[RESEND PATCH v6 16/17] drm/mediatek: add fifo_size into rdma private data
Yongqiang Niu
yongqiang.niu at mediatek.com
Fri Jan 3 03:12:27 UTC 2020
the fifo size of rdma in mt8183 is different.
rdma0 fifo size is 5k
rdma1 fifo size is 2k
Signed-off-by: Yongqiang Niu <yongqiang.niu at mediatek.com>
---
drivers/gpu/drm/mediatek/mtk_disp_rdma.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
index 405afef..0e0af04a 100644
--- a/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
+++ b/drivers/gpu/drm/mediatek/mtk_disp_rdma.c
@@ -62,6 +62,7 @@ struct mtk_disp_rdma {
struct mtk_ddp_comp ddp_comp;
struct drm_crtc *crtc;
const struct mtk_disp_rdma_data *data;
+ u32 fifo_size;
};
static inline struct mtk_disp_rdma *comp_to_rdma(struct mtk_ddp_comp *comp)
@@ -130,10 +131,16 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
unsigned int threshold;
unsigned int reg;
struct mtk_disp_rdma *rdma = comp_to_rdma(comp);
+ u32 rdma_fifo_size;
rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_0, 0xfff, width);
rdma_update_bits(comp, DISP_REG_RDMA_SIZE_CON_1, 0xfffff, height);
+ if (rdma->fifo_size)
+ rdma_fifo_size = rdma->fifo_size;
+ else
+ rdma_fifo_size = RDMA_FIFO_SIZE(rdma);
+
/*
* Enable FIFO underflow since DSI and DPI can't be blocked.
* Keep the FIFO pseudo size reset default of 8 KiB. Set the
@@ -142,7 +149,7 @@ static void mtk_rdma_config(struct mtk_ddp_comp *comp, unsigned int width,
*/
threshold = width * height * vrefresh * 4 * 7 / 1000000;
reg = RDMA_FIFO_UNDERFLOW_EN |
- RDMA_FIFO_PSEUDO_SIZE(RDMA_FIFO_SIZE(rdma)) |
+ RDMA_FIFO_PSEUDO_SIZE(rdma_fifo_size) |
RDMA_OUTPUT_VALID_FIFO_THRESHOLD(threshold);
writel(reg, comp->regs + DISP_REG_RDMA_FIFO_CON);
}
@@ -284,6 +291,16 @@ static int mtk_disp_rdma_probe(struct platform_device *pdev)
return comp_id;
}
+ if (of_find_property(dev->of_node, "mediatek,rdma_fifo_size", &ret)) {
+ ret = of_property_read_u32(dev->of_node,
+ "mediatek,rdma_fifo_size",
+ &priv->fifo_size);
+ if (ret) {
+ dev_err(dev, "Failed to get rdma fifo size\n");
+ return ret;
+ }
+ }
+
ret = mtk_ddp_comp_init(dev, dev->of_node, &priv->ddp_comp, comp_id,
&mtk_disp_rdma_funcs);
if (ret) {
--
1.8.1.1.dirty
More information about the dri-devel
mailing list