCS_CMD_READ_ID1 0xDA
> +#define MCS_CMD_READ_ID2 0xDB
> +#define MCS_CMD_READ_ID3 0xDC
> +#define MCS_CMD_MTP_READ_SETTING 0xF8 /* Uncertain about name */
> +#define MCS_CMD_MTP_READ_PARAM 0xFF /* Uncertain about name */
> +
> +/*
> + * These manufacturer commands are available after we enable manufacturer
> + * command set (MCS) for page 0.
> + */
> +#define NT35510_P0_DOPCTR 0xB1
> +#define NT35510_P0_SDHDTCTR 0xB6
> +#define NT35510_P0_GSEQCTR 0xB7
> +#define NT35510_P0_SDEQCTR 0xB8
> +#define NT35510_P0_SDVPCTR 0xBA
> +#define NT35510_P0_DPFRCTR1 0xBD
> +#define NT35510_P0_DPFRCTR2 0xBE
> +#define NT35510_P0_DPFRCTR3 0xBF
> +#define NT35510_P0_DPMCTR12 0xCC
> +
> +#define NT35510_P0_DOPCTR_LEN 2
> +#define NT35510_P0_GSEQCTR_LEN 2
> +#define NT35510_P0_SDEQCTR_LEN 4
> +#define NT35510_P0_SDVPCTR_LEN 1
> +#define NT35510_P0_DPFRCTR1_LEN 5
> +#define NT35510_P0_DPFRCTR2_LEN 5
> +#define NT35510_P0_DPFRCTR3_LEN 5
> +#define NT35510_P0_DPMCTR12_LEN 3
> +
> +#define NT35510_DOPCTR_0_RAMKP BIT(7) /* Contents kept in sleep */
> +#define NT35510_DOPCTR_0_DSITE BIT(6) /* Enable TE signal */
> +#define NT35510_DOPCTR_0_DSIG BIT(5) /* Enable generic read/write */
> +#define NT35510_DOPCTR_0_DSIM BIT(4) /* Enable video mode on DSI */
> +#define NT35510_DOPCTR_0_EOTP BIT(3) /* Support EoTP */
> +#define NT35510_DOPCTR_0_N565 BIT(2) /* RGB or BGR pixel format */
> +#define NT35510_DOPCTR_1_TW_PWR_SEL BIT(4) /* TE power selector */
> +#define NT35510_DOPCTR_1_CRGB BIT(3) /* RGB or BGR byte order */
> +#define NT35510_DOPCTR_1_CTB BIT(2) /* Vertical scanning direction */
> +#define NT35510_DOPCTR_1_CRL BIT(1) /* Source driver data shift */
> +#define NT35510_P0_SDVPCTR_PRG BIT(2) /* 0 = normal operation, 1 = VGLO */
> +#define NT35510_P0_SDVPCTR_AVDD 0 /* source driver output = AVDD */
> +#define NT35510_P0_SDVPCTR_OFFCOL 1 /* source driver output = off color */
> +#define NT35510_P0_SDVPCTR_AVSS 2 /* source driver output = AVSS */
> +#define NT35510_P0_SDVPCTR_HI_Z 3 /* source driver output = High impedance */
> +
> +/*
> + * These manufacturer commands are available after we enable manufacturer
> + * command set (MCS) for page 1.
> + */
> +#define NT35510_P1_SETAVDD 0xB0
> +#define NT35510_P1_SETAVEE 0xB1
> +#define NT35510_P1_SETVCL 0xB2
> +#define NT35510_P1_SETVGH 0xB3
> +#define NT35510_P1_SETVRGH 0xB4
> +#define NT35510_P1_SETVGL 0xB5
> +#define NT35510_P1_BT1CTR 0xB6
> +#define NT35510_P1_BT2CTR 0xB7
> +#define NT35510_P1_BT3CTR 0xB8
> +#define NT35510_P1_BT4CTR 0xB9 /* VGH boosting times/freq */
> +#define NT35510_P1_BT5CTR 0xBA
> +#define NT35510_P1_PFMCTR 0xBB
> +#define NT35510_P1_SETVGP 0xBC
> +#define NT35510_P1_SETVGN 0xBD
> +#define NT35510_P1_SETVCMOFF 0xBE
> +#define NT35510_P1_VGHCTR 0xBF /* VGH output ctrl */
> +#define NT35510_P1_SET_GAMMA_RED_POS 0xD1
> +#define NT35510_P1_SET_GAMMA_GREEN_POS 0xD2
> +#define NT35510_P1_SET_GAMMA_BLUE_POS 0xD3
> +#define NT35510_P1_SET_GAMMA_RED_NEG 0xD4
> +#define NT35510_P1_SET_GAMMA_GREEN_NEG 0xD5
> +#define NT35510_P1_SET_GAMMA_BLUE_NEG 0xD6
> +
> +/* AVDD and AVEE setting 3 bytes */
> +#define NT35510_P1_AVDD_LEN 3
> +#define NT35510_P1_AVEE_LEN 3
> +#define NT35510_P1_VGH_LEN 3
> +#define NT35510_P1_VGL_LEN 3
> +#define NT35510_P1_VGP_LEN 3
> +#define NT35510_P1_VGN_LEN 3
> +/* BT1CTR thru BT5CTR setting 3 bytes */
> +#define NT35510_P1_BT1CTR_LEN 3
> +#define NT35510_P1_BT2CTR_LEN 3
> +#define NT35510_P1_BT4CTR_LEN 3
> +#define NT35510_P1_BT5CTR_LEN 3
> +/* 52 gamma parameters times two per color: positive and negative */
> +#define NT35510_P1_GAMMA_LEN 52
> +
> +/**
> + * struct nt35510_config - the display-specific NT35510 configuration
> + *
> + * Some of the settings provide an array of bytes, A, B C which mean:
> + * A = normal / idle off mode
> + * B = idle on mode
> + * C = partial / idle off mode
> + *
> + * Gamma correction arrays are 10bit numbers, two consecutive bytes
> + * makes out one point on the gamma correction curve. The points are
> + * not linearly placed along the X axis, we get points 0, 1, 3, 5
> + * 7, 11, 15, 23, 31, 47, 63, 95, 127, 128, 160, 192, 208, 224, 232,
> + * 240, 244, 248, 250, 252, 254, 255. The voltages tuples form
> + * V0, V1, V3 ... V255, with 0x0000 being the lowest voltage and
> + * 0x03FF being the highest voltage.
> + *
> + * Each value must be strictly higher than the previous value forming
> + * a rising curve like this:
> + *
> + * ^
> + * | V255
> + * | V254
> + * | ....
> + * | V5
> + * | V3
> + * | V1
> + * | V0
> + * +------------------------------------------->
> + *
> + * The details about all settings can be found in the NT35510 Application
> + * Note.
> + */
> +struct nt35510_config {
> + /**
> + * @width_mm: physical panel width [mm]
> + */
> + u32 width_mm;
> + /**
> + * @height_mm: physical panel height [mm]
> + */
> + u32 height_mm;
> + /**
> + * @mode: the display mode. This is only relevant outside the panel
> + * in video mode: in command mode this is configuring the internal
> + * timing in the display controller.
> + */
> + const struct drm_display_mode mode;
> + /**
> + * @avdd: setting for AVDD ranging from 0x00 = 6.5V to 0x14 = 4.5V
> + * in 0.1V steps the default is 0x05 which means 6.0V
> + */
> + u8 avdd[NT35510_P1_AVDD_LEN];
> + /**
> + * @bt1ctr: setting for boost power control for the AVDD step-up
> + * circuit (1)
> + * bits 0..2 in the lower nibble controls PCK, the booster clock
> + * frequency for the step-up circuit:
> + * 0 = Hsync/32
> + * 1 = Hsync/16
> + * 2 = Hsync/8
> + * 3 = Hsync/4
> + * 4 = Hsync/2
> + * 5 = Hsync
> + * 6 = Hsync x 2
> + * 7 = Hsync x 4
> + * bits 4..6 in the upper nibble controls BTP, the boosting
> + * amplification for the the step-up circuit:
> + * 0 = Disable
> + * 1 = 1.5 x VDDB
> + * 2 = 1.66 x VDDB
> + * 3 = 2 x VDDB
> + * 4 = 2.5 x VDDB
> + * 5 = 3 x VDDB
> + * The defaults are 4 and 4 yielding 0x44
> + */
> + u8 bt1ctr[NT35510_P1_BT1CTR_LEN];
> + /**
> + * @avee: setting for AVEE ranging from 0x00 = -6.5V to 0x14 = -4.5V
> + * in 0.1V steps the default is 0x05 which means -6.0V
> + */
> + u8 avee[NT35510_P1_AVEE_LEN];
> + /**
> + * @bt2ctr: setting for boost power control for the AVEE step-up
> + * circuit (2)
> + * bits 0..2 in the lower nibble controls NCK, the booster clock
> + * frequency, the values are the same as for PCK in @bt1ctr.
> + * bits 4..5 in the upper nibble controls BTN, the boosting
> + * amplification for the the step-up circuit.
> + * 0 = Disable
> + * 1 = -1.5 x VDDB
> + * 2 = -2 x VDDB
> + * 3 = -2.5 x VDDB
> + * 4 = -3 x VDDB
> + * The defaults are 4 and 3 yielding 0x34
> + */
> + u8 bt2ctr[NT35510_P1_BT2CTR_LEN];
> + /**
> + * @vgh: setting for VGH ranging from 0x00 = 7.0V to 0x0B = 18.0V
> + * in 1V steps, the default is 0x08 which means 15V
> + */
> + u8 vgh[NT35510_P1_VGH_LEN];
> + /**
> + * @bt4ctr: setting for boost power control for the VGH step-up
> + * circuit (4)
> + * bits 0..2 in the lower nibble controls HCK, the booster clock
> + * frequency, the values are the same as for PCK in @bt1ctr.
> + * bits 4..5 in the upper nibble controls BTH, the boosting
> + * amplification for the the step-up circuit.
> + * 0 = AVDD + VDDB
> + * 1 = AVDD - AVEE
> + * 2 = AVDD - AVEE + VDDB
> + * 3 = AVDD x 2 - AVEE
> + * The defaults are 4 and 3 yielding 0x34
> + */
> + u8 bt4ctr[NT35510_P1_BT4CTR_LEN];
> + /**
> + * @vgl: setting for VGL ranging from 0x00 = -2V to 0x0f = -15V in
> + * 1V steps, the default is 0x08 which means -10V
> + */
> + u8 vgl[NT35510_P1_VGL_LEN];
> + /**
> + * @bt5ctr: setting for boost power control for the VGL step-up
> + * circuit (5)
> + * bits 0..2 in the lower nibble controls LCK, the booster clock
> + * frequency, the values are the same as for PCK in @bt1ctr.
> + * bits 4..5 in the upper nibble controls BTL, the boosting
> + * amplification for the the step-up circuit.
> + * 0 = AVEE + VCL
> + * 1 = AVEE - AVDD
> + * 2 = AVEE + VCL - AVDD
> + * 3 = AVEE x 2 - AVDD
> + * The defaults are 3 and 2 yielding 0x32
> + */
> + u8 bt5ctr[NT35510_P1_BT5CTR_LEN];
> + /**
> + * @vgp: setting for VGP, the positive gamma divider voltages
> + * VGMP the high voltage and VGSP the low voltage.
> + * The first byte contains bit 8 of VGMP and VGSP in bits 4 and 0
> + * The second byte contains bit 0..7 of VGMP
> + * The third byte contains bit 0..7 of VGSP
> + * VGMP 0x00 = 3.0V .. 0x108 = 6.3V in steps of 12.5mV
> + * VGSP 0x00 = 0V .. 0x111 = 3.7V in steps of 12.5mV
> + */
> + u8 vgp[NT35510_P1_VGP_LEN];
> + /**
> + * @vgn: setting for VGN, the negative gamma divider voltages,
> + * same layout of bytes as @vgp.
> + */
> + u8 vgn[NT35510_P1_VGN_LEN];
> + /**
> + * @sdeqctr: Source driver control settings, first byte is
> + * 0 for mode 1 and 1 for mode 2. Mode 1 uses two steps and
> + * mode 2 uses three steps meaning EQS3 is not used in mode
> + * 1. Mode 2 is default. The last three parameters are EQS1, EQS2
> + * and EQS3, setting the rise time for each equalizer step:
> + * 0x00 = 0.0 us to 0x0f = 7.5 us in steps of 0.5us. The default
> + * is 0x07 = 3.5 us.
> + */
> + u8 sdeqctr[NT35510_P0_SDEQCTR_LEN];
> + /**
> + * @sdvpctr: power/voltage behaviour during vertical porch time
> + */
> + u8 sdvpctr;
> + /**
> + * @t1: the number of pixel clocks on one scanline, range
> + * 0x100 (258 ticks) .. 0x3FF (1024 ticks) so the value + 1
> + * clock ticks.
> + */
> + u16 t1;
> + /**
> + * @vbp: vertical back porch toward the PANEL note: not toward
> + * the DSI host; these are separate interfaces, in from DSI host
> + * and out to the panel.
> + */
> + u8 vbp;
> + /**
> + * @vfp: vertical front porch toward the PANEL.
> + */
> + u8 vfp;
> + /**
> + * @psel: pixel clock divisor: 0 = 1, 1 = 2, 2 = 4, 3 = 8.
> + */
> + u8 psel;
> + /**
> + * @dpmctr12: Display timing control 12
> + * Byte 1 bit 4 selects LVGL voltage level: 0 = VGLX, 1 = VGL_REG
> + * Byte 1 bit 1 selects gate signal mode: 0 = non-overlap, 1 = overlap
> + * Byte 1 bit 0 selects output signal control R/L swap, 0 = normal
> + * 1 = swap all O->E, L->R
> + * Byte 2 is CLW delay clock for CK O/E and CKB O/E signals:
> + * 0x00 = 0us .. 0xFF = 12.75us in 0.05us steps
> + * Byte 3 is FTI_H0 delay time for STP O/E signals:
> + * 0x00 = 0us .. 0xFF = 12.75us in 0.05us steps
> + */
> + u8 dpmctr12[NT35510_P0_DPMCTR12_LEN];
> + /**
> + * @gamma_corr_pos_r: Red gamma correction parameters, positive
> + */
> + u8 gamma_corr_pos_r[NT35510_P1_GAMMA_LEN];
> + /**
> + * @gamma_corr_pos_g: Green gamma correction parameters, positive
> + */
> + u8 gamma_corr_pos_g[NT35510_P1_GAMMA_LEN];
> + /**
> + * @gamma_corr_pos_b: Blue gamma correction parameters, positive
> + */
> + u8 gamma_corr_pos_b[NT35510_P1_GAMMA_LEN];
> + /**
> + * @gamma_corr_neg_r: Red gamma correction parameters, negative
> + */
> + u8 gamma_corr_neg_r[NT35510_P1_GAMMA_LEN];
> + /**
> + * @gamma_corr_neg_g: Green gamma correction parameters, negative
> + */
> + u8 gamma_corr_neg_g[NT35510_P1_GAMMA_LEN];
> + /**
> + * @gamma_corr_neg_b: Blue gamma correction parameters, negative
> + */
> + u8 gamma_corr_neg_b[NT35510_P1_GAMMA_LEN];
> +};
> +
> +/**
> + * struct nt35510 - state container for the NT35510 panel
> + */
> +struct nt35510 {
> + /**
> + * @dev: the container device
> + */
> + struct device *dev;
> + /**
> + * @conf: the specific panel configuration, as the NT35510
> + * can be combined with many physical panels, they can have
> + * different physical dimensions and gamma correction etc,
> + * so this is stored in the config.
> + */
> + const struct nt35510_config *conf;
> + /**
> + * @panel: the DRM panel object for the instance
> + */
> + struct drm_panel panel;
> + /**
> + * @supplies: regulators supplying the panel
> + */
> + struct regulator_bulk_data supplies[2];
> + /**
> + * @reset_gpio: the reset line
> + */
> + struct gpio_desc *reset_gpio;
> +};
> +
> +/* Manufacturer command has strictly this byte sequence */
> +static const u8 nt35510_mauc_select_page_0[] = { 0x55, 0xAA, 0x52, 0x08, 0x00 };
> +static const u8 nt35510_mauc_select_page_1[] = { 0x55, 0xAA, 0x52, 0x08, 0x01 };
> +static const u8 nt35510_vgh_on[] = { 0x01 };
> +
> +static inline struct nt35510 *panel_to_nt35510(struct drm_panel *panel)
> +{
> + return container_of(panel, struct nt35510, panel);
> +}
> +
> +#define NT35510_ROTATE_0_SETTING 0x02
> +#define NT35510_ROTATE_180_SETTING 0x00
> +
> +static int nt35510_send_long(struct nt35510 *nt, struct mipi_dsi_device *dsi,
> + u8 cmd, u8 cmdlen, const u8 *seq)
> +{
> + const u8 *seqp = seq;
> + int cmdwritten = 0;
> + int chunk = cmdlen;
> + int ret;
> +
> + if (chunk > 15)
> + chunk = 15;
> + ret = mipi_dsi_dcs_write(dsi, cmd, seqp, chunk);
> + if (ret < 0) {
> + DRM_DEV_ERROR(nt->dev,
> + "error sending DCS command seq cmd %02x\n",
> + cmd);
> + return ret;
> + }
> + cmdwritten += chunk;
> + seqp += chunk;
> +
> + while (cmdwritten < cmdlen) {
> + chunk = cmdlen - cmdwritten;
> + if (chunk > 15)
> + chunk = 15;
> + ret = mipi_dsi_generic_write(dsi, seqp, chunk);
> + if (ret < 0) {
> + DRM_DEV_ERROR(nt->dev,
> + "error sending generic write seq %02x\n",
> + cmd);
> + return ret;
> + }
> + cmdwritten += chunk;
> + seqp += chunk;
> + }
> + DRM_DEV_DEBUG(nt->dev, "sent command %02x %02x bytes\n",
> + cmd, cmdlen);
> + return 0;
> +}
> +
> +static int nt35510_read_id(struct nt35510 *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + u8 id1, id2, id3;
> + int ret;
> +
> + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID1, &id1, 1);
> + if (ret < 0) {
> + DRM_DEV_ERROR(nt->dev, "could not read MTP ID1\n");
> + return ret;
> + }
> + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID2, &id2, 1);
> + if (ret < 0) {
> + DRM_DEV_ERROR(nt->dev, "could not read MTP ID2\n");
> + return ret;
> + }
> + ret = mipi_dsi_dcs_read(dsi, MCS_CMD_READ_ID3, &id3, 1);
> + if (ret < 0) {
> + DRM_DEV_ERROR(nt->dev, "could not read MTP ID3\n");
> + return ret;
> + }
> +
> + /*
> + * Multi-Time Programmable (?) memory contains manufacturer
> + * ID (e.g. Hydis 0x55), driver ID (e.g. NT35510 0xc0) and
> + * version.
> + */
> + DRM_DEV_INFO(nt->dev,
> + "MTP ID manufacturer: %02x version: %02x driver: %02x\n",
> + id1, id2, id3);
> +
> + return 0;
> +}
> +
> +/**
> + * nt35510_setup_power() - set up power config in page 1
> + * @nt: the display instance to set up
> + */
> +static int nt35510_setup_power(struct nt35510 *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + int ret;
> +
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETAVDD,
> + NT35510_P1_AVDD_LEN,
> + nt->conf->avdd);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT1CTR,
> + NT35510_P1_BT1CTR_LEN,
> + nt->conf->bt1ctr);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETAVEE,
> + NT35510_P1_AVEE_LEN,
> + nt->conf->avee);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT2CTR,
> + NT35510_P1_BT2CTR_LEN,
> + nt->conf->bt2ctr);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGH,
> + NT35510_P1_VGH_LEN,
> + nt->conf->vgh);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT4CTR,
> + NT35510_P1_BT4CTR_LEN,
> + nt->conf->bt4ctr);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_VGHCTR,
> + ARRAY_SIZE(nt35510_vgh_on),
> + nt35510_vgh_on);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGL,
> + NT35510_P1_VGL_LEN,
> + nt->conf->vgl);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_BT5CTR,
> + NT35510_P1_BT5CTR_LEN,
> + nt->conf->bt5ctr);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGP,
> + NT35510_P1_VGP_LEN,
> + nt->conf->vgp);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SETVGN,
> + NT35510_P1_VGN_LEN,
> + nt->conf->vgn);
> + if (ret)
> + return ret;
> +
> + /* Typically 10 ms */
> + usleep_range(10000, 20000);
> +
> + return 0;
> +}
> +
> +/**
> + * nt35510_setup_display() - set up display config in page 0
> + * @nt: the display instance to set up
> + */
> +static int nt35510_setup_display(struct nt35510 *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + const struct nt35510_config *conf = nt->conf;
> + u8 dopctr[NT35510_P0_DOPCTR_LEN];
> + u8 gseqctr[NT35510_P0_GSEQCTR_LEN];
> + u8 dpfrctr[NT35510_P0_DPFRCTR1_LEN];
> + /* FIXME: set up any rotation (assume none for now) */
> + u8 addr_mode = NT35510_ROTATE_0_SETTING;
> + u8 val;
> + int ret;
> +
> + /* Enable TE, EoTP and RGB pixel format */
> + dopctr[0] = NT35510_DOPCTR_0_DSITE | NT35510_DOPCTR_0_EOTP |
> + NT35510_DOPCTR_0_N565;
> + dopctr[1] = NT35510_DOPCTR_1_CTB;
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_DOPCTR,
> + NT35510_P0_DOPCTR_LEN,
> + dopctr);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_ADDRESS_MODE, &addr_mode,
> + sizeof(addr_mode));
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Source data hold time, default 0x05 = 2.5us
> + * 0x00..0x3F = 0 .. 31.5us in steps of 0.5us
> + * 0x0A = 5us
> + */
> + val = 0x0A;
> + ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDHDTCTR, &val,
> + sizeof(val));
> + if (ret < 0)
> + return ret;
> +
> + /* EQ control for gate signals, 0x00 = 0 us */
> + gseqctr[0] = 0x00;
> + gseqctr[1] = 0x00;
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_GSEQCTR,
> + NT35510_P0_GSEQCTR_LEN,
> + gseqctr);
> + if (ret)
> + return ret;
> +
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_SDEQCTR,
> + NT35510_P0_SDEQCTR_LEN,
> + conf->sdeqctr);
> + if (ret)
> + return ret;
> +
> + ret = mipi_dsi_dcs_write(dsi, NT35510_P0_SDVPCTR,
> + &conf->sdvpctr, 1);
> + if (ret < 0)
> + return ret;
> +
> + /*
> + * Display timing control for active and idle off mode:
> + * the first byte contains
> + * the two high bits of T1A and second byte the low 8 bits, and
> + * the valid range is 0x100 (257) to 0x3ff (1023) representing
> + * 258..1024 (+1) pixel clock ticks for one scanline. At 20MHz pixel
> + * clock this covers the range of 12.90us .. 51.20us in steps of
> + * 0.05us, the default is 0x184 (388) representing 389 ticks.
> + * The third byte is VBPDA, vertical back porch display active
> + * and the fourth VFPDA, vertical front porch display active,
> + * both given in number of scanlines in the range 0x02..0xff
> + * for 2..255 scanlines. The fifth byte is 2 bits selecting
> + * PSEL for active and idle off mode, how much the 20MHz clock
> + * is divided by 0..3. This needs to be adjusted to get the right
> + * frame rate.
> + */
> + dpfrctr[0] = (conf->t1 >> 8) & 0xFF;
> + dpfrctr[1] = conf->t1 & 0xFF;
> + /* Vertical back porch */
> + dpfrctr[2] = conf->vbp;
> + /* Vertical front porch */
> + dpfrctr[3] = conf->vfp;
> + dpfrctr[4] = conf->psel;
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR1,
> + NT35510_P0_DPFRCTR1_LEN,
> + dpfrctr);
> + if (ret)
> + return ret;
> + /* For idle and partial idle off mode we decrease front porch by one */
> + dpfrctr[3]--;
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR2,
> + NT35510_P0_DPFRCTR2_LEN,
> + dpfrctr);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPFRCTR3,
> + NT35510_P0_DPFRCTR3_LEN,
> + dpfrctr);
> + if (ret)
> + return ret;
> +
> + /* Enable TE on vblank */
> + ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
> + if (ret)
> + return ret;
> +
> + /* Turn on the pads? */
> + ret = nt35510_send_long(nt, dsi, NT35510_P0_DPMCTR12,
> + NT35510_P0_DPMCTR12_LEN,
> + conf->dpmctr12);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int nt35510_set_brightness(struct backlight_device *bl)
> +{
> + struct nt35510 *nt = bl_get_data(bl);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + u8 brightness = bl->props.brightness;
> + int ret;
> +
> + DRM_DEV_DEBUG(nt->dev, "set brightness %d\n", brightness);
> + ret = mipi_dsi_dcs_write(dsi, MIPI_DCS_SET_DISPLAY_BRIGHTNESS,
> + &brightness,
> + sizeof(brightness));
> + if (ret < 0)
> + return ret;
> +
> + return 0;
> +}
> +
> +static const struct backlight_ops nt35510_bl_ops = {
> + .update_status = nt35510_set_brightness,
> +};
> +
> +/*
> + * This power-on sequence
> + */
> +static int nt35510_power_on(struct nt35510 *nt)
> +{
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + int ret;
> +
> + ret = regulator_bulk_enable(ARRAY_SIZE(nt->supplies), nt->supplies);
> + if (ret < 0) {
> + dev_err(nt->dev, "unable to enable regulators\n");
> + return ret;
> + }
> +
> + /* Toggle RESET in accordance with datasheet page 370 */
> + if (nt->reset_gpio) {
> + gpiod_set_value(nt->reset_gpio, 1);
> + /* Active min 10 us according to datasheet, let's say 20 */
> + usleep_range(20, 1000);
> + gpiod_set_value(nt->reset_gpio, 0);
> + /*
> + * 5 ms during sleep mode, 120 ms during sleep out mode
> + * according to datasheet, let's use 120-140 ms.
> + */
> + usleep_range(120000, 140000);
> + }
> +
> + ret = nt35510_read_id(nt);
> + if (ret)
> + return ret;
> +
> + /* Set up stuff in manufacturer control, page 1 */
> + ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR,
> + ARRAY_SIZE(nt35510_mauc_select_page_1),
> + nt35510_mauc_select_page_1);
> + if (ret)
> + return ret;
> +
> + ret = nt35510_setup_power(nt);
> + if (ret)
> + return ret;
> +
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_POS,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_pos_r);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_POS,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_pos_g);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_POS,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_pos_b);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_RED_NEG,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_neg_r);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_GREEN_NEG,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_neg_g);
> + if (ret)
> + return ret;
> + ret = nt35510_send_long(nt, dsi, NT35510_P1_SET_GAMMA_BLUE_NEG,
> + NT35510_P1_GAMMA_LEN,
> + nt->conf->gamma_corr_neg_b);
> + if (ret)
> + return ret;
> +
> + /* Set up stuff in manufacturer control, page 0 */
> + ret = nt35510_send_long(nt, dsi, MCS_CMD_MAUCCTR,
> + ARRAY_SIZE(nt35510_mauc_select_page_0),
> + nt35510_mauc_select_page_0);
> + if (ret)
> + return ret;
> +
> + ret = nt35510_setup_display(nt);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int nt35510_power_off(struct nt35510 *nt)
> +{
> + int ret;
> +
> + ret = regulator_bulk_disable(ARRAY_SIZE(nt->supplies), nt->supplies);
> + if (ret)
> + return ret;
> +
> + if (nt->reset_gpio)
> + gpiod_set_value(nt->reset_gpio, 1);
> +
> + return 0;
> +}
> +
> +static int nt35510_unprepare(struct drm_panel *panel)
> +{
> + struct nt35510 *nt = panel_to_nt35510(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + int ret;
> +
> + ret = mipi_dsi_dcs_set_display_off(dsi);
> + if (ret) {
> + DRM_DEV_ERROR(nt->dev, "failed to turn display off (%d)\n",
> + ret);
> + return ret;
> + }
> + usleep_range(10000, 20000);
> +
> + /* Enter sleep mode */
> + ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
> + if (ret) {
> + DRM_DEV_ERROR(nt->dev, "failed to enter sleep mode (%d)\n",
> + ret);
> + return ret;
> + }
> +
> + /* Wait 4 frames, how much is that 5ms in the vendor driver */
> + usleep_range(5000, 10000);
> +
> + ret = nt35510_power_off(nt);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int nt35510_prepare(struct drm_panel *panel)
> +{
> + struct nt35510 *nt = panel_to_nt35510(panel);
> + struct mipi_dsi_device *dsi = to_mipi_dsi_device(nt->dev);
> + int ret;
> +
> + ret = nt35510_power_on(nt);
> + if (ret)
> + return ret;
> +
> + /* Exit sleep mode */
> + ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
> + if (ret) {
> + DRM_DEV_ERROR(nt->dev, "failed to exit sleep mode (%d)\n",
> + ret);
> + return ret;
> + }
> + /* Up to 120 ms */
> + usleep_range(120000, 150000);
> +
> + ret = mipi_dsi_dcs_set_display_on(dsi);
> + if (ret) {
> + DRM_DEV_ERROR(nt->dev, "failed to turn display on (%d)\n",
> + ret);
> + return ret;
> + }
> + /* Some 10 ms */
> + usleep_range(10000, 20000);
> +
> + return 0;
> +}
> +
> +static int nt35510_get_modes(struct drm_panel *panel,
> + struct drm_connector *connector)
> +{
> + struct nt35510 *nt = panel_to_nt35510(panel);
> + struct drm_display_mode *mode;
> + struct drm_display_info *info;
> +
> + info = &connector->display_info;
> + info->width_mm = nt->conf->width_mm;
> + info->height_mm = nt->conf->height_mm;
> + mode = drm_mode_duplicate(connector->dev, &nt->conf->mode);
> + if (!mode) {
> + DRM_ERROR("bad mode or failed to add mode\n");
> + return -EINVAL;
> + }
> + drm_mode_set_name(mode);
> + mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
> +
> + mode->width_mm = nt->conf->width_mm;
> + mode->height_mm = nt->conf->height_mm;
> + drm_mode_probed_add(connector, mode);
> +
> + return 1; /* Number of modes */
> +}
> +
> +static const struct drm_panel_funcs nt35510_drm_funcs = {
> + .unprepare = nt35510_unprepare,
> + .prepare = nt35510_prepare,
> + .get_modes = nt35510_get_modes,
> +};
> +
> +static int nt35510_probe(struct mipi_dsi_device *dsi)
> +{
> + struct device *dev = &dsi->dev;
> + struct nt35510 *nt;
> + int ret;
> +
> + nt = devm_kzalloc(dev, sizeof(struct nt35510), GFP_KERNEL);
> + if (!nt)
> + return -ENOMEM;
> + mipi_dsi_set_drvdata(dsi, nt);
> + nt->dev = dev;
> +
> + dsi->lanes = 2;
> + dsi->format = MIPI_DSI_FMT_RGB888;
> + /*
> + * Datasheet suggests max HS rate for NT35510 is 250 MHz
> + * (period time 4ns, see figure 7.6.4 page 365) and max LP rate is
> + * 20 MHz (period time 50ns, see figure 7.6.6. page 366).
> + * However these frequencies appear in source code for the Hydis
> + * HVA40WV1 panel and setting up the LP frequency makes the panel
> + * not work.
> + *
> + * TODO: if other panels prove to be closer to the datasheet,
> + * maybe make this a per-panel config in struct nt35510_config?
> + */
> + dsi->hs_rate = 349440000;
> + dsi->lp_rate = 9600000;
> + dsi->mode_flags = MIPI_DSI_CLOCK_NON_CONTINUOUS |
> + MIPI_DSI_MODE_EOT_PACKET;
> +
> + /*
> + * Every new incarnation of this display must have a unique
> + * data entry for the system in this driver.
> + */
> + nt->conf = of_device_get_match_data(dev);
> + if (!nt->conf) {
> + dev_err(dev, "missing device configuration\n");
> + return -ENODEV;
> + }
> +
> + nt->supplies[0].supply = "vdd"; /* 2.3-4.8 V */
> + nt->supplies[1].supply = "vddi"; /* 1.65-3.3V */
> + ret = devm_regulator_bulk_get(dev, ARRAY_SIZE(nt->supplies),
> + nt->supplies);
> + if (ret < 0)
> + return ret;
> + ret = regulator_set_voltage(nt->supplies[0].consumer,
> + 2300000, 4800000);
> + if (ret)
> + return ret;
> + ret = regulator_set_voltage(nt->supplies[1].consumer,
> + 1650000, 3300000);
> + if (ret)
> + return ret;
> +
> + nt->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_ASIS);
> + if (IS_ERR(nt->reset_gpio)) {
> + dev_err(dev, "error getting RESET GPIO\n");
> + return PTR_ERR(nt->reset_gpio);
> + }
> +
> + drm_panel_init(&nt->panel, dev, &nt35510_drm_funcs,
> + DRM_MODE_CONNECTOR_DSI);
> +
> + /*
> + * First, try to locate an external backlight (such as on GPIO)
> + * if this fails, assume we will want to use the internal backlight
> + * control.
> + */
> + ret = drm_panel_of_backlight(&nt->panel);
> + if (ret) {
> + dev_err(dev, "error getting external backlight %d\n", ret);
> + return ret;
> + }
> + if (!nt->panel.backlight) {
> + struct backlight_device *bl;
> +
> + bl = devm_backlight_device_register(dev, "nt35510", dev, nt,
> + &nt35510_bl_ops, NULL);
> + if (IS_ERR(bl)) {
> + DRM_DEV_ERROR(dev, "failed to register backlight device\n");
> + return PTR_ERR(bl);
> + }
> + bl->props.max_brightness = 255;
> + bl->props.brightness = 255;
> + bl->props.power = FB_BLANK_POWERDOWN;
> + nt->panel.backlight = bl;
> + }
> +
> + ret = drm_panel_add(&nt->panel);
> + if (ret < 0)
> + return ret;
> +
> + ret = mipi_dsi_attach(dsi);
> + if (ret < 0)
> + drm_panel_remove(&nt->panel);
> +
> + return 0;
> +}
> +
> +static int nt35510_remove(struct mipi_dsi_device *dsi)
> +{
> + struct nt35510 *nt = mipi_dsi_get_drvdata(dsi);
> + int ret;
> +
> + mipi_dsi_detach(dsi);
> + /* Power off */
> + ret = nt35510_power_off(nt);
> + drm_panel_remove(&nt->panel);
> +
> + return ret;
> +}
> +
> +/*
> + * These gamma correction values are 10bit tuples, so only bits 0 and 1 is
> + * ever used in the first byte. They form a positive and negative gamma
> + * correction curve for each color, values must be strictly higher for each
> + * step on the curve. As can be seen these default curves goes from 0x0001
> + * to 0x03FE.
> + */
> +#define NT35510_GAMMA_POS_DEFAULT 0x00, 0x01, 0x00, 0x43, 0x00, \
> + 0x6B, 0x00, 0x87, 0x00, 0xA3, 0x00, 0xCE, 0x00, 0xF1, 0x01, \
> + 0x27, 0x01, 0x53, 0x01, 0x98, 0x01, 0xCE, 0x02, 0x22, 0x02, \
> + 0x83, 0x02, 0x78, 0x02, 0x9E, 0x02, 0xDD, 0x03, 0x00, 0x03, \
> + 0x2E, 0x03, 0x54, 0x03, 0x7F, 0x03, 0x95, 0x03, 0xB3, 0x03, \
> + 0xC2, 0x03, 0xE1, 0x03, 0xF1, 0x03, 0xFE
> +
> +#define NT35510_GAMMA_NEG_DEFAULT 0x00, 0x01, 0x00, 0x43, 0x00, \
> + 0x6B, 0x00, 0x87, 0x00, 0xA3, 0x00, 0xCE, 0x00, 0xF1, 0x01, \
> + 0x27, 0x01, 0x53, 0x01, 0x98, 0x01, 0xCE, 0x02, 0x22, 0x02, \
> + 0x43, 0x02, 0x50, 0x02, 0x9E, 0x02, 0xDD, 0x03, 0x00, 0x03, \
> + 0x2E, 0x03, 0x54, 0x03, 0x7F, 0x03, 0x95, 0x03, 0xB3, 0x03, \
> + 0xC2, 0x03, 0xE1, 0x03, 0xF1, 0x03, 0xFE
> +
> +/*
> + * The Hydis HVA40WV1 panel
> + */
> +static const struct nt35510_config nt35510_hydis_hva40wv1 = {
> + .width_mm = 52,
> + .height_mm = 86,
> + /**
> + * As the Hydis panel is used in command mode, the porches etc
> + * are settings programmed internally into the NT35510 controller
> + * and generated toward the physical display. As the panel is not
> + * used in video mode, these are not really exposed to the DSI
> + * host.
> + *
> + * Display frame rate control:
> + * Frame rate = (20 MHz / 1) / (389 * (7 + 50 + 800)) ~= 60 Hz
> + */
> + .mode = {
> + /* The internal pixel clock of the NT35510 is 20 MHz */
> + .clock = 20000000,
> + .hdisplay = 480,
> + .hsync_start = 480 + 2, /* HFP = 2 */
> + .hsync_end = 480 + 2 + 0, /* HSync = 0 */
> + .htotal = 480 + 2 + 0 + 5, /* HFP = 5 */
> + .vdisplay = 800,
> + .vsync_start = 800 + 2, /* VFP = 2 */
> + .vsync_end = 800 + 2 + 0, /* VSync = 0 */
> + .vtotal = 800 + 2 + 0 + 5, /* VBP = 5 */
> + .vrefresh = 60, /* Calculated */
> + .flags = 0,
> + },
> + /* 0x09: AVDD = 5.6V */
> + .avdd = { 0x09, 0x09, 0x09 },
> + /* 0x34: PCK = Hsync/2, BTP = 2 x VDDB */
> + .bt1ctr = { 0x34, 0x34, 0x34 },
> + /* 0x09: AVEE = -5.6V */
> + .avee = { 0x09, 0x09, 0x09 },
> + /* 0x24: NCK = Hsync/2, BTN = -2 x VDDB */
> + .bt2ctr = { 0x24, 0x24, 0x24 },
> + /* 0x05 = 12V */
> + .vgh = { 0x05, 0x05, 0x05 },
> + /* 0x24: NCKA = Hsync/2, VGH = 2 x AVDD - AVEE */
> + .bt4ctr = { 0x24, 0x24, 0x24 },
> + /* 0x0B = -13V */
> + .vgl = { 0x0B, 0x0B, 0x0B },
> + /* 0x24: LCKA = Hsync, VGL = AVDD + VCL - AVDD */
> + .bt5ctr = { 0x24, 0x24, 0x24 },
> + /* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */
> + .vgp = { 0x00, 0xA3, 0x00 },
> + /* VGMP: 0x0A3 = 5.0375V, VGSP = 0V */
> + .vgn = { 0x00, 0xA3, 0x00 },
> + /* SDEQCTR: source driver EQ mode 2, 2.5 us rise time on each step */
> + .sdeqctr = { 0x01, 0x05, 0x05, 0x05 },
> + /* SDVPCTR: Normal operation off color during v porch */
> + .sdvpctr = 0x01,
> + /* T1: number of pixel clocks on one scanline: 0x184 = 389 clocks */
> + .t1 = 0x0184,
> + /* VBP: vertical back porch toward the panel */
> + .vbp = 7,
> + /* VFP: vertical front porch toward the panel */
> + .vfp = 50,
> + /* PSEL: divide pixel clock 20MHz with 1 (no clock downscaling) */
> + .psel = 0,
> + /* DPTMCTR12: 0x03: LVGL = VGLX, overlap mode, swap R->L O->E */
> + .dpmctr12 = { 0x03, 0x00, 0x00, },
> + /* Default gamma correction values */
> + .gamma_corr_pos_r = { NT35510_GAMMA_POS_DEFAULT },
> + .gamma_corr_pos_g = { NT35510_GAMMA_POS_DEFAULT },
> + .gamma_corr_pos_b = { NT35510_GAMMA_POS_DEFAULT },
> + .gamma_corr_neg_r = { NT35510_GAMMA_NEG_DEFAULT },
> + .gamma_corr_neg_g = { NT35510_GAMMA_NEG_DEFAULT },
> + .gamma_corr_neg_b = { NT35510_GAMMA_NEG_DEFAULT },
> +};
> +
> +static const struct of_device_id nt35510_of_match[] = {
> + {
> + .compatible = "hydis,hva40wv1",
> + .data = &nt35510_hydis_hva40wv1,
> + },
> + { }
> +};
> +MODULE_DEVICE_TABLE(of, nt35510_of_match);
> +
> +static struct mipi_dsi_driver nt35510_driver = {
> + .probe = nt35510_probe,
> + .remove = nt35510_remove,
> + .driver = {
> + .name = "panel-novatek-nt35510",
> + .of_match_table = nt35510_of_match,
> + },
> +};
> +module_mipi_dsi_driver(nt35510_driver);
> +
> +MODULE_AUTHOR("Linus Walleij <linus.walleij at linaro.org>");
> +MODULE_DESCRIPTION("NT35510-based panel driver");
> +MODULE_LICENSE("GPL v2");
> --
> 2.21.1
More information about the dri-devel
mailing list